UNISONIC TECHNOLOGIES CO., LTD U74AHC1G04 CMOS IC SINGLE INVERTER GATE DESCRIPTION The U74AHC1G04 is a inverter gate, it provides the Function Y=A FEATURES * Operation Voltage Range: 2V~5.5V * Low Power Current: ICC=10μA(Max) * High Speed: tPD=6.5ns(Typ) ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74AHC1G04L-AF5-R U74AHC1G04G-AF5-R U74AHC1G04L-AL5-R U74AHC1G04G-AL5-R Package Packing SOT-25 SOT-353 Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-298.C U74AHC1G04 PIN CONFIGURATION FUNCTION TABLE INPUT(A) H L Note: H: high voltage level; L: low voltage level. CMOS IC OUTPUT(Y) L H LOGIC DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-298.C U74AHC1G04 CMOS IC ABSOLUTE MAXIMUM RATING (unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~+7.0 V Input Voltage (Note 2) VIN -0.5~+7.0 V Output Voltage (Note 2) VOUT -0.5~VCC+0.5 V VCC or GND Current ICC ±50 mA Output Current IOUT ±25 mA Input Clamp Current IIK -20 mA Output Clamp Current IOK ±20 mA Operating Temperature TOPR -40 ~ +85 ℃ Storage Temperature TSTG -65 ~ +150 ℃ Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. THERMAL DATA PARAMETER Junction to Ambient SYMBOL SOT-25 SOT-353 θJA RATINGS 200 250 UNIT °C/W RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage SYMBOL VCC VIN VOUT High-Level Input Voltage VIH Low-Level Input Voltage VIL High-Level Output Current IOH Low-Level Output Current IOL Input Transition Rise or Fall Rate tR, tF TEST CONDITIONS VCC=2.0V VCC=3.0V VCC=5.5V VCC=2.0V VCC=3.0V VCC=5.5V VCC=2.0V VCC=3.3V±0.3V VCC=5.0V±0.5V VCC=2.0V VCC=3.3V±0.3V VCC=5.0V±0.5V VCC=3.3V±0.3V VCC=5.0V±0.5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 2 0 0 1.5 2.1 3.85 TYP MAX 5.5 5.5 VCC UNIT V V V V 0.5 0.9 1.65 -50 -4 -8 50 4 8 100 20 V μA mA μA mA ns/V 3 of 5 QW-R502-298.C U74AHC1G04 CMOS IC ELECTRICAL CHARACTERISTICS PARAMETER High-Level Output Voltage Low-Level Output Voltage Input Leakage Current SYMBOL VOH VOL II(LEAK) Quiescent Supply Current IQ Input Capacitance CI TYP 2.0 3.0 4.5 MAX UNIT V 0.1 0.1 0.1 0.36 0.36 ±0.1 μA 1 μA 2 10 pF TYP 5 5 7.5 7.5 3.8 3.8 5.3 5.3 MAX 7.1 7.1 10.6 10.6 5.5 5.5 7.5 7.5 UNIT TYP 12 MAX UNIT pF V DYNAMIC CHARACTERISTICS PARAMETER Propagation Delay Time Input(A) to Output(Y) Propagation Delay Time Input(A) to Output(Y) TEST CONDITIONS MIN VCC=2.0V, IOH=-50μA 1.9 VCC=3.0V, IOH=-50μA 2.9 VCC=4.5V, IOH=-50μA 4.4 VCC=3.0V, IOH=-4mA 2.58 VCC=4.5V, IOH=-8mA 3.94 VCC=2.0V, IOH=50μA VCC=3.0V, IOH=50μA VCC=4.5V, IOH=50μA VCC=3.0V, IOH=4mA VCC=4.5V, IOH=8mA VCC=0V~5.5V, VIN=5.5V or GND VCC=5.5V, VIN=VCC or GND, IOUT=0A VIN=VCC or GND SYMBOL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL TEST CONDITIONS MIN VCC=3.3V±0.3V, CL=15pF VCC=3.3V±0.3V, CL=50pF VCC=5V±0.5V, CL=15pF VCC=5V±0.5V, CL=50pF ns ns OPERATING CHARACTERISTICS (TA=25℃) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS CPD No load, VCC=5V, f=1MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 4 of 5 QW-R502-298.C U74AHC1G04 CMOS IC TEST CIRCUIT AND WAVEFORMS VCC Timing Input tW 50% tSU Data Input 0V th 50% VCC VIN 50% 50% 50% 0V VCC PULSE WIDTH 0V SETUP TIME AND HOLD TIME VCC VIN VIN 50% tPLH VOUT 0V tPHL 50% 50% tPZL VCC 50% 50% VCC VOUT 50% VOH VOUT VOL +0.3V tPHZ tPZH 50% 0V tPLZ 50% V VOH -0.3V OH VOL PROPAGATION DELAY TIMES VOL 0V ENABLE AND DISABLE TIMES Note: CL includes probe and jig capacitance. PRR≦1MHz, ZO=50Ω, tR≦3ns, tF≦3ns UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-298.C