POE60C/D

Document 402-1
Miniature Flyback Transformers for PoE
• Space efficient size: 16.5 mm square less than 7.5 mm tall
• Operates at 250 kHz with 36 – 72 Volts input
• 1500 Vrms, one minute isolation between primary and secondary
Designer’s Kit C382 contains two samples of each part.
Core material Ferrite
Terminations RoHS tin-silver over tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight 2.6 – 2.9 g
Ambient temperature –40°C to +125°C
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 400 per 13″ reel Plastic tape: 32 mm wide, 0.4 mm thick,
20 mm pocket spacing, 7.69 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
InductanceInductance
Leakage
DCR max (Ohms)4 at Ipk3
Part Power at 0 A2
inductance5 Turns ratio6 Ipk3
number1
(W) ±10% (µH) min (µH)
pri
sec bias max (µH) pri/sec pri/bias (A)
Continuous
POE60C-18L_ 6
POE60C-25L_ 6
POE60C-33L_ 6
POE60C-50L_ 6
POE60C-12L_ 6
Discontinuous mode
POE60D-18L_ 6
POE60D-25L_ 6
POE60D-33L_ 6
POE60D-50L_ 6
POE60D-12L_ 6
Output7
mode8
167.0
177.0
184.0
193.0
204.0
150.3
159.3
165.6
173.7
183.6
0.3030.0170.570
0.3530.0270.660
0.2860.0260.515
0.3440.0430.660
0.2930.0830.545
7.8
7.0
4.0
8.0
5.8
1 : 0.0631 : 0.344
1 : 0.0831 : 0.333
1 : 0.1001 : 0.333
1 : 0.1431 : 0.343
1 : 0.3331 : 0.333
0.62
0.60
0.57
0.55
0.52
1.8 V, 3.3 A
2.5 V, 2.4 A
3.3 V, 1.8 A
5.0 V, 1.2 A
12.0 V, 0.5 A
75.0
80.0
85.0
90.0
95.0
67.5
72.0
76.5
81.0
85.5
0.3110.0180.575
0.2190.0180.388
0.2850.0260.530
0.2710.0330.529
0.2650.0740.484
6.7
5.0
4.0
3.1
2.4
1 : 0.0631 : 0.344
1 : 0.0831 : 0.333
1 : 0.1001 : 0.333
1 : 0.1431 : 0.357
1 : 0.3331 : 0.333
1.0
0.95
0.90
0.85
0.80
1.8 V, 3.3 A
2.5 V, 2.4 A
3.3 V, 1.8 A
5.0 V, 1.2 A
12.0 V, 0.5 A
1. When ordering, please specify packaging code:
POE60D-12LD
Packaging:D
=13″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer
added ($25 charge), use code letter D instead.
2. Inductance is for the primary, measured at 250 kHz, 0.5 Vrms.
3. Peak primary current drawn at minimum input voltage.
4. DCR for the primary and for the secondary are with the windings connected in parallel.
5. Leakage inductance is for the primary winding with the secondary winding shorted.
6. Turns ratios are with the primary and secondary windings connected in parallel.
7. Output of the secondary is with the windings connected in parallel. Bias winding output is 12 V, 20 mA.
8. Designed to remain in continuous mode operation at power levels of 3 Watts and above.
9. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
5
4
9
8
Primary
Secondary
2
3
10
11
1
Bias
6
Primary windings and secondary windings
to be connected in parallel on PC board.
Document 402-1 Revised 12/09/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 402-2
Miniature Flyback Transformers for PoE
Dot indicates pin 1
1
POE-60D-XX
0.642 max
16,30
12
6
0.028
0,70
7
0.098
2,50
0.291 max
7,40
0.004 / 0,10
0.575
14,60
0.661 max
16,80
Recommended
Land Pattern
0.709
18,0
0.472
12,00
6
0.512
13,0
7
1
12
0.098
2,50
12
1
Dimensions are in
0.069
1,75
6
7
0.098
2,50
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 402-2 Revised 12/09/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.