TAI-SAW TB0492A

TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Approval Sheet For Product Specification
Issued Date:
Product Name: 456 MHz 10.4MHz BW SMD7x5mm IF SAW Filter
TST Parts No.:TB0492A
Customer Parts No.:
Customer signature required
Company:
Division:
Approved by :
Date:
Checked by:
Andy Yu
Approval by:
Francis Chen
Date:
2009/10/13
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the changes
TAI-SAW TECHNOLOGY CO., LTD.
FR-71S03-02
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
456MHz 10.4MHz BW SMD7x5mm IF SAW Filter
MODEL NO.: TB0492A
REV No. 2.0
A. MAXIMUM RATING:
RoHS Compliant
Lead free
Lead-free soldering
1.Operating Temperature: -40 °C ~ +90 °C
2. Storage Temperature: -40 °C ~ +90 °C
3. Input Power Level: 10 dBm
B. Characteristics :
1. Ambient Temperature: 25 °C
2. Optimal Source Impedance(Balanced): 200 ohms
3. Optimal Load Impedance(Balanced): 200 ohms
Characteristics
Center Frequency
FC
MHz
Minimum Insertion Loss
Passband Ripple (Fc ± 2.9MHz)
dB
dB
Passband Ripple (Fc ± 5.0MHz)
dB
Min.
Value
Typ.
Max.
-
456.0
-
10.5
11.0
0.8
1.5
1.7
2.0
80
0.44
150
-
Group Delay Ripple (Fc ± 5.2MHz)
nS
Absolute group delay (at Fc)
uS
Attenuation:( Reference level from minimum insertion loss)
1) Fc ± 10.0MHz …Fc ± 43.0MH
dB
37
2)
3)
411 MHz ~ 413 MHz
393 MHz ~ 411 MHz
dB
dB
4) 343 MHz ~ 393 MHz
Temp Coefficient
dB
ppm/˚ C2
-
dB
40
-
40
53
-
40
53
-
42
56
-
TAI-SAW TECHNOLOGY CO., LTD.
Note
-
-18
- 2 -
C. Measurement Circuit:
(1) Single end 50 ohm to Single end 50 ohm
L1=10nH, C1=150pF, L2=10nH, C2=120pF
(2) Balanced 200 ohm to Balanced 200 ohm
TAI-SAW TECHNOLOGY CO., LTD.
- 3 -
D. Frequency Characteristics :
1. S21 Response
2. Pass band Ripple
TAI-SAW TECHNOLOGY CO., LTD.
- 4 -
3. S11 Smith-Chart:
4. S22 Smith-Chart:
TAI-SAW TECHNOLOGY CO., LTD.
- 5 -
E. PCB Footprint
F. Outline Drawing:
Pin J : Balanced Input or single ended input
Pin D : Balanced Output or single ended Output
Pin F : Balanced Input return or single ended Input ground
Pin L : Balanced Output return or single ended Output ground
Pin A,B,C,G,H,I : To be Ground
□ : Week Code (Follow the table from planner each year)
Unit : mm
△ : Product / Year Code
TAI-SAW TECHNOLOGY CO., LTD.
- 6 -
Year
2005
2009
2006
2010
2007
2011
2008
2012
Product Code
B
b
B
b
G. PACKING:
1. REEL DIMENSION
TAI-SAW TECHNOLOGY CO., LTD.
- 7 -
2. TAPE DIMENSION
H. Recommended Reflow Profile:
TAI-SAW TECHNOLOGY CO., LTD.
- 8 -