Document 205-1 Backlight Inductors – DS1608B Series • Specially designed for demanding backlighting applications • High breakdown voltage and very low DCR Designer’s Kit C334 contains 3 of each value Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant electroplated gold (<50 µin) over nickel over moly-manganese. Other terminations available at additional cost. Weight 0.14 – 0.16 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +115°C with derated current Storage temperature Component: –40°C to +115°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. L DCR InsulationSRF ±20%2 maxcore-windingtyp Irms3 1 Part number (mH)(Ohms) (MOhms) (MHz)(mA) DS1608B-104ML_0.10 0.95 >10 12 220 DS1608B-154ML_0.15 1.4 >10 10 200 DS1608B-224ML_0.22 1.7 >10 8 180 DS1608B-334ML_0.33 2.2 >10 6 160 DS1608B-474ML_0.47 3.8 >10 5 140 DS1608B-684ML_0.68 4.9 >10 4 120 DS1608B-105ML_1.0 9 >10 2 100 DS1608B-155ML_1.5 11 >10 1 80 DS1608B-225ML_2.2 19 >10 1 50 DS1608B-335ML_3.3 24 >10 1 40 DS1608B-475ML_4.7 30 >10 1 30 DS1608B-685ML_6.8 56 >10 0.9 20 DS1608B-106ML_10.0 74 >10 0.8 10 1. When ordering, please specify termination and packaging codes: DS1608B-106MLC Termination: L =RoHS compliant gold over nickel over moly-manganese Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape (2500 parts per full reel). 2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. Current that causes a 30°C temperature rise from 25°C ambient. 4. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 205-1 Revised 10/06/08 Document 205-2 Backlight Inductors – DS1608B Series Typical Inductance vs. Current Dimensions are in inches mm Irms Derating 120 110 90 80 70 60 50 40 25°C Percent of rated Irms 100 30 20 10 0 -40 -20 0 20 40 60 80 100 120 Ambient temperature (°C) Document 205-2 Revised 10/06/08