COILCRAFT XFL3010

Document 727-1
Shielded Power Inductors – XFL3010
• High current, magnetically shielded power inductors
• Only 1 mm high with a 3 mm × 3 mm footprint
Designer’s Kit C440 contains 5 of each XFL3010 and XFL3012 value
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weight 44 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
PCB washing Only pure water or alcohol recommended
Isat (A)5
Irms (A)5
Inductance2
DCR (Ohms)3
SRF typ4
Part number1
±20% (µH)
nom max
(MHz)
10% drop 20% drop 30% drop 20°C rise 40°C rise
XFL3010-601ME_ 0.60 0.030 0.033 180 1.8 2.4 2.7 1.82.5
XFL3010-102ME_ 1.0
0.043 0.049 128 1.5 2.1 2.4 1.62.3
XFL3010-152ME_ 1.5
0.071 0.080 97.0 1.2 1.6 1.9 1.41.9
XFL3010-222ME_ 2.2
0.111 0.122 78.0 0.941.2 1.5 1.01.3
XFL3010-332ME_ 3.3
0.154 0.166 64.0 0.86 1.1 1.3
0.881.2
XFL3010-472ME_ 4.7
0.217 0.230 57.0 0.71 0.97 1.1
0.841.1
XFL3010-682ME_ 6.8
0.315 0.346 42.0 0.56 0.78 0.92 0.720.95
XFL3010-103ME_ 10
0.472 0.519 35.0 0.44 0.61 0.71 0.620.82
XFL3010-153ME_ 15
0.521 0.560 28.4 0.33 0.45 0.53 0.560.76
XFL3010-223ME_ 22
0.770 0.818 21.7 0.26 0.35 0.40 0.480.66
XFL3010-333ME_ 33
1.12
1.20
17.5 0.22 0.30 0.35 0.410.56
XFL3010-393ME_ 39
1.23
1.40
16.9 0.21 0.29 0.33 0.370.51
XFL3010-473ME_ 47
1.71
1.93
14.4 0.16 0.23 0.27 0.330.44
XFL3010-563ME_ 56
1.95 2.16 13.6 0.16 0.220.25 0.3 0.41
XFL3010-683ME_ 68
2.32
2.60
12.7 0.15 0.21 0.24 0.270.36
XFL3010-823ME_ 82
2.77
3.10
11.6 0.14 0.20 0.23 0.260.34
XFL3010-104ME_100
4.64
5.50
10.1 0.13 0.19 0.22 0.200.29
XFL3010-224ME_220
9.91 12.0
6.9 0.08 0.12 0.14 0.140.19
1. When ordering, please specify packaging code:
XFL3010-222MEC
Packaging:C=7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 727-1 Revised 07/03/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 727-2
Shielded Power Inductors – XFL3010
Typical L vs Frequency
1000
XXX
220 µH
100 µH
Inductance (µH)
100
0.118 ±0.008
3,0 ±0,2
Parts manufactured prior
to January 2011 may not
have part marking.
0.118 ±0.008
3,0 ±0,2
33 µH
10 µH
10
Recommended
Land Pattern
0.043 max
1,1
3.3 µH
0.082
2,08
1.0 µH
1
0.126
3,2
0.1
0.1
1
10
100
Frequency (MHz)
0.043 min
1,1
Dimensions are in
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
0.044
1,12
inches
mm
Document 727-2 Revised 04/09/12
07/03/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 727-3
Shielded Power Inductors – XFL3010
Inductance (µH)
1.0
0.8
0.60 µH
0.6
0.4
0.2
0
0
0.5
1.0
1.5
Current (A)
2.0
2.5
3.0
1.0
Inductance (µH)
1.5
1.0 µH
0.5
0
0
0.5
1.0
1.5
Current (A)
2.0
2.5
3.0
Inductance (µH)
2.0
1.5
1.5 µH
1.0
0.5
0
0
0.25
0.50
0.75
1.00
1.25
1.50
Current (A)
1.75
2.00
2.25 2.50
2
Inductance (µH)
3
2.2 µH
1
0
0
0.25
0.50
0.75
1.00
1.25
Current (A)
1.50
1.75
2.00
5
4
3
3.3 µH
2
1
0
0
0.25
0.50
0.75
1.00
1.25
Current (A)
1.50
1.75
2.00
6
5
4
4.7 µH
3
2
1
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
Current (A)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Typical L vs Current
10
8
6.8 µH
6
4
2
0
0
0.1
0.2
0.3
0.4
0.5
0.6
Current (A)
0.7
0.8
0.9
1.0
15
10
10 µH
5
0
0
0.1
0.2
0.3
0.4
0.5
0.6
Current (A)
0.7
0.8
20
15
15 µH
10
5
0
0
0.1
0.2
0.3
0.4
Current (A)
0.5
0.6
0.7
30
20
22 µH
10
0
0
0.05
0.10
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
0.15
0.20
0.25
0.30
Current (A)
0.35
0.40
0.45 0.50
Document 727-3 Revised 07/03/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 727-4
Shielded Power Inductors – XFL3010
Inductance (µH)
50
40
30
33 µH
20
10
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
Current (A)
0.40
0.45 0.50
Inductance (µH)
50
40
30
39 µH
20
10
0
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
Current (A)
0.40
0.45 0.50
40
Inductance (µH)
60
50
47 µH
30
20
10
0
80
70
60
50
40
30
20
10
0
0
0.05
0.10
0.15
0.20
0.25
Current (A)
0.30
0.35
0.40
90
82 µH
60
30
0
0
0.05
0.10
0.15
Current (A)
0.20
0.25
0.30
0.20
0.25
0.30
150
100
100 µH
50
0
0
0.05
0.10
0.15
Current (A)
300
220 µH
200
100
0
0
0.025 0.050 0.075 0.100 0.125 0.150 0.175 0.200 0.225 0.25
Current (A)
Typical Irms Derating
56 µH
120
110
100
0
0.05
0.10
0.15
Current (A)
0.20
0.25
0.30
100
80
60
68 µH
40
90
80
70
60
50
40
30
20
20
0
120
25°C
0
Percent of rated Irms
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Typical L vs Current
10
0
0.05
0.10
0.15
Current (A)
0.20
0.25
0.30
0
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 727-4 Revised 07/03/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.