TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: SAW Resonator 737.670MHz SMD 3X3mm TST Part No.: TC0399A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Sam Lin Approved by: Bob Chau Date: 2016/03/09 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Resonator 737.670MHz MODEL NO.: TC0399A REV. NO.: 2.0 A. FEATURES: 1. 1-Port Resonator. RoHS Compliant Lead free Lead-free soldering B. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 3 V 3.Operating Temperature: -40C to +85C 4.Storage Temperature: -40C to +85C C. ELECTRICAL CHARACTERISTICS: Characteristic Units Center frequency Fr Insertion Loss IL Equivalent Elements Motional capacitance C1 Motional inductance L1 Motional resistance R1 Parallel capacitance Co Temp.coeff. Turnover To Package size Minimum Typical Maximum MHz dB 737.626 - 737.670 1.26 737.714 2.0 fF μH Ohm pF ppm/c*2 deg.C - 1.29 36.04 13.71 2.75 0.032 25 SMD 3.0X3.0X1.4mm - - D.EQUVIRENT CIRCUIT: One-Port Resonator: Source Impedance 50Ω Load Impedance C0 #E #B R1 C1 50Ω L1 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - 5 Y E.OUTLINE DRAWING: Date code: Provided by planer each year Year code: 7 for 2007,8 for 2008,… F. FREUENCY CHARACTERISTICS TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - G. TEST CIRCUIT: Network analyzer From 50Ω E B SAW Resonator Network Analyzer To 50Ω Network Analyzer A、 C、 D、 F H. LAND PATTERN: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - I. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION 5Y TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - J. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 -