TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: SAW Resonator 1073.817 MHz SMD 3X3 mm TST Part No.: TC0598A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Marco Huang Approval by: Bob Chau Date: 10/14/2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Resonator 1073.817 MHz MODEL NO.: TC0598A REV. NO.: 1.0 A. FEATURES: 1. 1-Port Resonator. RoHS Compliant Lead free Lead-free soldering B. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC voltage: 3 V Electrostatic Sensitive Device (ESD) 3. Operating Temperature: -40C to +85C 4. Storage Temperature: -40C to +85C C. ELECTRICAL CHARACTERISTICS: Characteristic Units Minimum Typical Maximum MHz dB 1073.692 - 1073.817 2.0 1073.942 2.5 fF μH Ohm pF ppm/c*2 deg.C - 1.04 20.57 18.31 2.18 0.032 25 SMD 3.0X3.0X1.4mm - Center frequency Fr Insertion Loss IL Equivalent Elements Motional capacitance C1 Motional inductance L1 Motional resistance R1 Parallel capacitance Co Temp.coeff. Turnover To Package size - D.EQUVIRENT CIRCUIT: One-Port Resonator: Source Impedance 50Ω Load Impedance C0 #E #B R1 C1 50Ω L1 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - E.OUTLINE DRAWING: Year 2011 2012 2013 … 2019 2020 2021 … Code 1 2 3 … 9 0 1 … TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - F. FREUENCY CHARACTERISTICS: G. TEST CIRCUIT: Network analyzer From 50Ω E B SAW Resonator Network Analyzer To 50Ω Network Analyzer A、 C、 D、 F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - H. LAND PATTERN: I. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - 2. TAPE DIMENSION J. RECOMMENDED REFLOW PROFILE : 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 -