Document 564 Mid-Span PoE Plus Magnetics This device contains two injector coils designed for 30 Watt PoE applications. Return loss exceeds the requirements of 802.3af specification for the entire frequency range. It maintains OCL of 350 µH up to 20 mA at +85°C ambient. Part number1 InductanceLeakage min2 inductance3 (µH) max (µH) FA2536-AL_675.0 DCR4 (Ohms) 0.55 Inductance vs Current 1200 1100 1000 900 Inductance (µH) Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. 0.240 For 2-Line Systems 800 700 600 85°C 500 1. When ordering, please specify packaging code: 400 FA2536-ALD Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance measured between pins 1 – 3 and between pins 4 – 6 at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer. 3.Leakage inductance is measured between pins 2 and 3 with pins 1 and 3 shorted and between pins 5 and 6 with pins 4 and 6 shorted. 4. DCR is measured between pins 1 – 3 and between pins 4 – 6. 5. Operating temperature range −40°C to +85°C. 6. Electrical specifications at 25°C. 300 70°C 25°C 200 100 0 5 10 15 20 25 30 35 Current (mA) Return Loss 0 5 1 Return Loss (dB) 10 6 FA2536-AL 2 5 3 4 0.525 max 13,34 25 35 0.410 max 10,41 40 0.004 /0,10 0.070 1,78 0.020 0,51 1 10 100 0.100 2,54 802.3af specification: 18 dB min from 1 MHz to 40 MHz 16 dB min at 50 MHz 12 dB min at 80 MHz 10 dB min at 100 MHz 0.100 2,54 0.100 2,54 Recommended Land Pattern 0.040 1,02 1000 Frequency (MHz) 0.375 max 0.052 9,53 1,32 1 20 30 0.470 11,94 0.330 8,38 15 Weight: 1.56 g Terminations: Tin-silver-copper over tin over nickel over phos bronze Tape and reel: 400/13″ reel 24 mm tape width US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 1 6 2 5 3 4 Document 564 Revised 12/06/06 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.