TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Name: SAW Filter 915 MHz SMD 3.0×3.0 mm (BW=26 MHz) TST Parts No.:TA1042B Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: David Chang Approved by: Bob Chau Date: 2015/08/10 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 915 MHz MODEL NO.: TA1042B REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 27dBm Continuous Wave (1500 hours) 2. DC voltage: 5 V RoHS Compliant Lead free Lead-free soldering 3. Operating Temperature: -40C to +85C 4. Storage Temperature: -40C to +85C B. ELECTRICAL CHARACTERISTICS: Item Center frequency Insertion loss (902 ~ 928 MHz) Amplitude ripple (902 ~ 928 MHz) VSWR (902 ~ 928 MHz) Attenuation (Reference level from 0 dB) D.C. ~ 800 MHz 800 ~ 880 MHz 960 ~ 1080 MHz 1080 ~ 1500 MHz 1500 ~ 3000 MHz Source impedance Load impedance Temperature Coefficient of Frequency Fc IL Zs ZL Unit Min. Typ. Max. MHz dB dB - - 915 2.2 0.6 1.6 3.5 2.0 2.3 dB dB dB dB dB ppm/℃ 50 40 32 45 22 - 63 48 39 65 28 50 50 -36 - Note. No matching network required for operation at 50 MEASUREMENT CIRCUIT: HP Network analyzer B SAW Filter E A,C,D,F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. Reflections Functions: S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. OUTLINE DRAWING: G Y B: Input E: Output A, C, D, F: Ground Unit: mm △：Year Code (2011->1, 2012->2, …, 2019->9, 2020->0) □：Date Code Date Code Table: . E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) 2. TAPE DIMENSION GY TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 H. Recommended Reflow Profile: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7