DW3316

Document 232
DW3316 Coupled Inductors for xDSL
• Coupled inductor optimized for xDSL filtering applications
• Can be used as a common mode choke, 1:1 transformer or
in SEPIC applications
Core material Ferrite
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight 1.13 – 1.34 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750 per 13″ reel Plastic tape: 24 mm wide,
0.36 mm thick, 16 mm pocket spacing, 5.5 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2DCR SRF3
Isat4
±20%max typ
Part number1
(mH) (Ohms) (MHz) (mA)
DW3316-155ML_
1.5
10.8
1.70 300
DW3316-275ML_
2.7
18.0
1.25 230
DW3316-335ML_
3.3
20.0
1.10 180
DW3316-395ML_
3.9
23.0
0.968 160
DW3316-475ML_
4.7
26.0
0.850 160
DW3316-685ML_
6.8
42.0
0.690 150
Color
dot
2
-123
1
1
4
2
3
4
0.100 0.290 0.400 max
2,54 7,37 10,16
3
Schematic
1. When ordering, please specify termination and packaging codes:
DW3316-685MLD
Termination:L = Gold over nickel over phos bronze terminations
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:D
=13″ machine-ready reel. EIA-481 embossed plastic
tape (750 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
2. Inductance is per winding, tested at 10 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4263B LCR meter or equivalent.
3. SRF is measured using an Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops 10% (typ) from its value without current.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.515
max
13,08
0.395
10,03
0.330
dia
8,38
0.185
4,70
0.200 max
5,08
0.100
2,54
0.490
12,45
Dimensions are in
0.115
2,92
0.110
2,79
Recommended
Land Pattern
inches
mm
Document 232 Revised 02/25/15