UNISONIC TECHNOLOGIES CO., LTD PUMT1 PNP SILICON TRANSISTOR PNP GENERAL PURPOSE DUAL TRANSISTOR DESCRIPTION Two independently operating PNP transistors. FEATURES * Low Current (Max. -100mA) * Low Voltage (Max. -40V) * Reduces Number of Components and Board Space. * Complement to PUMX1. APPLICATIONS *General Purpose Switching and Amplification. EQUIVALENT CIRCUIT 5 6 4 TR2 TR1 1 3 2 ORDERING INFORMATION Ordering Number Lead Free Halogen Free PUMT1L-AL6-R PUMT1G-AL6-R Package SOT-363 1 E1 Pin Assignment 2 3 4 5 B1 C2 E2 B2 6 C1 Packing Tape Reel MARKING 6 5 4 MT1 1 2 L:Lead Free G:Halogen Free 3 www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd 1 of 3 QW-R218-001.E PUMT1 PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C) PARAMETER SYMBOL RATING UNIT Collector-Base Voltage VCBO -50 V Collector-Emitter Voltage VCEO -40 V Emitter-Base Voltage VEBO -5 V Collector Current (DC) IC -100 mA Peak Collector Current ICM -200 mA Peak Base Current IBM -200 mA Collector Power Dissipation PC 200 mW Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C) PARAMETER SYMBOL CONDITION IE=0, VCB=-30V Collector Cut-Off Current ICBO IE=0, VCB=-30V, TJ=150°C Emitter Cut-Off Current IEBO VEB=-4V, IC=0 DC Current Gain hFE IC=-1mA, VCE=-6V Collector-Emitter Saturation Voltage VCE(SAT) IC=-50mA, IB=-5mA (Note 1) Collector Capacitance Cc IE=IE=0, VCB=-12V, f=1MHz Transition Frequency fT IC=-2mA, VCE=-12V, f=100MHz Note: 1. Pulse test: Pulse Width≤300μs, Duty Cycle≤2.0% 2. The following characteristics apply to both TR1 and TR2. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX -100 -10 -100 UNIT nA μA nA -200 2.2 mV pF MHz 120 100 2 of 3 QW-R218-001.E PUMT1 PNP SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R218-001.E