TA1707A _Rev.1.0_.pdf

TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Product Specifications Approval Sheet
Product Description: SAW Filter 1790.48 MHz SMD 3.0×3.0 mm (BW=46 MHz)
TST Part No.: TA1707A
Customer Part No.:
Customer signature required
Company:
Division:
Approved by :
Date:
Checked by:
David Chang
Approved by:
Bob Chau
Date:
2014/01/13
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the changes.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
FR-71S03-02
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
SAW Filter 1790.48 MHz
MODEL NO.: TA1707A
REV. NO.:1
A. MAXIMUM RATING:
1.Input Power Level: 10 dBm
2.DC voltage: 3 V
RoHS Compliant
Lead free
Lead-free soldering
3.Operating Temperature: -40C to 85C
4.Storage Temperature: -50C to +125C
B. CHARACTERISTICS:
Terminating source impedance (differential): Zs=150Ω // 10nH
Terminating load impedance (differential):
ZL=150Ω // 10nH
Item
Center frequency
Fc
Insertion loss (1767.48~1813.48 MHz) IL
Bandwidth at -2 dB
Amplitude ripple (1767.48~1813.48 MHz)
VSWR (1767.48~1813.48 MHz)
Group delay ripple (1767.48~1813.48 MHz)
CMDR (1767.48~1813.48 MHz)
Phase error (1767.48~1813.48 MHz) (3)
Attenuation (1)
50 ~ 1690 MHz
1910 ~ 2600
MHz
2600 ~ 4000
MHz
4000 ~ 6000
MHz
Temperature Coefficient of Frequency
Unit
Min.
Typ.
Max.
MHz
dB
MHz
dB
ns
dB
deg
46
22
-
1790.48
3.7
83
0.7
1.6
5
28
3
5
2
2
25
6
dB
dB
dB
dB
40
40
30
15
49
45
36
26
-
Ppm/℃
-
-36
-
Notes:
(1) The amplitude reference is insertion loss at Fc.
(2) The amplitude ripple is defined as the max. level – min. level over any 36 MHz
block of the given bandwidth.
(3) The phase error is measured over any 36 MHz block of the given bandwidth.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
2
C. MEASUREMENT CIRCUIT:
10nH
10nH
D. OUTLINE DRAWING:
8
K
△: Year Code (2011->1, 2012->2, …, 2019->9, 2020->0)
□: Date Code
Date Code Table:
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
3
E. PCB FOOTPRINT:
F. Frequency Characteristics:
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
4
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
5
Reflection Functions:
S11
S22
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
6
G. PACKING:
1. REEL DIMENSION
(Please refer to FR-75D10 for packing quantity)
2. TAPE DIMENSION
8K
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
7
H. RECOMMENDED REFLOW PROFILE:
1.
2.
3.
4.
Preheating shall be fixed at 150~180℃ for 60~90 seconds.
Ascending time to preheating temperature 150℃ shall be 30 seconds min.
Heating shall be fixed at 220℃ for 50~80 seconds and at 250±10℃ peak (max. 10sec).
Time: 2 times.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
8