RT100 www.vishay.com Vishay Sfernice Wirewound Rheostat/Potentiometer FEATURES • 100 W at 25 °C • CCTU 05-03B (PA5) • Vitreous style • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters PANEL CUT OUT DETAILS RT100-P A5 85 ± 3 60 50 6 2 holes Ø 5 Ø 10.5 Ø 6 -- 00. 05 A Ø 10 47 Screw M4 54.5 Ø 4.5 18 Ø 10.5 25 ± 2 AS 56 60° 12.5 ± 0.5 Mounting side STANDARD ELECTRICAL SPECIFICATIONS MODEL RT100 RESISTANCE RANGE TOLERANCE ±% RATED POWER P25 °C W VARIATION LAW STANDARD (1) LIMITING ELEMENT VOLTAGE V DIELECTRIC STRENGTH VRMS INSULATION RESISTANCE 1 to 15K 10 100 Linear 850 1500 103M (500 VCC) Note (1) On request: Sectorial winding CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Temperature range Mechanical protection Vitreous Mechanical travel 300° ± 5° Operating torque 4 Ncm to 20 Ncm End stop torque 100 Ncm Climatic category - 55 °C; + 320 °C CCTU 454 CEI 55/200/56 Unit weight Revision: 05-Aug-13 400 g Document Number: 50028 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RT100 www.vishay.com Vishay Sfernice LOCKING DEVICE Supplied as an option the spindle locking device can only be fitted to units with control mounting and locating peg. The part A is removed (see drawing). PARTICULAR CHARACTERISTICS MAX. SERVICE VOLTAGE V NOMINAL RESISTANCE MAX. CURRENT THROUGH WIPER A The available spindle length is according to the panel thickness. 1 10 10 1.5 12.2 8.16 Order reference: DBA6 2.2 14.8 6.74 3.3 18.2 5.50 4.7 21.7 4.61 PANEL CUT OUT DETAILS Ø 4.5 1 ± 0.2 6.8 26.1 3.84 10 31.6 3.16 15 38.7 2.58 22 46.9 2.13 33 57.4 1.74 47 68.6 1.46 68 82.5 1.2 100 100 1 150 122 0.816 220 148 0.674 SPINDLES 330 182 0.550 Ø mm 470 217 0.461 680 261 0.384 2 tightening screws Spanner n¡ 14 12.5 ± 0.5 Max. panel Thickness 6.5 Ø 10.5 DISTANCE TO MOUNTING SCREW DRIVER PLATE mm SLOT 22 6 25 50 CODE Without AD 1K 316 0.316 With ADF 1.5K 387 0.258 With ASF 2.2K 469 0.213 Without AL 3.3K 574 0.174 Without AS 4.7K 686 0.146 6.8K 825 0.121 10K 850 0.085 15K 850 0.057 For any special requirement on request: Spindle flats, etc. Please supply detailed drawing. COMMAND KNOB 41JF (OPTION) DIAL CG78 (OPTION) 4 holes Ø 3.5 21 4 Ø 12 5 6 3 Ø6 7 2 Ø 56 8 1 65 78 9 0 18 2 holes Ø 4.5 10 47 65 78 MARKING Vishay Sfernice trademark, series, style, ohmic value (in or k), tolerance (in %), maximum current in A, manufacturing date. Revision: 05-Aug-13 Document Number: 50028 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RT100 www.vishay.com Vishay Sfernice ORDERING INFORMATION RT 100 AL 6801 K B XXX MODEL STYLE SPINDLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL DESIGN GLOBAL PART NUMBER INFORMATION R GLOBAL SIZE MODEL RT T LOCKING DEVICE (OPT.) 100 Revision: 05-Aug-13 D 1 0 WINDING (OPT.) 0 A COMMAND SHAFT AS = Standard (Diam: 6 mm) AL ASF AD As applicable ADF xxx(x) = Internal number BXXX or BXXXX S 2 2 OHMIC VALUE The three first digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. R 0 K B TOLERANCE PACKAGING J=5% K = 10 % B = Box BO1 SPECIAL As applicable Ex = DXxx 2002 = 20 k 4700 = 470 22R0 = 22 0R01 = 0.01 Document Number: 50028 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000