TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specification Approval Sheet Product Name: SAW Filter 404 MHz SMD 3.8X3.8 mm(BW=5 MHz) TST Parts No.: TA1348A Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Anne Chen Approved by: Bob Chau Date: 10, 14, 2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 404 MHz MODEL NO.:TA1348A REV. NO.:2 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: -20°C to +70°C 4. Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Center Frequency Passband ripple Unit Fc Insertion Loss ILmin (reference level) (402MHz ~ 405 MHz) 3 Db Bandwidth RoHS Compliant Lead free Lead-free soldering BW-3dB MHz Min. - Typ. 404 Max. - Note - dB - 2.1 2.3 - dB - 0.6 0.8 - dB 5.0 6.0 - - Attenuation (reference to 0 dB) 398.5 MHz dB 30 35 - - 408.5 MHz dB 30 45 - - 383.5 MHz dB 40 50 - - 423.5 MHz dB 40 48 - - Source impedance Zs Ω - 50 - Load impedance ZL Ω - 50 - Note1. No matching network required for operation at 50Ω E. MEASUREMENT CIRCUIT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 D.OUTLINE DRAWING: 1348 T △□ ○ Marking name :1348 △: Year code □ : Week code(Follow the table from planner each year) Product Year Code 2015 Year 2017 2019 Year Code 3 : Input 7: Output 1,2,4,5,6,8 Ground Unit: mm 2016 2018 2020 A a Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 F. Frequency Characteristics : S21 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) 2.TAPE DIMENSION 1348 T△□ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 H. RECOMMENDED REFLOW PROFILE : 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). 4. Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7