TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: 456 MHz 10.4MHz BW SMD7x5mm IF SAW Filter TST Parts No.:TB0492A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Yu Approval by: Francis Chen Date: 2008/5/12 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com 456MHz 10.4MHz BW SMD7x5mm IF SAW Filter MODEL NO.: TB0462A REV No. 1 A. MAXIMUM RATING: 1.Operating Temperature: -40 °C ~ +90 °C 2. Storage Temperature: -40 °C ~ +90 °C 3. Input Power Level: 10 dBm RoHS Compliant Lead free Lead-free soldering B. Characteristics : 1. Ambient Temperature: 25 °C 2. Optimal Source Impedance(Balanced): 200 ohms 3. Optimal Load Impedance(Balanced): 200 ohms Characteristics Center Frequency FC MHz Minimum Insertion Loss Passband Ripple (Fc ± 2.9MHz) dB dB Passband Ripple (Fc ± 5.2MHz) dB Min. Value Typ. Max. - 456.0 - 10.2 11.0 0.8 1.5 1.7 2.0 80 0.44 150 - Group Delay Ripple (Fc ± 5.2MHz) nS Absolute group delay (at Fc) uS Attenuation:( Reference level from minimum insertion loss) 1) Fc ± 10.0MHz …Fc ± 43.0MH dB 37 2) 411 MHz ~ 413 MHz 3) 393 MHz ~ 411 MHz dB dB 4) 343 MHz ~ 393 MHz Temp Coefficient dB ppm/° C2 dB 40 - 40 53 - 40 53 - 42 56 - TAI-SAW TECHNOLOGY CO., LTD. Note - -18 TST DCC Release document - 2 - C. Measurement Circuit: (1) Single end 50 ohm to Single end 50 ohm (2) Balanced 200 ohm to Balanced 200 ohm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. Frequency Characteristics : 1. S21 Response Fig1. Horizontal: 10MHz/Div Vertical: 10dB/Div 2. Pass band Ripple Fig2. Horizontal: 2MHz/Div Vertical: 1dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - 3. Group Delay Ripple Fig2. Horizontal: 2MHz/Div Vertical: 100nS/Div 4. Wide band Response Fig4. Horizontal: 50MHz/Div Vertical: 10dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - E. PCB Footprint F. Outline Drawing: Pin J : Balanced Input or single ended input Pin D : Balanced Output or single ended Output Pin F : Balanced Input return or single ended Input ground Pin L : Balanced Output return or single ended Output ground Pin A,B,C,G,H,I : To be Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 - 2. TAPE DIMENSION H. Recommended Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 8 -