MSS1583

Document 1111-1
Shielded Power Inductors – MSS1583
• 14.8 × 14.8 mm footprint; 8.6 mm high shielded inductors
• 16 inductance values from 10 µH to 1 mH
• Low DCR and excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environment RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight: 3.7 – 4.4 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick,
24 mm pocket spacing, 8.6 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (Ohms)3
Isat (A)5
Irms (A)6
Inductance2
SRF typ4
Part number1
(µH)
typ max
(MHz)
10% drop 20% drop 30% drop 20°C rise 40°C rise
MSS1583-103ME_
10
±20%
0.012
0.01417.0
12.013.614.75.0 7.4
MSS1583-123ME_
12
±20%
0.014
0.01714.5
11.713.314.24.4 6.3
MSS1583-153ME_
15
±20%
0.018
0.02113.5
10.111.512.44.3 6.1
MSS1583-183ME_
18
±20%
0.020
0.02312.0
9.210.511.23.9 5.5
MSS1583-223ME_
22±20%
0.023 0.026
10.5
8.2
9.1
10.4
3.7
5.3
MSS1583-333ME_
33
±20%
0.033
0.0388.5
7.07.98.63.44.8
MSS1583-473ME_
47
±20%
0.048
0.0557.3
5.96.77.32.73.7
MSS1583-683ME_
68
±20%
0.061
0.0706.0
4.75.56.02.53.4
MSS1583-104KE_
100
±10%
0.090
0.1034.8
3.94.44.82.02.8
MSS1583-154KE_
150
±10%
0.138
0.1593.7
3.13.63.91.55
2.20
MSS1583-224KE_
220
±10%
0.205
0.2353.0
2.63.03.31.30
1.80
MSS1583-334KE_
330
±10%
0.300
0.3452.7
2.02.32.51.00
1.45
MSS1583-474KE_
470
±10%
0.386
0.4452.2
1.82.02.20.96
1.35
MSS1583-684KE_
680
±10%
0.570
0.6551.8
1.41.61.80.78
1.10
MSS1583-824KE_
820
±10%
0.640
0.7361.6
1.31.51.60.74
1.0
MSS1583-105KE_
1000
±10%
0.860
0.9901.5
1.11.31.40.63
0.86
1.Specify termination and packaging codes:
MSS1583-105KED
Termination:E=RoHS compliant matte tin over nickel over phos
bronze.
Special order:
Q = RoHS tin-silver-copper (95.5/4/0.5) or
P = non-RoHS tin-lead (63/37).
Packaging:D
=13″ machine-ready reel. EIA-481 embossed plastic
tape (300 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4263B LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test
fixture.
4. SRF measured using Agilent/HP 4191A or equivalent.
5. DC current at 25°C that causes the specified drop in inductance from
its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1111-1 Revised 07/10/15
Document 1111-2
Shielded Power Inductors – MSS1583
Typical L vs Current
Typical L vs Frequency
10,000
10,000
220 µH
100
100 µH
22 µH
10
1
10
1
220 µH
100 µH
100
22 µH
10 µH
10
10 µH
0.1
1000 µH
1000
1000 µH
Inductance (µH)
Inductance (µH)
1000
100
Current (A)
1
0.1
1
10
100
Frequency (MHz)
0.590 ±0.020
15,0 ±0,5
0.590 ±0.020
15,0 ±0,5
123
Dash number
X
Internal code
0.030
typ
0,76
0.339 max
8,6
0.130
3,3
0.236
6,0
0.220
5,6
0.323
8,2
inches
Dimensions are in
mm
0.150
3,8
0.453
11,5
Recommended
Land Pattern
Document 1111-2 Revised 07/10/15