I N D U C T O R S April 2016 Inductors for Power Circuits Wound Ferrite CLF-NI-D Series CLF7045NI-D Type CLF7045NI-D (2/9) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. Do not use products that have received any excessive mechanical shock such as by being dropped. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Do not expose the products to magnets or magnetic fields. The performance of the product may deteriorate if coating materials are used, thus please assess the situation beforehand by taking this factor into consideration. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm (3/9) I N D U C T O R S Inductors for Power Circuits Product compatible with RoHS directive Halogen-free Compatible with lead-free solder AEC-Q200 Wound Ferrite Overview of CLF7045NI-D Type FEATURES Magnetic shield type wound inductor for power circuits. It can be used at a wide temperature range. –55∼+150°C（Including self-temperature rise) 1 to 470μH, wide E-6 Series lineup allows for various usages. APPLICATION Equipment used for automobiles (ECM, airbags, headlights, electronic power steering, meters, ABS, other) PART NUMBER CONSTRUCTION CLF7045NI T Series name Packaging style T Taping - 1R0 N Inductance (μH) 1R0 1.0 100 10 101 100 Inductance tolerance M ±20% N ±30% - D Internal code OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Package quantity Operating Storage Type temperature temperature (pieces/reel) （°C） （°C） CLF7045NI-D –55 to +150 –55 to +150 1000 Operating temperature range includes self-temperature rise. The Storage temperature range is for after the circuit board is mounted. Individual weight （g） 0.8 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm (4/9) I N D U C T O R S CLF7045NI-D Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 10 to 30s Peak Temp. T4 245°C Time t3 5s Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm (5/9) I N D U C T O R S CLF7045NI-D Type SHAPE & DIMENSIONS 2.0±0.1 7.0±0.2 7.4±0.2 (3.4) 4.5±0.3 2.0±0.1 (0.15) 2.0±0.1 Dimensions in mm 2.2 recommended land pattern 2.4 3.3 2.4 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm (6/9) I N D U C T O R S CLF7045NI-D Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 Tolerance ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Measuring frequency DC resistance Rated current (kHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Isat (A) 8.5 6.3 6.2 4.7 4.1 3.1 3.0 2.3 1.7 1.6 1.26 1.08 0.81 0.69 0.56 0.50 0.41 ( ) 0.009±30% 0.010±30% 0.013±30% 0.016±30% 0.018±30% 0.022±30% 0.033±20% 0.055±20% 0.069±20% 0.097±20% 0.130±20% 0.170±20% 0.260±20% 0.430±20% 0.550±20% 0.800±20% 1.200±20% Part No. Itemp (A) 6.5 5.4 5.1 4.8 4.1 3.9 3.1 2.6 2.2 1.8 1.7 1.5 1.05 0.95 0.75 0.58 0.46 CLF7045NIT-1R0N-D CLF7045NIT-1R5N-D CLF7045NIT-2R2N-D CLF7045NIT-3R3N-D CLF7045NIT-4R7N-D CLF7045NIT-6R8N-D CLF7045NIT-100M-D CLF7045NIT-150M-D CLF7045NIT-220M-D CLF7045NIT-330M-D CLF7045NIT-470M-D CLF7045NIT-680M-D CLF7045NIT-101M-D CLF7045NIT-151M-D CLF7045NIT-221M-D CLF7045NIT-331M-D CLF7045NIT-471M-D Rated current: smaller value of either Isat or Itemp. Isat: When based on the inductance change rate (30% below the nominal value) Itemp: When based on the temperature increase (Temperature increase of 40°C by self heating) ○ Measurement equipment Measurement item Product No. L 4285A DC resistance AN-114N Rated current Isat 4285A+42841A+42842C ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies ADEX Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm (7/9) I N D U C T O R S CLF7045NI-D Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 10000 1000 471 331 Inductance(μH) 221 151 101 100 680 470 330 220 150 100 10 6R8 4R7 3R3 2R2 1R5 1R0 1 1 10 100 1000 10000 100000 Frequency(kHz) ○ Measurement equipment Product No. Manufacturer 4285A+42841A+42842C Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm (8/9) I N D U C T O R S CLF7045NI-D Type ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 1000 471 331 221 151 100 101 680 470 330 Inductance(μH) 220 150 10 100 6R8 4R7 3R3 2R2 1R5 1R0 1 0.1 0 1 2 3 4 5 6 7 8 DC current(A) 9 10 11 12 13 14 15 ○ Measurement equipment Product No. Manufacturer 4285A+42841A+42842C Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm (9/9) I N D U C T O R S CLF7045NI-D Type PACKAGING STYLE REEL DIMENSIONS 2.0±0.5 E Type CLF7045NI-D A ø330 W1 16.4 W2 22.4 N ø100 E 2 N * These values are typical values. (1.0) ø13.0±0.5 W1 ø21.0±0.8 W2 A Dimensions in mm TAPE DIMENSIONS P2 P0 K2 P1 t A Type CLF7045NI-D A 7.8 B 7.4 B W F E øD0 øD0 1.5+0.1/-0 E 1.75±0.1 F 7.5±0.1 Dimensions in mm P0 P1 P2 W 4.0±0.1 12.0±0.1 2.0±0.1 16.0±0.3 K2 5.4 t 0.4 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160411 / inductor_automotive_power_clf7045ni-d_en.fm