UNISONIC TECHNOLOGIES CO., LTD ABS2U THRU ABS10U SCHOTTKY BRIDGE 1.0A SCHOTTKY BRIDGE RECTIFIER DESCRIPTION The UTC ABS2U THRU ABS10U is a schottky bridge rectifiers, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high current capability, etc. The UTC ABS2U THRU ABS10U is suitable for surface mount application. - + ABS FEATURES * Low forward voltage drop * High current capability * High surge current capability * Designed for surface mount application SYMBOL ORDERING INFORMATION Ordering Number ABS2UL-ABS-R ABS4UL-ABS-R ABS6UL-ABS-R ABS8UL-ABS-R ABS10UL-ABS-R Package ABS ABS ABS ABS ABS Packing Tape Reel Tape Reel Tape Reel Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-054.A ABS2U THRU ABS10U SCHOTTKY BRIDGE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. RATINGS PARAMETER SYMBOL UNIT ABS2U ABS4U ABS6U ABS8U ABS10U Repetitive Peak Reverse Voltage VRRM 200 400 600 800 1000 V Working Peak Reverse Voltage VRWM 200 400 600 800 1000 DC Blocking Voltage VDC 200 400 600 800 1000 V RMS Voltage VRMS 140 280 420 560 700 V Average Rectified Output Current TA=30°C IO 1.0 A Non-Repetitive Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on IFSM 35 A Rated Load (JEDEC Method) Operating Junction Temperature Range TJ -55~+150 °C Storage Temperature Range TSTG -55~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Mounted on glass epoxy pc board with 1.3mm2 solder pad. 3. Mounted on aluminum substrate PC board with 1.3mm2 solder pad. THERMAL DATA PARAMETER SYMBOL Junction to Ambient θJA Note: Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. RATINGS 62.5 UNIT °С/W ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER Instantaneous Forward Voltage DC Reverse Current at Rated DC Blocking Voltage SYMBOL VF IR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS IF=1.0A TJ=25°C TJ=125°C MIN TYP MAX UNIT 1.1 V 5.0 μA 500 μA 2 of 3 QW-R202-054.A ABS2U THRU ABS10U SCHOTTKY BRIDGE TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-054.A