RT12 www.vishay.com Vishay Sfernice Wirewound Rheostat/Potentiometer FEATURES • 12 W at 25 °C • CCTU 05-03B (PA9) • Vitreous style • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters RT12-PA9 Ø 22.5 ± 1.5 PANEL CUT OUT DETAILS 17 2 M6 x 0.75 Ø 1.1 MIN 15.5 9±1 Ø 3.5 -0 Ø 3 - 0.05 6.5 ± 0.5 1 12.5 ± 2 ACF 70° 22 ± 2 18 ± 2 AS Ø 6.5 MOUNTING SIDE MECHANICAL SPECIFICATIONS LOCKING DEVICE Mechanical Protection: Vitreous Mechanical Travel: 290° + 15° - 10° Operating Torque: 1 Ncm to 10 Ncm End Stop Torque: 25 Ncm Unit Weight: 18.3 g The spindle locking device can be fitted only to special units equipped with a slotted bushing. Order reference: B 1 ± 0.2 ENVIRONMENTAL SPECIFICATIONS Temperature Range: -55 °C +320 °C Climatic Category: CCTU 454 CEI 55/200/56 spanner n° 10 7 panel 3±1 ELECTRICAL SPECIFICATIONS Ohmic Range Tolerance Standard 1 to 2.2 k ± 10 % Power Rating 12 W at 25 °C Variation Law Linear Limiting Element Voltage 300 V Dielectric Strength Insulation Resistance Revision: 13-Oct-15 1000 VRMS 103 M (500 VCC) SPINDLES Ø DISTANCE TO MOUNTING mm PLATE MM SCREW DRIVER SLOT CODE 3 12.5 With ACF 3 22 Without AS Note • For any special requirement on request: spindle flats, etc. Please supply detailed drawing. Document Number: 50025 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RT12 www.vishay.com Vishay Sfernice PARTICULAR CHARACTERISTICS NOMINAL RESISTANCE MAX. SERVICE VOLTAGE V MAX. CURRENT THROUGH WIPER mA 1 3.46 3460 1.5 4.24 2830 2.2 5.14 2340 3.3 6.29 1910 4.7 7.51 1600 6.8 9.03 1330 10 11 1100 15 13.4 900 22 16.3 740 33 19.9 603 47 23.7 505 68 28.6 420 100 34.6 346 150 42.4 283 220 51.4 234 330 62.9 191 470 75.1 160 680 90.3 133 1K 110 110 1.5K 134 90 2.2K 163 74 COMMAND KNOB: 20JF (OPTION) 21 Ø 23 Ø3 16 DIAL: CG45 (OPTION) 4 holes Ø 3.5 4 5 6 3 Ø7 7 2 8 37 45 9 1 10 0 37 45 MARKING Vishay Sfernice trademark, series, style, ohmic value (in or k), tolerance (in %), maximum current in A, manufacturing date ORDERING INFORMATION RT 012 AS 1501 K B XXX MODEL STYLE SPINDLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL DESIGN GLOBAL PART NUMBER INFORMATION R GLOBAL SIZE MODEL RT T 0 1 2 A LOCKING DEVICE (OPT.) WINDING (OPT.) COMMAND SHAFT D BXXX or BXXXX AS = Standard (Diam: 3 mm) ACF 012 As applicable xxx(x) = Internal number Revision: 13-Oct-15 S 4 7 0 OHMIC VALUE The three first digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. 2002 = 20 k 4701 = 4.7 k 48R0 = 48 0R01 = 0.01 1 K B TOLERANCE PACKAGING J=5% K = 10 % B = Bulk BO10 SPECIAL As applicable Ex = DXxx No standard packaging: N = Bulk, qty. open Document Number: 50025 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000