Series REC 16 LA www.vishay.com Vishay Sfernice Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element (Sealed Series/Ø 16 mm) FEATURES • Large range of strokes from 25 mm to 2000 mm • High accuracy • Very good repeatability • Continuous resolution • Easy mounting • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Those sensors are to be installed in the high pressure chamber of cylinders and are equipped with glass-sealed electrical outputs. Sensor type Output type Market appliance Dimensions LINEAR, conductive plastic Wires Industrial L x 16 mm dia. (with L = TET + 77 mm) ELECTRICAL SPECIFICATIONS Theoretical electrical travel (TET = E) Independent linearity over TET On request From 25 mm to 2000 mm in increments of 25 mm ± 1 %; ± 0.1 % ± 0.05 % if E 100 mm, ± 0.025 % if E 200 mm Actual electrical travel (AET) TET + 6 mm ± 0.5 150 /cm Total resistance RT Resistance tolerance at 20 °C ± 20 % 0.01 % Repeatability Maximum power rating Wiper current Load impedance 0.05 W/cm at 70 °C, 0 W at 125 °C Recommended: a few μA - 1 mA max. (continuous) 1000 times RT minimum Insulation resistance > 1000 M 500 VDC Dielectric strength > 300 VRMS at 50 Hz MECHANICAL SPECIFICATIONS Mechanical travel MT MT = TET Body Anodized aluminum Rod internal diameter 16 LA: Ø 18 mm Support Stainless steel Operating force Sealing 1 N typical Glass-sealing on electrical outputs Electrical outputs On request Oil Connector Wires Insulating mineral hydraulic Pressure Wiper 300 bars continuous, 1000 bars accidentally Precious metal multifinger PERFORMANCE Life 25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET Temperature limits Speed at 20 °C -20 °C to +80 °C 1.5 m/s max. Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 26-Mar-15 Document Number: 54018 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series REC 16 LA www.vishay.com Vishay Sfernice DIMENSIONS in millimeters, general tolerance ± 1 mm L = TET + 77 55 MAX. O. RING Ø +0 A - 0.2 AET = TET + 6 53 CONNECTOR Ø 36 0 Ø 20 +- 0.2 0 Ø 24 +- 0.05 ØA 8.5 7 L ≤ 500 ØC + 0.2 - 0.2 17 MT = TET 3 L > 500 18 + 0.4 Ø D + 0.1 + 0.6 + 0.2 Ø D + 0.1 Ø B-0 MODEL E +- 00.1 DIMENSIONS + 0.1 - 0.1 +1 F -0 G 16 LA A B C D E F G 18 25.2 24 18 1.3 17.8 16.3 ELECTRICAL CONNECTIONS PIN 3 OR GREEN WIRE: + PIN 2 OR RED WIRE: WIPER PIN 1 OR YELLOW WIRE: TET AET TET = Theoretical electrical travel AET = Actual electrical travel MOUNTING IN ACTUATOR Revision: 26-Mar-15 Document Number: 54018 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series REC 16 LA www.vishay.com Vishay Sfernice DIMENSIONS in millimeters, general tolerance ± 1 mm OTHER DESIGNS OF SUPPORT ...W04200 50 13 12 15 12 Ø 32 Ø 25 + 0.02 Ø 31.7 - 0 Ø 50 MAX. M 42 x 1.5 ...W04700 ...W04707 47 MAX. 23 23 O. RING + BACK-UP RING Ø 23 -- 0.05 0.1 2 - 0.007 Ø 23 - 0.02 Ø 23 -- 0.02 0.041 Ø 18 Ø 18.9 f7 - 0.05 Ø 23 - 0.1 Ø 18.4 - 0.05 2.25 Ø 23 - 0.1 5 4 4 4 11 5 8 ORDERING INFORMATION/DESCRIPTION REC 16 LA 4 D 152 W... e. SERIES MODEL TYPE THEORETICAL ELECTRICAL TRAVEL LINEARITY RESISTANCE MODIFICATIONS LEAD FINISH Sealed Times 25 mm A: ± 1 % D: ± 0.1 % E: ± 0.05 % F: ± 0.025 % First 2 digits are significant numbers 3rd indicates number of zeros Special feature code number SAP PART NUMBERING GUIDELINES RE 16 LA 4 D 152 W.... SERIES MODEL TET LINEARITY OHMIC VALUE SPECIAL FEATURES Revision: 26-Mar-15 Document Number: 54018 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000