BCR

Document 334R-1
SMT Broadband Conical Inductors
• Full-length cap fully protects the coil and provides a large
surface for pick and place.
• The self positioning mounting bracket has four soldered
pads for excellent board adhesion.
• Designed specifically for broadband and high frequency
applications.
• Operates as a series of narrow-band inductors throughout
an operating frequency range of 10 MHz to 40 GHz.
• Ideal for use in ultra-wideband bias T’s, where the conical inductor provides the path for the DC bias injection or extraction
while isolating the power source from the active device.
• For a “flying lead” version that allows adjustment of the
mounting angle consider the BCL series
Inductance2
Part
DCR max
number1
±5% (µH)
(Ohms)
BCR-221JL_0.22 0.10
BCR-531JL_0.53 0.15
BCR-122JL_1.20 1.05
BCR-162JL_1.65 0.60
BCR-232JL_2.35 1.61
BCR-272JL_2.75 0.40
BCR-632JL_6.35 0.92
BCR-652JL_6.50 0.70
BCR-802JL_8.00 3.39
Irms3
(mA)
1200
1060
270
490
270
675
480
650
230
1. When ordering, please specify termination and packaging codes:
BCR-802JLC
Termination:L= Tin-silver-copper over silver-platinum-glass frit
Special order, added cost:
S = Tin-lead over silver-platinum-glass frit
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic
tape.
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
2. Inductance measured at 10 MHz, 0.1 Vrms, 0 Adc using an Agilent/HP
16193A fixture in an Agilent/HP 4287A LCR meter or equivalents.
3. Current that causes a 40°C temperature rise from 25°C ambient.
4. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Terminations Tin-silver-copper over silver-platinum-glass frit
Other terminations available at additional cost.
Weights BCR-122: 34 mg
BCR-221, BCR-162, BCR-232, BCR-531: 101 mg
BCR-272, BCR-632, BCR-652: 472 mg
BCR-802: 107 mg
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging
BCR-122:
500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide, 0.36 mm thick,
8 mm pocket spacing, 3.51 mm pocket depth
BCR-162, BCR-221, BCR-232, BCR-531, BCR-802:
300/7″ reel; 1500/13″ reel Plastic tape: 12 mm wide, 0.36 mm thick,
8 mm pocket spacing, 4.83 mm pocket depth
BCR-272, BCR-632, BCR-652:
200/7″ reel; 750/13″ reel Plastic tape: 24 mm wide, 0.33 mm thick,
12 mm pocket spacing, 6.45 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 334R-1 Revised 01/30/14
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 334R-2
SMT Broadband Conical Inductors
BCR-122
BCR-162, -221, -232, -531, -802
BCR-272, -632, -652
Top View
Top View
Top View
A
A
A
Dot indicates pin1.
Dot indicates pin1.
Dot indicates pin1.
B
B
B
Side View
Side View
Side View
Front View
C
C
C
Recommended
Land Pattern
Recommended
Land Pattern
D
D
*
*
*
2
1
D
2
Recommended
Land Pattern
*
*
2
F
F
F
D
D
Front View
Front View
E
*
D
1
D
E
D
*
D
1
D
E
D
Pad is for mounting stability only; do not connect to circuit. Connecting to circuit may adversely affect performance.
BCR-122
BCR-162, -221, -232, -531, -802
BCR-272, -632, -652:
A
B
C
D EF
0.105 ±0.010 / 2,67 ±0,25 0.120 ±0.010 / 3,05 ±0,25 0.110 ±0.010 / 2,79 ±0,250.030 / 0,760.070 / 1,780.050 / 1,27
0.150 ±0.010/ 3,81±0,25 0.220 ±0.010 / 5,59 ±0,25 0.160 ±0.010 / 4,06 ±0,250.040 / 1,020.150 / 3,810.080 / 2,03
0.220 ±0.010 / 5,59 ±0,25 0.440 ±0.010 / 11,18 ±0,25 0.220 ±0.010 / 5,59 ±0,250.050 / 1,270.360 / 9,140.140 / 3,56
Dimensions (inches /millimeters)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 334R-2 Revised 01/30/14
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 334R-3
SMT Broadband Conical Inductors
Insertion Loss
Return Loss
0
0.5
10
S11 (dB)
S21 (dB)
0
-221
1.0
1.5
2.0
2.5
-221
20
30
40
0.05
5
10
15
20
25
30
35
50
40 45
0.05
5
10
Frequency (GHz)
S11 (dB)
S21 (dB)
1.5
2.0
0.05
5
10
15
20
25
30
35
50
40 45
-531
0.05
5
10
20
25
30
35
40 45
0
-122
1.0
1.5
10
S11 (dB)
S21 (dB)
15
Frequency (GHz)
0.5
2.0
-122
20
30
40
0.05
5
10
15
20
25
30
35
50
40 45
0.05
5
10
Frequency (GHz)
15
20
25
30
35
40 45
Frequency (GHz)
0
0
0.5
10
1.0
-162
1.5
S11 (dB)
S21 (dB)
40 45
30
40
0
2.0
-162
20
30
40
0.05
5
10
15
20
25
30
35
50
40 45
0.05
5
10
Frequency (GHz)
15
20
25
30
35
40 45
Frequency (GHz)
0
0
0.5
-232
10
S11 (dB)
S21 (dB)
35
20
Frequency (GHz)
1.0
1.5
2.0
2.5
30
10
1.0
2.5
25
0
-531
0.5
2.5
20
Frequency (GHz)
0
2.5
15
20
-232
30
40
0.05
5
10
15
20
25
30
35
40 45
50
0.05
5
10
Frequency (GHz)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
15
20
25
30
35
40 45
Frequency (GHz)
Document 334R-2 Revised 01/30/14
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 334R-4
SMT Broadband Conical Inductors
Insertion Loss
Return Loss
0
0
-272
10
S11 (dB)
S21 (dB)
0.5
1.0
1.5
30
40
2.0
2.5
-272
20
0.05
5
10
15
20
25
30
35
50
40 45
0.05
5
10
0
S11 (dB)
S21 (dB)
1.5
0.05
5
10
15
20
25
30
35
40 45
-632
30
50
40 45
0.05
5
10
15
20
25
30
35
40 45
Frequency (GHz)
0
0
-652
10
S11 (dB)
0.5
S21 (dB)
35
20
Frequency (GHz)
1.0
1.5
-652
20
30
40
2.0
0.05
5
10
15
20
25
30
35
50
40 45
0.05
5
10
15
20
25
30
35
40 45
Frequency (GHz)
Frequency (GHz)
0
0
0.5
10
1.0
1.5
-802
S11 (dB)
S21 (dB)
30
40
2.0
-802
20
30
40
2.0
2.5
25
10
-632
1.0
2.5
20
0
0.5
2.5
15
Frequency (GHz)
Frequency (GHz)
0.05
5
10
15
20
25
30
35
40 45
50
0.05
5
10
Frequency (GHz)
15
20
25
30
35
40 45
Frequency (GHz)
Response curves measured in a bias tee configuration with an Agilent/
HP 8722ES network analyzer.
Port 1
Port 2
1
2
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 334R-2 Revised 01/30/14
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.