ADSL Magnetics EP-7 Surface-Mount Inductors TM00329 • Designed with two well balanced and coupled windings for use in ADSL applications where filtering is required • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Operating temperature range: -40° C to +85° C • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • Meets IEC 695, 2-2 flammability requirements ELECTRICAL SPECIFICATIONS AT 25° C Inductance1 µH ±5% DCR Ω max (1-4) (1-4) S560-6100-09 20.6 0.25 S560-6100-10 73.6 0.5 S560-6100-11 103.25 0.5 Part Number 1. measured at 0.1 Vac, 10 kHz Turns Ratio1 ± 1% Inductance2 µH ± 5% Leakage Inductance3 µH max (1-5) : (2-4) (1-5) (1-5) (1-5) S560-6100-12 1:1 88 5 S560-6100-13 1:1 99 S560-6100-14 1:1 S560-6100-15 S560-6100-33 Part Number DCR Ω max Direct Capacitance4 pF max Dielectric Rating Vrms (2-4) (1-5) & (2-4) (1-5) to (2-4) 0.65 0.65 100 1000 5 0.7 0.7 100 1000 120.5 5 0.55 0.55 100 1000 1:1 129.5 5 0.55 0.55 100 1000 1:1 2 mH 5 8.5 8.5 - 1000 1. measured at 20 kHz, 1 Vrms 2. measured at 0.1 Vac, 10 kHz 3. measured at 0.1 Vac, 100 kHz, short terminals 2 & 4 4. measured at 1 Vrms, 1 kHz Part Number S560-6100-24 Turns Ratio1 ± 1% DCR Ω max Inductance2 mH Dielectric Rating Vac (1-3) : (4-6) (1-3) (1-6)3 (1-3) (4-6) between 1 & core4 1:1 0.5 2 1.65 1.65 600 1. measured at 20 kHz, 1 Vrms 2. measured at 10 kHz, 0.1 Vrms 3. connect 3 to 4 4. connect 3 to 6 ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-75 ADSL Magnetics EP-7 Surface-Mount Inductors TM00329 SCHEMATIC S560-6100-12 S560-6100-13 S506-6100-14 S560-6100-15 S560-6100-33 S560-6100-09 S560-6100-10 S560-6100-11 S560-6100-24 1 4 3 6 1 2 1 4 4 5 MECHANICAL S560-6100-09 S560-6100-10 S560-6100-11 S560-6100-12 S560-6100-13 S506-6100-14 S560-6100-15 S560-6100-24 S560-6100-33 1 2 3 0.370 (9.40) MAX 6 5 0.098 (2.50) TYP 4 0.545 (13.84) 0.090 (2.29) TYP 0.052 (1.32) TYP 0.420 (10.67) MAX 3 4 2 5 1 6 SUGGESTED PCB PAD LAYOUT 0.3650 (9.14) MAX 0.098 (2.50) 0.028 (0.70) TYP (PHOSPHOR BRONZE, SOLDER COATED) 0.417 (10.60) 0.520 (13.21) MAX ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-76