E M C C o m p o n e n t s May 2016 Noise suppression filter for audio lines For cellular bands MAF Series MAF1608G MAF1608G 1608[0603 inch]* * Dimensions Code JIS[EIA] Type (2/8) E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months.Be sure to follow the storage conditions (Temperature:5 to 40°C, Humidity:10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the inductors to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20160511 / audioline-filter_maf1608g_en.fm (3/8) E M C C o m p o n e n t s Noise suppression filter for audio lines For cellular bands Product compatible with RoHS directive halogen-free Compatible with lead-free solders Overview of MAF1608G Type FEATURES A compact noise suppression component for audio lines that accommodates high currents. Distortions are greatly reduced during insertion with the adoption of newly-developed low distortion ferrite materials. Small reductions in volume due to its low resistance, and optimal for devices that require high sound quality as the generating of sound distortions is controlled. Shows excellent effects in measures against the deterioration of the receiving sensitivity of wireless devices due to high attenuation characteristics in the cellular band. APPLICATIONS Sound lines for devices such as smartphones and tablets (earphones, microphones, and speakers). Sound lines for portable game machines. PART NUMBER CONSTRUCTION MAF Series name 1608 L×W×T Dimensions (mm) 1608 1.6×0.8x0.8 G AD 471 C T 000 characteristics Internal code Impedance (:) at 900MHz 471 470 Internal code Packaging style Internal code G GSM Band OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature ranges Operating Storage Type temperature temperature （°C） （°C） MAF1608G –55 to +125 –55 to +125 The Storage temperature range is for after the assembly. Package quantity Individual weight (pieces/reel) （mg） 4,000 4 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160511 / audioline-filter_maf1608g_en.fm (4/8) E M C C o m p o n e n t s MAF1608G Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 30 to 60s Peak Temp. T4 250 to 260°C Time t3 10s Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160511 / audioline-filter_maf1608g_en.fm (5/8) E M C C o m p o n e n t s MAF1608G Type SHAPE & DIMENSIONS 0.8±0.15 0.8±0.15 1.6±0.15 Dimensions in mm 0.3±0.2 0.8 RECOMMENDED LAND PATTERN 0.6 0.8 0.6 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160511 / audioline-filter_maf1608g_en.fm (6/8) E M C C o m p o n e n t s MAF1608G Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLES Impedance 100MHz) (:)Typ. 60 DC resistance [900MHz] (:)Typ. 470 (:)Min. 290 [1.7GHz] (:)Typ. 270 ○ Measurement equipment Measurement item Product No. Impedance E4991A+16192A DC resistance Type-7556 ＊ Equivalent measurement equipment may be used. (:)max. 0.075 (:)Typ. 0.06 Rated current Part No. (mA)max. 1600 MAF1608GAD471CT000 Manufacturer Keysight Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160511 / audioline-filter_maf1608g_en.fm (7/8) E M C C o m p o n e n t s MAF1608G Type ELECTRICAL CHARACTERISTICS Z, X, R VS. FREQUENCY CHARACTERISTICS 500 Z Impedance (Ω) 400 300 R 200 X 100 0 1 10 100 Frequency (MHz) 1000 INSERTION LOSS VS. FREQUENCY CHARACTERISTICS Insertion Loss(dB) 0 5 10 15 1 10 100 Frequency(MHz) 1000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160511 / audioline-filter_maf1608g_en.fm (8/8) E M C C o m p o n e n t s MAF1608G Type PACKAGING STYLE REEL DIMENSIONS ø60min. 2.0±0.5 1.0 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 14.4max. ø180±2.0 Dimensions in mm 4.0±0.1 B A 8.0±0.3 2.0±0.05 3.5±0.05 1.5 +0.1 0 1.75±0.1 TAPE DIMENSIONS P1 K Dimensions in mm Type MAF1608 160min. Drawing direction A 1.1±0.2 Taping B 1.9±0.2 P1 4.0±0.1 K 1.1max. 200min. 300min. Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20160511 / audioline-filter_maf1608g_en.fm