TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL : 886-3-4690038 FAX : 886-3-4697532 E-mail : [email protected] Web: www.taisaw.com IF SAW Filter 36 MHz MODEL NO.: TB1016A REV. NO.:1 A. FEATURES: 1.IF Filter for Digital TV RoHS Compliant Lead free B. MAXIMUM RATING: Lead-free soldering 1.DC voltage: 12 V. 2.AC voltage: 10 V. Electrostatic Sensitive Device 3.Storage Temperature: -40°C to +85 °C. 4.Operating Temperature: -25 °C to +65 °C Terminating source impedance ZS=50Ω Terminating load impedance ZL=2kΩ//3 pF C. ELECTRICAL CHARACTERISTICS: Attenuation ( ref. : 36 MHz): Characteristics of channel 1 (switching pin 2 connected to ground) Iterms Conditions Specification Unit Min. Typ. Max. Insertion Loss 36.00 MHz dB 17.3 19.3 21.3 B3dB 7.8 MHz Pass 9.0 MHz bandwidth B15dB B30dB MHz 9.5 Lower sidelobe 25.00-31.00 35.0 40.0 dB Upper sidelobe 41.00- 45.00 31.0 38.0 dB Reflected wave signal suppression 40.0 48.0 1,1 ms ... 6,0 ms after main pulse Feedthrough signal suppression 55.0 1,3 ms ... 1,2 ms before main pulse Group delay 32.10~39.90 ns 50 ripple MHz Input Impedance at 36.0 MHz 2.0 || 17.1 KΩ||pF Output Impedance at 36.0 MHz - 2.1 || 4.7 - KΩ||pF Temperature coefficient - -72 - Ppm/℃ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 Characteristics of channel 2 (switching pin 2 connected to pin 1) Iterms Conditions Specification Min. Typ. Max. Insertion Loss 36.00 MHz 18.5 20.5 22.5 B3dB 6.9 Pass 8.0 bandwidth B15dB B30dB 8.5 Lower sidelobe 25.00-31.50 35.0 40.0 Upper sidelobe 40.60- 45.00 31.0 38.0 Reflected wave signal suppression 40.0 48.0 1,1 ms ... 6,0 ms after main pulse Feedthrough signal suppression 48.0 1,3 ms ... 1,2 ms before main pulse Group delay 32.60~39.40 50 ripple MHz Input Impedance at 36.0 MHz 2.3 || 17.8 - KΩ||pF Output Impedance at 36.0 MHz - 2.1 || 4.7 - KΩ||pF Temperature coefficient - -72 - Ppm/℃ Unit dB MHz MHz MHz dB dB ns D.FREQUENCY CHARACTERISTICS: Characteristics of channel 1 (switching pin 2 connected to ground) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Characteristics of channel 2 (switching pin 2 connected to pin 1) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 E.TEST CIRCUIT TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 E. Outline Drawing: Pin No. Functions 1016 T ∆ □ 1. 2. 3. 4. 5. Input Switching-Input Chip carrier-Ground Output Output □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2009 2013 20106 2014 2011 2015 2012 2016 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6