DA2025-AL

Document 488
SMT Planar Transformer
For TI LM5035
PWM Controller
The DA2025-AL surface mount planar transformer is approved by Texas Instruments for use with its LM5035 PWM
Controller with Integrated 105 V Half-Bridge and SyncFET
Drivers. It is listed in AN-1435 LM5035 Evaluation Board
Application Note.
This transformer is designed for 100 Watt applications
and can handle current up to 30 A. It features excellent
DCR, very low leakage inductance and 1500 Vdc primary
to secondary isolation.
Coilcraft can also design custom planar transformers with
different turns ratios and with an auxiliary winding to meet
your specific requirements.
For free evaluation samples, contact Coilcraft or visit www.
coilcraft.com.
Output Primary Leakage
Pri/sec
Part
Output
Output current inductance2 inductance3
DCR max
isolation
number1
power (W)
voltage (V)
(A rms)
min (µH)
max (µH)
(mOhms)
(Vdc)
DA2025-AL_
100
3.3
30.0
120.0
0.25
50(pri)
1500
2
(sec)
250
(aux)
1. When ordering, please specify packaging code:
2. Inductance measured on an Agilent/HP 4284 between pins 2 and 4 at
200 kHz, 0.1 Vrms, 0 Adc.
3. Leakage inductance measured between pins 2 and 4 at 200 kHz,
0.1 Vrms, 0 Adc with secondary pins shorted.
4. Ambient temperature range: –40°C to +85°C.
5. Electrical specifications at 25°C.
DA2025-ALD
Packaging:D =13″ machine ready reel. EIA-481 embossed plastic
tape (200 parts per full reel).
B
=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
0.920
max
23,37
2
Ø
1
2
0.810 max
3
20,57
4
5
0.080
2,03
10
9
8
0.800
20,32
10
1
0.190
4,83
7
2
8
0.095
2,41
6
Pri
8T
0.250
6,35
Recommended
Land Pattern
Ø
8
1
6
5
2T
4
Aux 5T
4
6
0.110
2,79
5
Sec
2T
10
0.360 max
9,14
0.006 /0,15
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Weight:
12.5 g
Terminations: Matte tin over nickel over brass
Tape and reel:200/13″ reel 44 mm tape width
Document 488 Revised 10/20/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.