Document 414 ADSL2 Transformer For Broadcom BCM6348 Router Chip • Designed for use with the Broadcom BCM6348 router chip • Low leakage inductance and 1875 V interwinding isolation • Evaluated and approved by UL to meet 60950 under a Supplementary Insulation System with a working voltage of 250 Vrms, 353.5 V peak. Core material Ferrite Terminations RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 6.2 g Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 175 per 13″ reel Plastic tape: 32 mm wide, 0.42 mm thick, 28 mm pocket spacing, 12.9 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf Line side Leakage Longitudinal Part Turns ratio inductance2 inductance3 Capacitance4 DCR max (Ohms) balanceTHD 1 number line : chip ±5% (µH) max (µH) max (pF) chip side line side min (dB) max (dB) B0727-BL_ 2 : 1 409.5 6.5 65.0 0.645 (1-4) 0.645 (2-5) 0.284 (10-7) 0.371 ((9-6) 50.0 (1.1 MHz) –80 1. When ordering, please specify termination and packaging coded: B0727-BLD Termination: L =RoHS tin-silver over tin over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance measured at 10 kHz, 0.1 Vrms, 0 Adc with windings connected in series. 3. Leakage inductance measured at 100 kHz, 0.1 Vrms, 0 Adc from pins 1 to 5 with pins 4 and 2 connected and all chip side pins shorted. 4. Capacitance measured at 100 kHz, 0.1 Vrms, 0 Adc from chip side to line side. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 1 Line 4 side 2 10 0.061 1,55 0.590 14,99 7 Chip 9 side Recommended Land Pattern Dot above pin1 0.500 max 12,70 6 Dimensions are in 0.699 max 17,75 0.050 1,27 0.512 13,00 1 0.098 2,50 0.028 10 0,70 0.098 2,50 0.530 max 13,46 5 1 5 0.004 /0,10 0.039 1,00 6 inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 414 Revised 10/20/08 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.