UNISONIC TECHNOLOGIES CO., LTD U74AHC1G14 CMOS IC SINGLE SCHMITT-TRIGGER INVERTER GATE DESCRIPTION The U74AHC1G14 contains one inverter with Schmitt-trigger, which provides the Function Y= A . They provide an inverting buffer function with Schmitt trigger action. These devices are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. FEATURES * Operation Voltage Range: 2V ~ 5.5V * Low power consumption, ICC = 1μA (Max) at 5.5V * ±8mA output driver at 5V ORDERING INFORMATION Ordering Number U74AHC1G14G-AE5-R U74AHC1G14G-AF5-R U74AHC1G14G-AL5-R Package SOT-23-5 SOT-25 SOT-353 Packing Tape Reel Tape Reel Tape Reel MARKING 5 4 A14G 1 2 3 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-300.F U74AHC1G14 CMOS IC PIN CONFIGURATION VCC 5 1 NC 2 A 3 GND FUNCTION TABLE INPUT(A) L H H: high voltage level L: low voltage level Y 4 OUTPUT(Y) H L LOGIC DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-300.F U74AHC1G14 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5 ~ 7 V Input Voltage VIN -0.5 ~ 7 V Output Voltage VOUT -0.5 ~ VCC +0.5 V VCC or GND Current ICC ±50 mA Output Current IOUT ±25 mA Input Clamp Current IIK -20 mA Output Clamp Current IOK ±20 mA Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING COMDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Input Transition Rise or Fall Rate Operating Temperature SYMBOL VCC VIN VOUT t/v TA CONDITIONS High or low state VCC=5.0+0.5V MIN 2 0 0 TYP MAX 5.5 5.5 VCC 20 125 UNIT V V V ns/V °С TYP MAX 2.2 3.15 3.85 1.90 2.75 3.35 1.2 1.4 1.6 0.1 0.1 0.1 0.36 0.36 UNIT V V V V V V V V V V V V V V V V V V V ±0.1 μA 1 μA 10 pF -40 ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL Positive-Going Threshold VT+ Negative-Going Threshold VT- Negative-Going Threshold ∆VT High-Level Output Voltage Low-Level Output Voltage Input Leakage Current VOH VOL II(LEAK) Quiescent Supply Current IQ Input Capacitance CI TEST CONDITIONS VCC=3.0V VCC=4.5V VCC=5.5V VCC=3.0V VCC=4.5V VCC=5.5V VCC=3.0V VCC=4.5V VCC=5.5V VCC=2.0V IOH=-50μA VCC=3.0V VCC=4.5V VCC=3.0V, IOH=-4mA VCC=4.5V, IOH=-8mA VCC=2.0V IOH=50μA VCC=3.0V VCC=4.5V VCC=3.0V, IOH=4mA VCC=4.5V, IOH=8mA VCC=0~5.5V, VIN=5.5V or GND VCC=5.5V, VIN=VCC or GND, IOUT=0A VCC=5.0V, VIN=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.2 1.75 2.15 0.90 1.35 1.65 0.3 0.4 0.5 1.9 2.9 4.4 2.58 3.94 2 3 4.5 2 3 of 5 QW-R502-300.F U74AHC1G14 CMOS IC DYNAMIC CHARACTERISTICS PARAMETER SYMBOL tPLH Propagation Delay Time Input(A) to Output(Y) tPHL tPLH tPHL TEST CONDITIONS VCC=3.3V±0.3V VCC=5V±0.5V CL=15pF VCC=3.3V±0.3V VCC=5V±0.5V VCC=3.3V±0.3V VCC=5V±0.5V CL=50pF VCC=3.3V±0.3V VCC=5V±0.5V MIN TYP 8.3 5.5 8.3 5.5 10.8 7 10.8 7 MAX 12.8 8.6 12.8 8.6 16.3 10.6 16.3 10.6 UNIT ns ns ns ns ns ns ns ns TYP 9 MAX UNIT pF OPERATING CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS CPD VCC=5V, f=1MHz, No load UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 4 of 5 QW-R502-300.F U74AHC1G14 CMOS IC TEST CIRCUIT AND WAVEFORMS From Output CL Notes: 1. CL includes probe and jig capacitance. 2. PRR ≤ 1MHz, ZO = 50Ω, tR ≤ 3ns, tF ≤ 3ns. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-300.F