TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 47.25 MHz 6.2MHz BW 13.8x4.6mm Plastic DIP SAW IF Filter TST Parts No.:TB1132A Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Bob Chau Date: 12 / 06 / 2013 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 47.25 MHz MODEL NO.: TB1132A REV. NO.:1 A. FEATURES: 1.IF Filter for Digital TV B. MAXIMUM RATING: 1.DC voltage: 12 V. 2.AC voltage: 10 V. 3.Storage Temperature: -40°C to +85 °C. 4.Operating Temperature: -25 °C to +65 °C Terminating source impedance ZS=50Ω Terminating load impedance ZL=2kΩ//3 pF C. ELECTRICAL CHARACTERISTICS: Electrostatic Sensitive Device Attenuation ( ref. : 47.25 MHz): Center frequency fc Center frequency between 10dB point Insertion attenuation Reference level for the Following data 47.25 MHz 3dB Pass Bandwidth 30dB Pass Bandwidth Lower side lobe 37.00 to 41.65 MHz 41.65 to 43.20 MHz Upper side lobe 51.40 to 52.75 MHz 52.75 to 57.00 MHz Reflected Wave Signal Suppression Feed through Signal Suppression Group delay ripple 44.15 … 50.35 MHz Impedance at 47.25 MHz Input Impedance Output Impedance Temperature Coefficient of frequency MIN. TYP. MAX. - 47.25 - MHz 13.1 14.6 16.1 dB - 6.2 7.7 - MHz MHz 39.0 28.0 42.0 38.0 - dB dB 29.0 33.0 42.0 50.0 42.0 41.0 52.0 56.0 - dB dB dB dB - 40 - ns - 1.1||16.1 2.1||3.5 -72.0 TAI-SAW TECHNOLOGY CO., LTD. - K||pF K||pF ppm/K TST DCC Release document 2 D.FREQUENCY CHARACTERISTICS: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E.TEST CIRCUIT F. Outline Drawing Pin No. Functions 1. 2. 3. 4. 5. 1 1 3 2 T Δ □ Input Input-Ground Chip carrier-Ground Output Output □ : Week Code △ : Product / Year Code 2. 5± 0. 1 2. 5± 0. 2 4. 6± 0. 1 13. 8± 0. 1 2. 54pi t ch 0. 60± 0. 1 TAI-SAW TECHNOLOGY CO., LTD. 0. 30± 0. 1 1. 125± 0. 1 TST DCC Release document 4 Product Code Table Year 2013 2017 . 2014 2018 . 2015 2019 . 2016 2020 . Product Code B b B b Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z G. PACKING 1 Plastic tube (1:5) A plastic tube contains 25PCS saw filters. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 2 .double-trough Styrofoam (1:2) The plastic tubes were be placed in the double-trough Styrofoam. One trough contains 1000PCS saw filters, so a double-trough Styrofoam can contains 2000PCS saw filters. 3. Plastic tube in double-trough Styrofoam view(1:2) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 4. Inner carton box (1:4) An inner carton box contains one double-trough Styrofoam. 5.Inner carton box view Inner Carton Box Packing two unit, each unit with one label La be 75㊣1.0 Outside l La be l 460㊣1.0 Outside 170㊣1.0 Outside double-trough styrofoam Plastic tube each one contains 25pcs One Unit contains 1000pcs(40*25pcs) The Inner Carton Box contains 2000pcs (2*1000pcs) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 6.Outer carton box (1:4) A outer carton box contains four inner carton boxes, so one outer carton box contains 8000PCS saw filters. φ=25mm Storage condition after packing 1. Storage temperature:-10℃~+40℃ 2. Storage humidity:40%~70% 3. Using deadline: 2 year after purchasing Soldering Ability should be checked if over the using deadline 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) I. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8