UNISONIC TECHNOLOGIES CO., LTD MB10F SCHOTTKY BRIDGE 0.8A SCHOTTKY BRIDGE RECTIFIER DESCRIPTION The UTC MB10F is a schottky bridge rectifiers, it uses UTC’s advanced technology to provide customers with high surge current capability, etc. The UTC MB10F is suitable for General purpose use in ac-to-dc bridge full wave rectification for LED bulb and telecommunication. - + MBF FEATURES * Low forward voltage drop * High current capability * High surge current capability * Designed for surface mount application SYMBOL ORDERING INFORMATION Ordering Number MB10FL-MBF-R Package MBF Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 4 QW-R202-042.A MB10F SCHOTTKY BRIDGE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise noted) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load,derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VDC 1000 V RMS Voltage VRMS 700 V Repetitive Peak Reverse Voltage VRRM 1000 V TA=40°C (Note 2) 0.5 A IO Average Forward Rectified Current TA=40°C (Note 3) 0.8 A Peak Forward Surge Current, 8.3ms Single Half Sine-Wave IFSM 30 A Superimposed on Rated Load Operating Junction Temperature Range TJ -55~+125 °C Storage Temperature Range TSTG -55~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Mounted on glass epoxy pc board with 1.3mm2 solder pad. 3. Mounted on aluminum substrate PC board with 1.3mm2 solder pad. THERMAL DATA PARAMETER SYMBOL Junction to Ambient θJA Note: Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. RATINGS 60 UNIT °С/W ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER Instantaneous Forward Voltage DC Reverse Current at Rated DC Blocking Voltage SYMBOL VF IR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS IF=0.8A TJ=25°C TJ=125°C MIN TYP MAX UNIT 1.1 V 5.0 μA 500 μA 2 of 4 QW-R202-042.A MB10F SCHOTTKY BRIDGE TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R202-042.A MB10F SCHOTTKY BRIDGE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R202-042.A