TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 36 MHz MODEL NO.: TB1016A REV. NO.:2 A. FEATURES: 1.IF Filter for Digital TV B. MAXIMUM RATING: 1.DC voltage: 12 V. 2.AC voltage: 10 V. 3.Storage Temperature: -40°C to +85 °C. 4.Operating Temperature: -25 °C to +65 °C Terminating source impedance ZS=50Ω Terminating load impedance ZL=2kΩ//3 pF C. ELECTRICAL CHARACTERISTICS: Electrostatic Sensitive Device Attenuation ( ref. : 36 MHz): Characteristics of channel 1 (switching pin 2 connected to ground) Iterms Conditions Specification Min. Typ. Max. Insertion Loss 36.00 MHz 17.3 19.3 21.3 B3dB 7.8 Pass B15dB 9.0 bandwidth B30dB 9.5 Lower sidelobe 25.00-31.00 35.0 40.0 Upper sidelobe 41.00- 45.00 31.0 38.0 Reflected wave signal suppression 40.0 48.0 1,1 ms ... 6,0 ms after main pulse Feedthrough signal suppression 55.0 1,3 ms ... 1,2 ms before main pulse Group delay 32.10~39.90 50 ripple MHz Input Impedance at 36.0 MHz 2.0 || 17.1 - KΩ||pF Output Impedance at 36.0 MHz - 2.1 || 4.7 - KΩ||pF Temperature coefficient - -72 - Ppm/℃ TAI-SAW TECHNOLOGY CO., LTD. Unit dB MHz MHz MHz dB dB ns TST DCC Release document 2 Characteristics of channel 2 (switching pin 2 connected to pin 1) Iterms Conditions Specification Min. Typ. Max. Insertion Loss 36.00 MHz 18.5 20.5 22.5 B3dB 6.9 Pass 8.0 bandwidth B15dB B30dB 8.5 Lower sidelobe 25.00-31.50 35.0 40.0 Upper sidelobe 40.60- 45.00 31.0 38.0 Reflected wave signal suppression 40.0 48.0 1,1 ms ... 6,0 ms after main pulse Feedthrough signal suppression 48.0 1,3 ms ... 1,2 ms before main pulse Group delay 32.60~39.40 50 ripple MHz Input Impedance at 36.0 MHz 2.3 || 17.8 - KΩ||pF Output Impedance at 36.0 MHz - 2.1 || 4.7 - KΩ||pF Temperature coefficient - -72 - Ppm/℃ Unit dB MHz MHz MHz dB dB ns D.FREQUENCY CHARACTERISTICS: Characteristics of channel 1 (switching pin 2 connected to ground) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Characteristics of channel 2 (switching pin 2 connected to pin 1) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 E.TEST CIRCUIT TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. Outline Drawing Pin No. Functions 1. 2. 3. 4. 5. 1 1 0 6 T Δ □ Input Switching-Input Chip carrier-Ground Output Output □ : Week Code △ : Product / Year Code Product Code Table Year 2009 2013 2010 2014 2011 2015 2012 2016 Product Code B b B b Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w TAI-SAW TECHNOLOGY CO., LTD. x y z TST DCC Release document 6 G. PACKING: 1.A plastic tube contains 28PCS saw filters. 2. double-trough Styrofoam (1:2) The plastic tubes were be placed in the double-trough Styrofoam. One trough contains 1000PCS saw filters, so a double-trough Styrofoam can contains 2000PCS saw filters. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 3. Plastic tube in double-trough Styrofoam view(1:2) 4. Inner carton box (1:4) An inner carton box contains one double-trough Styrofoam. A Bottom left corner of A: TYPE__________ QUANTITY____________ Top right corner of A: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8 5. Inner carton box view Inner Carton Box Packing two unit, each unit with one label 62㊣1.0 Outside l be La l be La 458㊣1.0 Outside 160㊣1.0 Outside double-trough styrofoam Plastic tube each one contains 28pcs One Unit contains1000pcs(35*28pcs+1*20pcs) The Inner Carton Box contains 2000pcs (2*1000pcs) 6. Outer carton box (1:4) A outer carton box contains four inner carton boxes, so one outer carton box contains 8000PCS saw filters. φ=25mm The two sides: The exterior packing should be marked with description of goods, lot number, effective seal, date of leaving factory and quantity. Make sure the goods not damaged during transportation and storage. ( Put suitable filling in the packing cartons) Storage condition after packing 1. Storage temperature:-10℃~+40℃ 2. Storage humidity:40%~70% 3. Using deadline: 2 year after purchasing 4. Soldering Ability should be checked if over the using deadline TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 9 H. RECOMMENDED REFLOW PROFILE 280 260 240 200 180 160 140 120 100 80 60 40 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 20 0 Temp ( Deg C) 220 Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 10