Document 142-1 Common Mode Line Chokes High Inductance Series These common mode line chokes provide the best available combination of low cost and high inductance. Coilcraft EE style common mode line chokes are available in two series, each with a variety of current ratings, sizes and inductance values. • Cost effective design • 3750 Vrms, one minute isolation between windings Coilcraft Designer’s Kit No. P402 contains samples of eight standard EE and toroidal common mode line chokes. To order, contact Coilcraft or purchase on-line at http://order.coilcraft.com. F55xx Series 0.600 ±0.010 15,24 ±0,25 2 1.2 max 30,5 5 1.35 max 34,29 0.875 ±0.015 22,23 ±0,38 2 5 11 8 2 5 11 8 +0.002 0.150 ±0.03 3,81 ±0,76 0.031 –0.001 dia 0,79 +0,0508 –0,0254 11 8 1.45 max 36,8 Terminations: Tin-silver over tin over copper H70xx Series 0.900 ±0.010 22,86 ±0,25 2 1.3 max 33,0 0.150 ±0.03 3,81 ±0,76 5 1.65 max 41,9 0.053 ±0.002 1,35 ±0,05 dia 1.00 ±0.015 25,4 ±0,38 11 8 1.80 max 45,7 Terminations: Tin-silver over tin over copper US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 142-1 Revised 02/14/06 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 142-2 Common Mode Line Chokes–High Inductance Series F55xx Series Part number Inductance1 (mH) CurrentSRF2 (Amps) (kHz) F5585-AL 82.0 ¹/4 F5586-AL 34.0 ³/4 F5587-AL25.3 1 F5588-AL15.8 1¹/4 F5589-AL8.20 1¹/2 F5590-AL6.55 2 F5591-AL3.45 2¹/2 F5592-AL1.75 3 F5593-AL1.20 4 DCR3 (Ohms) 653.1 1001.30 129 0.855 1700.540 2060.295 230 0.215 3090.120 420 0.070 560 0.045 1. Inductance is minimum per winding, tested at 0.1 Vrms, 20 kHz. 2. SRF is minimum for each winding. 3. DCR is maximum per winding. 4. Ambient temperature range –40°C to +85°C. 5. Electrical specifications at 25°C. 6. Parts in bold type are included in Coilcraft Designer’s Kit No. P402. H70xx Series Part number Inductance1 (mH) CurrentSRF2 (Amps) (kHz) H7010-AL56.5 1 H7011-AL34.8 1¹/4 H7012-AL23.6 1¹/2 H7013-AL19.8 2 H7014-AL7.38 2¹/2 H7015-AL5.36 3 H7016-AL4.10 4 H7017-AL2.09 5 H7018-AL0.966 6 H7019-AL0.753 8 DCR3 (Ohms) 62 1.10 960.720 1040.465 128 0.350 1900.160 220 0.115 275 0.080 370 0.045 556 0.025 640 0.017 1. Inductance is minimum per winding, tested at 0.1 Vrms, 20 kHz. 2. SRF is minimum for each winding. 3. DCR is maximum per winding. 4. Ambient temperature range –40°C to +85°C. 5. Electrical specifications at 25°C. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 142-2 Revised 02/14/06 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.