UNISONIC TECHNOLOGIES CO., LTD U74AHCT1G32 CMOS IC SINGLE 2-INPUT POSITIVE-OR GATE DESCRIPTION The UTC U74AHCT1G32 is a single 2-input positive-or gate, which provides the function Y=A+B in positive logic. FEATURES * Inputs are TTL voltage compatible * Operate from 4.5V to 5.5V * Max tPD of 8ns @ 5 V * Low power dissipation: ICC=10μA(Max) @ TA=25°C ORDERING INFORMATION Ordering Number U74AHCT1G32G-AF5-R U74AHCT1G32G-AL5-R Package SOT-25 SOT-353 Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 4 QW-R502-295.C U74AHCT1G32 PIN CONFIGURATION FUNCTION TABLE INPUT(A) INPUT(B) H X X H L L Note: H: high voltage level; L: low voltage level. CMOS IC OUTPUT(Y) H H L LOGIC DIAGRAM Logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R502-295.C U74AHCT1G32 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5 ~ 7 V Input Voltage VIN -0.5 ~ 7 V Output Voltage VOUT -0.5 ~ VCC +0.5 V VCC or GND Current ICC ±50 mA Output Current IOUT ±25 mA Input Clamp Current IIK -20 mA Output Clamp Current IOK ±20 mA Operating Temperature TOPR -40 ~ +85 °С Storage Temperature TSTG -65 ~ +150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage High-level Input Voltage Low-level Input Voltage High-level Output Current Low-level Output Current Input Transition Rise or Fall Rate SYMBOL VCC VIN VOUT VIH VIL IOH IOL tR, tF SYMBOL High-Level Output Voltage VOH Low-Level Output Voltage VOL Input Leakage Current Quiescent Supply Current II(LEAK) IQ Additional Quiescent Supply Current IQ Input Capacitance CI TYP MAX 5.5 5.5 VCC 0.8 -8 8 20 UNIT V V V V V mA mA ns/V TEST CONDITIONS VCC=4.5V, IOH=-50μA VCC=4.5V, IOH=-8mA VCC=4.5V, IOH=50μA VCC=4.5V, IOH=8mA VCC=0~5.5V, VIN=5.5V or GND VCC=5.5V, VIN=VCC or GND, IOUT=0 VCC=5.5V, One input at 3.4V, Other inputs at VCC or GND VCC=4.5V, VIN=VCC or GND MIN 4.4 3.94 TYP 4.5 MAX UNIT V 0.1 0.36 ±0.1 μA 1 μA 1.35 mA 2 10 pF TYP 5 5 5.5 5.5 MAX 6.9 6.9 7.9 7.9 UNIT TYP 11.5 MAX UNIT pF V DYNAMIC CHARACTERISTICS PARAMETER Propagation Delay Time Input(A or B) to Output(Y) MIN 4.5 0 0 2 ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITIONS SYMBOL TEST CONDITIONS tPLH VCC=5V±0.5V, CL=15pF tPHL tPLH VCC=5V±0.5V, CL=50pF tPHL MIN ns OPERATING CHARACTERISTICS (TA=25°С, unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS CPD VCC=5V, f=1MHz, No load UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 3 of 4 QW-R502-295.C U74AHCT1G32 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. PRR≦1MHz, ZO=50Ω, tR≦3ns, tF≦3ns UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R502-295.C