Precision Potentiometers, Position Sensors

VISHAY I N T E R T E C H N O L O G Y , I N C .
INTERACTIVE
data book
precision potentiometers,
Position sensors
vishay
vse-db0100-1310
Notes:
1.
To navigate:
a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents
page to go to the main Table of Contents page.
b) Click on the products within the Table of Contents to go directly
to the datasheet.
c) Use the scroll or page up/page down functions.
d) Use the Adobe ® Acrobat ® page function in the browser bar.
2.
To search the text of the catalog use the Adobe ® Acrobat ® search function.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
VARIABLE RESISTORS
Vishay Intertechnology, Inc.
Vishay
PRECISION POTENTIOMETERS,
POSITION SENSORS
Data Book
V I S H AY
• S i n g l e Tu r n R o t a t i o n a l C o n d u c t i v e P l a s t i c F i l m Te c h n o l o g y
• L i n e a r M o t i o n Tr a n s d u c e r s
• Multiturn Wirewound Precision Potentiometers
• C o u n t i n g Tu r n s D i a l s
• S i n g l e Tu r n W i r e w o u n d P r e c i s i o n P o t e n t i o m e t e r s
• P o s i t i v e S e n s o r s i n H a l l E f f e c t Te c h n o l o g y
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
VSE-DB0100-1310
VARIABLE RESISTORS
Vishay
SEMICONDUCTORS
MOSFETs
Low-Voltage TrenchFET® Power MOSFETs
Medium-Voltage Power MOSFETs
High-Voltage Planar MOSFETs
High-Voltage Super Junction MOSFETs
Automotive-Grade MOSFETs
ICs
Power Management and Power Control ICs
Smart Load Switches
Analog Switches and Multiplexers
DIODES SEGMENT
PRODUCT LISTINGS
Vishay Intertechnology, Inc.
MOSFETS SEGMENT
Rectifiers
Schottky Rectifiers
Ultra-Fast Recovery Rectifiers
Standard and Fast Recovery Rectifiers
High-Power Rectifiers/Diodes
Bridge Rectifiers
Small-Signal Diodes
Schottky and Switching Diodes
Zener Diodes
Tuner/Capacitance Diodes
Bandswitching Diodes
RF PIN Diodes
Protection Diodes
TVS Diodes or TRANSZORB®
(uni-directional, bi-directional)
ESD Protection Diodes (including arrays)
Thyristors/SCRs
Phase-Control Thyristors
Fast Thyristors
Power Modules
Input Modules
(diodes and thyristors)
Output and Switching Modules
(contain MOSFETs, IGBTs, and diodes)
Custom Modules
OPTOELECTRONIC COMPONENTS
SEGMENT
Infrared Emitters and Detectors
Optical Sensors
Infrared Remote Control Receivers
Optocouplers
Phototransistor, Photodarlington
Linear
Phototriac
High-Speed
IGBT and MOSFET Driver
Solid-State Relays
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
PASSIVE COMPONENTS
RESISTORS AND INDUCTORS SEGMENT
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Vitreous, Cemented, and Housed Resistors
Braking and Neutral Grounding Resistors
Custom Load Banks
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Contactless Potentiometers
Networks/Arrays
Non-Linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
Magnetics
Inductors
Transformers
Coils
Connectors
CAPACITORS SEGMENT
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Capacitors
VSE-DB0100-1310
Precision Potentiometers,
Position Sensors
Vishay Spectrol, Inc
Vishay S.A.
4051 Greystone Drive
Ontario
California 91761
U.S.A.
Phone: +1 909 923 3313
Fax: +1 909 923 6765
www.vishay.com
199, bd de la Madeleine
B.P. 1159
06003 Nice Cedex 1
France
Phone: +33 4 93 37 27 27
Fax: +33 4 93 37 27 26
www.vishay.com
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of
June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE)
- recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Table of Contents
www.vishay.com
Vishay
Precision Potentiometers, Position Sensors
General Information ..................................................................................................................................................................
4
Application Notes .....................................................................................................................................................................
8
General Performances ..............................................................................................................................................................
9
PLASTIC FILM TECHNOLOGY
ROTATIONAL
Industrial Models
Model 138
1 5/16" (33.3 mm) Industrial Single Turn, Bushing Mount, Conductive Plastic ..................... 11
Model 157
Model 357
7/ "
8
7/ "
8
Model 657
Industrial Rotary Position Sensor, Bushing Mount Type, Conductive Plastic ...................... 17
Model 970-1036
Industrial Sensor for Harsh Environment (Throttle Position/Through Hole) ......................... 19
(22.2 mm) Bushing and Servo Mount Precision Potentiometer, Conductive Plastic ....... 13
(22.2 mm) Conductive Plastic Potentiometer, Bushing Mount Type ............................. 15
Model 971
Throttle Position Sensor with Integrated Spring Return System .......................................... 21
Series ECO
Precision Rotative Transducers, Conductive Plastic, Economic Series (ECO) ................... 23
Series ECS
Precision Rotative Transducers, Conductive Plastic, Economic Series (ECS) .................... 26
Series KIT RMF
Conductive Plastic Rotative Transducer Elements (KIT) ..................................................... 28
Professional Models
Model 128
1 1/16" (27 mm) Single Turn Conductive Plastic Precision Potentiometer ............................ 30
Model 208
1 3/4" (44.5 mm) Single Turn Conductive Plastic Precision Potentiometer
Model 308
2" (50.8 mm) Single Turn Conductive Plastic Precision Potentiometer ............................... 36
Model 708
7/ "
8
......................... 33
(22.2 mm) Single Turn Conductive Plastic Precision Potentiometer ............................. 39
Series ROT/BF
Precision Rotative Transducers, Conductive Plastic, Bushing Mounting ............................. 42
Series ROT/SF
Precision Rotative Transducers, Conductive Plastic, Servo Mounting ................................. 45
Series 116 BFZ-SFZ
Precision Rotative Transducers 360° Special Laws: Sine/Cosine ....................................... 47
LINEAR
Industrial Models
Series REC 10 LA
Precision Linear Transducers, Designed for Mounting in Hydraulic or
Pneumatic Cylinder, Conductive Plastic (Sealed Series/Ø 10 mm) ..................................... 50
Series REC 10 LH
Precision Linear Transducers, Designed for Mounting in Hydraulic or 
Pneumatic Cylinder, Conductive Plastic Element (Unsealed Series/Ø 10 mm) .................. 52
Series REC 16 LA
Precision Linear Transducers, Designed for Mounting in Hydraulic or 
Pneumatic Cylinder, Conductive Plastic Element (Sealed Series/Ø 16 mm) ...................... 54
Series REC 16 LH
Precision Linear Transducers, Designed for Mounting in Hydraulic or 
Pneumatic Cylinder, Conductive Plastic Element (Unsealed Series/Ø 16 mm) .................. 57
Series REC 110 L
Precision Linear Transducers, Conductive Plastic, up to 450 mm ....................................... 59
Series REC 115 L
Precision Linear Transducers, Conductive Plastic, up to 1000 mm ..................................... 63
Series REC 139 L
Precision Linear Transducers, Conductive Plastic, up to 3000 mm ..................................... 65
Series KIT LMF
Conductive Plastic Motion Transducer Elements (KIT), up to 1000 mm ............................. 67
Professional Models
Series REC 34 L
Precision Linear Transducers, Conductive Plastic, up to 450 mm ....................................... 69
Series REC 38 L
Precision Linear Transducers, Conductive Plastic, up to 150 mm ....................................... 72
Series REC 50 L
Precision Linear Transducers, Conductive Plastic, up to 300 mm ....................................... 74
Revision: 09-Oct-13
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table of Contents
www.vishay.com
Vishay
WIREWOUND TECHNOLOGY
SINGLE TURN MODELS
Model 100
1 5/16" (33.3 mm) Single Turn Wirewound Precision Potentiometer .................................... 78
Model 122
1 1/16" (27 mm) Single Turn Wirewound Precision Potentiometer ....................................... 81
Model 132
1 5/16" (33.3 mm) Low Cost Industrial Single Turn Wirewound, Bushing Mount Type .........
1/ " (12.7 mm) Single - Turn Wirewound Bushing Mount Type Precision Potentiometer .....
2
1/ " (12.7 mm) Single - Turn Wirewound Servo Mount Type Precision Potentiometer ........
2
7/ " (22.2 mm) Single Turn Wirewound, Precision Potentiometer ........................................
8
1 3/4" (44.5 mm) Single Turn Wirewound Precision Potentiometer ......................................
Model 140
Model 142
Model 152
Model 202
84
86
88
90
93
Model 302
2" (50.8 mm) Single Turn Wirewound Precision Potentiometer ........................................... 96
Model 702
7/ "
8
(22.2 mm) Single Turn Wirewound Precision Potentiometer ......................................... 99
MULTITURN MODELS
Model 162
Model 164
Model 502
Model 533, 534, 535
Model 536
Model 552
Model 802
Model 830
Model 852
Model 860
1/ " (12.7 mm) Ten Turn Wirewound Bushing Mount Precision Potentiometer ....................
2
1/ " (12.7 mm) Ten Turn Wirewound Servo Mount Precision Potentiometer .......................
2
7/ " (22.2 mm) Ten-Turn Wirewound Upper Grade Precision Potentiometer .......................
8
7/ " (22.2 mm) Multiturn Wirewound 533: 3 Turns/534: 10 Turns/535: 5 Turns ...................
8
7/ " (22.2 mm) Ten Turn Wirewound Precision Potentiometer with a Plastic Shaft .............
8
7/ " (22.2 mm) Three Turn Wirewound Upper Grade Precision Potentiometer ....................
8
1 13/16" (46 mm) Ten Turn Wirewound Upper Grade Precision Potentiometer ....................
1 13/16" (46 mm) Three Turn Wirewound Bushing Mount .....................................................
1 13/16" (46 mm) Three Turn Wirewound Upper Grade Precision Potentiometer .................
1 13/16" (46 mm) Ten Turn Wirewound, Bushing Mount .......................................................
103
105
107
110
113
116
119
122
125
128
NON-CONTACTING HALL EFFECT SENSORS
ROTATIONAL
SINGLE TURN MODELS
Industrial Market Applications
Model 351 HE
Bushing Mount Hall Effect Sensor, Size 09 (22.2 mm) Comoulded Plastic Housing .......... 132
Model 601 HE
Full 360° Smart Sensor (Hall Effect Technology), Output Type: Connector ........................ 136
Model 631 HE
Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) Aluminum Housing........................ 138
Model 981 HE
Throttle Position Sensor in Hall Effect Technology Hollow and D-Shaft Versions .............. 142
Model 151 HE
Servo Mount with Ball Bearings Hall Effect Sensor in Size 09 (22.2 mm) ........................... 147
Professional Market Applications
Model 50 SHE
Servo Mount Hall Effect Sensor in Size 05 (12.7 mm) ......................................................... 151
Model 78 SHE
Servo Mount Hall Effect Sensor in Size 09 (22.2 mm) ........................................................ 155
Kit Models
RM HE
Rotative Transducer Elements in Hall Effect Technology .................................................... 159
MULTITURN MODELS
34 THE
Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) ..................... 163
LINEAR
20 LHE
Revision: 09-Oct-13
Linear Position Sensor in Hall Effect Technology (0 mm to 10 mm max.) ........................... 169
2
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table of Contents
www.vishay.com
Vishay
ACCESSOIRIES
DIALS
Model 11
25.4 mm Diameter Eleven Turn Dial .................................................................................... 173
Model 15
Rectangular 10 Turn Dial (3 Digit), (4 Digit) 100 Turn ......................................................... 174
Model 18
Model 18 (PR2) 22.2 mm Diameter, 15 Turn Dial ................................................................ 175
Model 21
46 mm Diameter 15 Turn Dial .............................................................................................. 177
Model 21P
46 mm Diameter Eleven Turn Dial ....................................................................................... 178
Model 23
Multidial 10 Turns 30.6 mm Diameter Projecting Design ..................................................... 179
Model 25
Model 25 (PR1) 46 mm Diameter, 20 Turn Dial ................................................................... 180
Model 26
Multidial 10 Turns 30.6 mm Diameter Recessed Design ..................................................... 181
Model 28
28 mm Diameter Twenty-One Turn Dial .............................................................................. 182
Revision: 09-Oct-13
3
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
General Information
www.vishay.com
Vishay Sfernice
Technical Parameters - Definitions
1.1 PRECISION POTENTIOMETER
2.6 INDEPENDENT LINEARITY
A mechanical-electrical transducer dependent upon the
relative position of a moving contact (wiper) and a resistance
element for its operation. It delivers to a high degree of
accuracy, a voltage output that is some specified function of
applied voltage and shaft position.
The maximum deviation of the actual function characteristic
from a straight reference line with its slope and position
chosen to minimize the maximum deviations. It is expressed
as a percentage of the total applied voltage and is measured
over the specified theoretical electrical travel.
1.2 WIREWOUND PRECISION
POTENTIOMETER
A precision potentiometer characterized by a resistance
element made up of turns of wire on which the wiper
contacts only a small portion of each turn.
C max.
MAX. + AND DEVIATIONS ARE
MINIMIZED
2.1 TOTAL APPLIED VOLTAGE “E”
B
The total voltage applied between the designated input
terminals.
0
θ
TRAVEL
INDEPENDENT
LINEARITY LIMITS
e/E OUTPUT RATIO
1.0
1.0
THEORETICAL
ELECTRICAL TRAVEL (θT)
E = Total applied voltage (peak to peak applied voltage).
ELECTRICAL CONTINUITY TRAVEL
2.2 OUTPUT VOLTAGE “e”
The voltage between the wiper and the designated
reference point. Unless otherwise specified, the designated
reference point is the CCW terminal.
2.3 OUTPUT RATIO “e/E”
The ratio of the output voltage to the designated input
reference voltage. Unless otherwise specified the reference
voltage is the total applied voltage.
2.4 CONFORMITY
The fidelity of the relationship between the actual function
characteristic and the theoretical function characteristic.
2.7 ABSOLUTE LINEARITY
This linearity is harder to achieve than the one above
because it is the maximum deviation of the actual function
characteristic from a fully defined straight reference line. It is
expressed as a percentage of the total applied voltage and
measured over the theoretical electrical travel. An index
point on the actual output is required.
The straight reference line may be fully defined by specifying
the low and high theoretical end output ratios separated by
the theoretical electrical travel. Unless otherwise specified,
these end output ratios are 0.0 and 1.0, respectively.
Mathematically:
e
--- = A  /T  + B  C
E
Mathematically:
e
--- = f     C
E
2.5 LINEARITY
Where A is a given slope; B is a given intercept at q = 0.
Unless otherwise specified A = 1; B = 0.
A specific type of conformity where theoretical function
characteristic is a straight line.
e/E OUTPUT RATIO
1.0
Mathematically:
e
--- = f     C = A    + B  C
E
GIVEN
INTERCEPT
Where A is a given slope; B is a given intercept at q = 0.
eI/E
THEORETICAL FUNCTION
CHARACTERISTIC
C max.
INDEX POINT
θI =
eI/E =
ABSOLUTE
LINEARITY LIMITS
ACTUAL FUNCTION
CHARACTERISTIC
B
0
θI
TRAVEL θ
TOTAL THEORETICAL
ELECTRICAL TRAVEL (θT)
1.0
ELECTRICAL CONTINUITY TRAVEL
Revision: 09-Jan-08
Document Number: 54001
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
General Information
www.vishay.com
Vishay Sfernice
2.8 GRADIENT
3.5 NOISE (wirewound potentiometers only)
The rate of change of output ratio relative to shaft travel.
de/E
G = -------------  mV/V/ 
d
(rotational)
de/E
G = -------------  mV/V/mm 
d
Any spurious variation in the electrical output not present in
the input defined quantitatively in terms of an equivalent
parasitic transient resistance in ohms, appearing between
the contact and the resistance element when the shaft is
rotated or translated (the wiper is excited by a specified
current and moved at a specified speed).
3.6 END VOLTAGE
(linear)
2.9 INDEX POINT
A point of reference fixing the relationship between a
specified shaft position and the output ratio. It is used to
establish a shaft position reference.
The voltage between the wiper terminal and an end terminal
when the shaft is positioned at the corresponding end of
electrical continuity travel. End voltage is expressed as a
percentage of the total applied voltage.
3.7 VOLTAGE TAP
3.1 LIFE
The number of shaft revolutions or translations obtainable
under specific operating conditions and within specified
allowable degradations of specific characteristics.
3.2 RESOLUTION
A measure of the sensitivity to which the output ratio of the
potentiometer may be set.
Theoretically
infinite
for
plastic
film
precision
potentiometers.
For wirewound: The reciprocal of the number of turns of wire
in resistance winding in the actual electrical travel expressed
as a percentage
N = total number of resistance wire turns
1/N x 100 = Theoretical resolution percent
An electrical connection fixed to the resistance element
which introduces no significant distortion in the output
characteristic.
A voltage tap usually has significant tap resistance and may
not be capable of carrying rated element current. A voltage
tap involves a fourth turret which delivers a fixed voltage.
This voltage only depends on the position of the tap on the
track and of the total applied voltage. It is usually located at
the middle of the TET.
Soldering Point
Track
4th Turret
TAP
3.3 REPEATABILITY
It is the maximum difference found on the output ratio for a
same mechanical position all along the theoretical electrical
stroke after several travels. It is expressed as a percentage
of the total applied voltage.
3.8 CURRENT TAP
An electrical connection fixed to the resistance element
which is capable of carrying rated element current and may
distort the output characteristic.
3.4 OUTPUT SMOOTHNESS
(non wirewound only)
4th Turret
Output smoothness is a measurement of any spurious
variation in the electrical output not present in the input. It is
expressed as a percentage of the total applied voltage and
measured for specified travel increments over the
theoretical electrical travel. Output smoothness includes
effects of contact resistance variations, resolution, and
other micrononlinearities in the output.
TAP
Soldering Point
Track
Silver Pad
0.7 mm min.
U
UCC
Ucc: maximum variations peak to peak.
U
CC
RTS = -------------  100 = ..... %
E
Revision: 09-Jan-08
Document Number: 54001
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
General Information
www.vishay.com
Vishay Sfernice
3.9 CONTACT RESISTANCE
4.5 DIELECTRIC WITHSTANDING VOLTAGE
The resistance appearing between the wiper and the
resistive element when the shaft is rotated or translated. The
wiper of the potentiometer is excited by a specific current
and moved at a specified speed over a specified portion of
the actual electrical travel.
Ability to withstand under prescribed conditions a specified
potential of a given characteristic between the terminals of
each cup and the exposed conducting surfaces of the
potentiometer, or between the terminals of each cup and the
terminals of every other cup in the gang without exceeding
a specified leakage current value.
Potentiometer
Under Test
Ι
4.6 INSULATION RESISTANCE
The resistance to a specified impressed DC voltage
between the terminals of each cup and the exposed
conducting surfaces of the potentiometer, or between the
terminals of each cup and the terminals of every other cup
in the gang under described conditions.
RC
Constant
Current
Generator
0.1 mA or 1 mA
Contact
Resistance: RC
V
4.7 POWER RATING
The maximum power that a potentiometer can dissipate
under specified conditions while meeting specified
performance requirements.
4.8 OUTPUT IMPEDANCE
V = RC x I
4.1 THEORETICAL ELECTRICAL TRAVEL: TET
The specified shaft travel over which the theoretical function
characteristic and its associated conformity limits are
respected.
Maximum impedance between wiper and either end
terminal with the input shorted, and measured at a specified
voltage and frequency.
Short
4.2 ACTUAL ELECTRICAL TRAVEL: AET
Output Impedance
The total travel of the shaft between the two points at which
the first and the last measurable change in output ratio
occur.
4.3 MECHANICAL TRAVEL: MT
5.1 SHAFT RUNOUT
The total travel of the shaft between integral stops. In
potentiometers without stops, the mechanical travel is
continuous (rotationals only!).
The eccentricity of the shaft diameter with respect to the
rotational axis of the shaft, measured at a specified distance
from the end of the shaft. The body of the potentiometer is
held fixed and the shaft is rotated with a specified load
applied radially to the shaft. The eccentricity is expressed in
inches, TIR.
-E
TET
Laser trimmed part
of the track
+E
5.2 LATERAL RUNOUT
AET
Total resistive track
Stop
Stop
MT
Mechanical travel
The perpendicularity of the mounting surface with respect to
the rotational axis of the shaft, measured on the mounting
surface at a specified distance from the outside edge of the
mounting surface. The shaft is held fixed and the body of the
potentiometer is rotated with specified loads applied radially
and axially to the body of the pot. The Lateral Runout is
expressed in inches, TIR.
4.4 STARTING TORQUE
5.3 PILOT DIAMETER RUNOUT
The moment in the clockwise and counterclockwise
directions required to initiate shaft rotation anywhere in the
total mechanical travel.
The eccentricity of the pilot diameter with respect to the
rotational axis of the shaft, measured on the pilot diameter.
The shaft is held fixed and the body of the potentiometer is
rotated with a specified load applied radially to the body of
the pot. The eccentricity is expressed in inches, TIR.
Revision: 09-Jan-08
Document Number: 54001
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
General Information
www.vishay.com
Vishay Sfernice
5.4 SHAFT RADIAL PLAY
5.5 SHAFT END PLAY
The total radial excursion of the shaft, measured at a
specified distance from the front surface of the unit. A
specified radial load is applied alternately in opposite
directions at a specified point. Shaft Radial Play is
expressed in inches.
The total axial excursion of the shaft, measured at the end
of the shaft with a specified axial load supplied alternately in
opposite directions. Shaft End Play is expressed in inches.
5.6 SEALING LEVELS
See below “Protection Levels”
PROTECTIONS LEVELS
FIRST DIGIT
PROTECTION AGAINST SOLID SUBSTANCES
SECOND DIGIT
PROTECTION AGAINST LIQUIDS
IP
Tests
IP
Tests
0
Without protection
0
Without protection
1
Protected against solid substances
(size > 50 mm)
1
Protected against water drops
(condensation)
2
Protected against solid substances
(size > 12 mm)
2
Protected against water drops from
up to 15 feet
3
Protected against solid substances
(size > 2.5 mm)
3
Protected against water drops
up to 60 feet
4
Protected against solid substances
(size > 1 mm)
4
Protected against water drops
above 60 feet
5
Protected against dust
(> 0.1 mm < 1 mm)
5
Protected against splashes of water
in all directions
6
Fully protected against dust
6
Protected against projections of water
in all directions
7
Protected against action of immersion
< 15 cm and water jet pressure all directions
8
Protected against long time action of
immersion < 1 meter and water jet
pressure in all directions
Note
• To symbolize the protection levels, we use ip letters followed by 2 digits
Examples:
IP50
Sealing level:
Protected against dust but not water.
IP65
Sealing level:
Protected against dust and splashes of water in all
directions.
These 2 levels are the most frequently met ones.
Revision: 09-Jan-08
Document Number: 54001
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Application Notes
www.vishay.com
Vishay Sfernice
VOLTAGE DIVIDER
In order to reach the same performances than the ones we
achieve during final quality control, for parameters like:
linearity, lifespan, micro linearity, all along the temperature
range, our precision potentiometers must work accordingly
to the principle of a voltage divider.
The drawing is showing one of the most common and
recommended way to connect a precision potentiometer,
the wiper output is connected to an operational amplifier,
the high input impedance of the amplifier maintains the
current at a low level (I.e. < 1 μA).
10 V
+
0.1 µA
EX. 741
Nearly all the current remains in the potentiometer track, the
current in the wiper is too low to generate a significant
disturbance and the potentiometer works as a voltage
divider.
A recommended value for the load impedance is generally
specified as 1000 times the total ohmic value of the
potentiometer.
MOUNTING TYPES
1. Servo Mounting
3 clamps are screwed into the mounting plate after being
inserted in the groove of the front plate. The potentiometer
is centered on its flange diameter inside the mounting plate.
2. Bushing Mount
The potentiometer is fixed on the mounting plate when the
nut (+ washer) is screwed onto the bushing. The antirotation
pin prevents the potentiometer from turning.
3. Screw Mounting
The front plate of the potentiometer has 3 drilled holes,
3 screws are used to assemble the mounting plate together
with the potentiometer.
Revision: 09-Jan-08
Document Number: 54022
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
General Performances
www.vishay.com
Vishay Sfernice
GENERAL PERFORMANCES
Rotational Speed
Temperature Range
Temperature Coefficient
600 RPM (Shaft guiding: Ball bearings):
150 RPM (Shaft guiding: Sleeve bearing)
- 55 °C to + 125 °C
- 300 ppm/°C ± 500 ppm/°C
Resolution
Essentially infinite for conductive plastic technology
Lifespan
Depending on the model; up to 50 million revolutions
Drift of Performances Along Life
Revision: 09-Jan-08
Some parameters like: linearity, contact resistance, ohmic value are changing along the
life of the products, first two ones can typically increase by 50 % at mid life (20M cycles);
third one can decrease by a few percents (negative TC).
Document Number: 54021
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Industrial Models
Plastic Film
Technology
Rotational
Model 138 ............................
11
Model 157 .............................
13
Model 357 .............................
15
Model 657 .............................
17
Model 970-1306 ....................
19
Model 971 .............................
21
Series ECO ..........................
23
Series ECS ...........................
26
Series KIT RMF ....................
28
Professional Models
Model 128 ............................
30
Model 208 ............................
33
Model 308 ............................
36
Model 708 ............................
39
Series ROT/BF .....................
42
Series ROT/SF .....................
45
Series 116 BFZ-SFZ ............
47
Model 138
www.vishay.com
Vishay Spectrol
1 5/16" (33.3 mm) Industrial Single Turn,
Bushing Mount, Conductive Plastic Potentiometer
FEATURES
• Center tap available
• Continuous rotation and mechanical stops both
standard
QUICK REFERENCE DATA
• Suitable model for all types of industrial
applications
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, conductive plastic
Output by turrets
Industrial
1 5/16" (33.3 mm)
Dimensions
ELECTRICAL SPECIFICATIONS
PARAMETER
MIL-PRF-39023 TEST PROCEDURES APPLY
Ohmic Value Range
STANDARD
SPECIAL
1 k to 50 k
1 k to 50 k
Tolerance
Linearity (independent)
± 10 %
±5%
STANDARD
BEST PRACTICAL
± 0.5 %
± 0.25 %
Output Smoothness
0.1 % maximum
Power Rating
40 °C ambient
2W
derated to zero at 125 °C
Electrical Angle
Continuous
345° ± 4°
Stops
340° ± 5°
Insulation Resistance
1000 M minimum at 500 VDC
Dielectric Strength
1000 VRMS, 60 Hz
Absolute Minimum Resistance
1.0 % of total resistance
Minimum Voltage
0.5 % maximum
Temperature Coefficient of Resistance
± 600 ppm/°C maximum
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing
Molded glass filled thermoplastic
Vibration
Rear Lid
Glass filled thermoset plastic
Shock
50 g
Shaft
Stainless steel, non-magnetic
Salt Spray
48 h
Terminals
Brass, plated for solderability,
non-passivated
Rotational Life
Mount Hardware
Lockwasher Internal Tooth:
Panel nut:
15 g thru 2000 Hz
2 million
Shaft Revolutions
Operating Temperature Range
Steel, nickel plated
Brass, nickel plated
- 55 °C to + 125 °C
ORDERING INFORMATION/DESCRIPTION
138
B
0
0
20K
BO10
MODEL
BUSHING
MOUNT
MECHANICAL
OPTIONS
OTHER OPTIONAL
FEATURES
RESISTANCE CODE
PACKAGING
0. Continuous
2. Stops
0. Standard (end taps)
1. Center tap (within
5° of electrical center)
Box of 10 pieces
Other characteristics will be standard as described on this specification sheet. If special characteristics are required such as special linearity
tolerance, special resistance tolerance, non-linear functions, etc., please state these on your order.
Revision: 08-Apr-13
Document Number: 57033
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 138
www.vishay.com
Vishay Spectrol
SAP PART NUMBERING GUIDELINES
138
B
2
1
103
B10
MODEL
STYLE
MECHANICAL
OPTIONS
FEATURES
OHMIC VALUE
PACKAGING
With stops
With center tap
Box of 10 pieces
DIMENSIONS in inches (millimeters)
± 0.031
MODEL 138B/138-...
0.875
(22.22)
± 0.015
0.625
(15.88)
60°
0.187
(4.75)
± 0.015
Ø 0.500
(12.70)
BC
± 0.015
+ 0.0000
- 0.0020
Ø 0.4062 MTG. (10.32)
± 0.015
0.375
(9.52)
0.032
(0.81)
0.062
(1.57)
± 0.010
+ 0.0000
- 0.0003
Ø 0.2497 (6.34)
0.030 MAX. (0.76)
0.562 (14.27)
± 0.015
Ø 1.312
(33.32)
0.032
(0.81)
3/
8
- 32 UNEF - 2A
Ø 0.125 (3.18)
2
0.062 (1.57)
MTG. SURFACE
CW
3
1
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
360° (continuous) 340° ± 5° stops
Bearing Type
Sleeve
STARTING
1.0 oz. - in (72 g - cm)
Torque (maximums)
RUNNING
0.7 oz. - in (50.40 g - cm)
Runouts (maximums)
Shaft Runout (TIR)
0.002" (0.05 mm)
Pilot Dia. Runout (TIR)
0.003" (0.08 mm)
Lateral Runout (TIR)
0.005" (0.13 mm)
Shaft End Play
0.008" (0.20 mm)
Shaft Radial Play
0.003" (0.08 mm)
Weight
1.0 oz. maximum (28.35 g)
Stop Strength
8.0 in - lbs (9.21 kg - cm) (stops version only)
POWER RATING CHART
RATED POWER IN W
6.0
MARKING
5.0
4.0
Unit
Identification
3.0
2.0
Units shall be marked with Vishay Spectrol
name, model number, resistance and
tolerance, linearity, terminal identification, and
data code Applicable test procedures:
MIL-R-39023
Example of a marking for a standard part:
138-2-0-502
1.0
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
Revision: 08-Apr-13
Document Number: 57033
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 157
www.vishay.com
7/
Vishay Spectrol
8"
(22.2 mm) Precision Industrial Potentiometer,
Bushing And Servo Mount Versions, Conductive Plastic
FEATURES
• High quality
• Rugged one piece metal housing
• Long rotational life
• Wide operating temperature range
• Linearities down to ± 0.25 % special
• Optional sealed construction (bushing mount only)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
ROTATIONAL, conductive plastic
Output by turrets
Industrial
7/ " (22.2 mm)
8
ELECTRICAL SPECIFICATIONS
PARAMETER
Resistance
Resistance Tolerance
Special to
Linearity
Special to
Temperature Coefficient of Resistance
Power Rating
Derated to
Electrical Angle
End Voltage
Dielectric Withstanding
Insulation Resistance
Output Smoothness
MIL-PRF-39023 TEST PROCEDURES APPLY
1 k to 100 k
± 20 %
± 10 %
± 2.0 %
± 0.25 %
± 600 ppm/°C
1.0 W at 40 °C ambient
0 W at 125 °C
340° ± 4°
0.5 % maximum
1000 VRMS, 60 Hz
100 M minimum, 500 VDC
0.1 %
MECHANICAL SPECIFICATIONS
PARAMETER
Weight
Rotation
Mount
Bearing Type
0.5 oz. maximum (14 g)
360° (continuous)
BUSHING
Sleeve bearing
Operating Torque
Starting
Running
SERVO
Ball bearing
0.30 oz. - in (21.6 g - cm)
0.25 oz. - in (18 g - cm)
Mechanical Tolerance (in/mm) (maximum)
Shaft Runout (TIR)
Pilot Dia Runout (TIR)
Lateral Runout (TIR)
Shaft End Play
Shaft Radial Play
0.25 oz. - in (18 g - cm)
0.15 oz. - in (10.8 g - cm)
0.002" (0.05 mm)
0.005" (0.13 mm)
0.006" (0.15 mm)
0.003" (0.08 mm)
0.002" (0.05 mm)
0.002" (0.05 mm)
0.002" (0.05 mm)
0.005" (0.13 mm)
0.002" (0.05 mm)
ORDERING INFORMATION/DESCRIPTION
157
B
50K
20 %
C
BO10
MODEL
MOUNTING
OHMIC VALUE
TOLERANCE ON
OHMIC VALUE
LINEARITY
PACKAGING
or 10 %
or 5 %
X: ± 2 %
A: ± 1 %
B: ± 0.5 %
C: ± 0.25 %
Box of 10 pieces
B = Bushing
S = Servo
Revision: 08-Apr-13
Document Number: 57042
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 157
www.vishay.com
Vishay Spectrol
SAP PART NUMBERING GUIDELINES
157
S
502
M
X
B10
MODEL
STYLE
OHMIC VALUE
TOLERANCE ON
OHMIC VALUE
LINEARITY
PACKAGING
502 = 5K
M: ± 20 %
K: ± 10 %
J: ± 5 %
X: ± 2 %
A: ± 1 %
B: ± 0.5 %
C: ± 0.25 %
Box of 10 pieces
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 157B/157-1
± 0.010
0.365
(9.27)
90°
± 0.031
0.875
(22.22)
+ 0.0000
Ø 0.9.52 x 1.57 WIDE
IMPERFECT
THREAD AREA
TERM 1
Ø 0.2497 - 0.0003
(6.34)
0.312
(7.92)
TERM 3
Ø 0.875
(22.2)
TERM 2
0.176 TERMINAL
RADIUS (4.47)
RETAINER: Ø 0.312 x 0.03 MAX.
3/ - 32 UNEF - 2A
8
0.455 ± 0.015
(11.56)
Example of a marking for a standard part:
157-11103
2
LOCATING PIN Ø
0.062 x 0.062
(1.57 x 1.57)
± 0.010
0.125
(3.18)
± 0.015
0.345
(8.76)
0.062 (1.57) RETAINER
Ø 0.20 MAX. x 0.02 MAX. (5.08)
0.062 (1.57)
Ø 0.1248
Ø 0.1245
(3.17)
Ø 0.050
(1.27)
CW
3
1
SCHEMATIC
SERVO MOUNT:
157S/157-2
Ø 0.070
(1.78)
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
Ø 0.750
(19.05)
0.062 (1.57)
0.500 ± 0.031
(12.7)
Ø 0.7500 (19.05)
Ø 0.7495
MATERIAL SPECIFICATIONS
Housing/Bushing
Aluminum, anodized
Rear Lid
Ceramic
Shaft
Stainless steel
Terminals
Bushing Mount Hardware
Solderable
Lockwasher, internal tooth steel, nickel plated
Panel Nut
Brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
Temperature
Rotational Life
Moisture Resistant
Vibration
Shock
- 55 °C + 125 °C
BUSHING
5 million shaft revolutions
SERVO
10 million shaft revolutions
Yes
15 g 10 to 2000 Hz
50 g
Salt Spray
96 h
Load Life
900 h
Revision: 08-Apr-13
Document Number: 57042
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 357
www.vishay.com
Vishay Spectrol
7/ "
8
(22.2 mm) Conductive Plastic
Potentiometer, Bushing Mount Type
FEATURES
• 7/8" diameter single turn
• Compact size, advanced design technology
• Offer a cost effective solution to your
potentiometer requirements
• Suitable model for all industrial applications
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, conductive plastic
Output by turrets
Industrial
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Resistance
Standard range, 1 k to 50 k
STANDARD
± 20 %
STANDARD
± 2.0 %
Tolerance
Linearity (independent)
Output smoothness
TCR
Power rating
Electrical travel
End voltage
Dielectric withstanding voltage
Insulation resistance
SPECIAL TO
± 10 %
SPECIAL
± 1.0 %
0.1 % maximum
± 600 ppm/°C maximum
1.0 W at 70 °C derated to 0 W at 125 °C
340° ± 3°
0.5 % maximum
1000 VRMS, 60 Hz
1000 M, 500 VDC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Mounting
Operating torque maximum
Shaft tolerance maximum
Runout
End play
Radial play
Weight
360° continuous (optional mechanical stops 340° ± 3°)
3/8 - 32 UNEF - 2A
Starting and running 3.68 mNm (0.5 oz. - in)
0.13 mm (0.005")
0.25 mm (0.010")
0.13 mm (0.005")
17.5 g (0.62 oz.)
ORDERING INFORMATION/DESCRIPTION
357
MODEL
B
STYLE
Bushing
Revision: 17-Apr-13
0
FEATURES
0
Non turn pin and
continuous rotation
1
No non turn pin and
continuous rotation
2
Non turn pin, with
stops on rotation
3
No non turn pin
with stops on
rotation
10K
OHMIC
VALUE
20 %
TOLERANCE ON
OHMIC VALUE
A
BO50
LINEARITY PACKAGING
Box of 50
pieces
From 1K
to 50 K
± 10 %
or
± 20 %
X: ± 2 %
A: ± 1 %
0 P 22
SHAFT TYPE
e4
LEAD
FINISH
Shaft diameter
0 = 6.0 mm or
1 = 6.35 mm (1/4")
Shaft type
P = Plain
S = Slotted FMF (from
mounting face)
Range from
12 mm to 75 mm in
1 mm increments
Document Number: 57059
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 357
www.vishay.com
Vishay Spectrol
SAP PART NUMBERING GUIDELINES
357B
2
203
M
X
B25
1S22
MODEL
FEATURES
OHMIC VALUE
TOLERANCE ON OHMIC VALUE
LINEARITY
PACKAGING
SHAFT TYPE
203 = 20K
M: ± 20 %/K: ± 10 %
X: ± 2 %
Box of 50 pieces
DIMENSIONS in millimeters
Ø 6.35 mm SHAFT VERSION
22
9.4
8.8
3 x 3.2
90°
1.5
0.64 ± 0.2
1
3
7.92 ± 0.2
R 4.5
0
Ø 6.345 - 0.05
2
Ø 1.57 ± 0.1
3/8-32 UNEF-2A
1.57
Ø 6.0 mm SHAFT VARIATION: METRIC
IDENTIFICATION LABEL
10.3
2
SIGNAL
3
1
SCHEMATIC
Ø 6 - 00.05
TOLERANCES: LINEAR ± 0.50
ANGULAR ± 2°
ENVIRONMENTAL SPECIFICATIONS
Vibration
Shock
Load Life
Storage temperature range
Life
MARKING
15 g, 10 Hz to 2000 Hz
50 g
1000 h
Unit
Indentification
- 55 °C to + 125 °C
5 000 000 shaft revolutions
Manufacturer’s name and model number,
resistance value and tolerance, linearity
specification date code and terminal
identification.
Example of a marking for a standard part:
357-0-0-1S22-103
Materials
Housing
Thermoplastic housing
Bushing
Brass, nickel plated
Rear lid
Alumina
Shaft
Terminals
RESISTANCE VALUE
Ohms
1K, 2K, 5K, 10K, 20K, 50K
Stainless steel
Turret type, solder plated
Bushing mount hardware
Lockwasher internal tooth
Steel, nickel plated
Panel nut
Brass nickel plated
Revision: 17-Apr-13
Document Number: 57059
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 657
www.vishay.com
Vishay Spectrol
Industrial Rotary Position Sensor
Bushing Mount Type, Conductive Plastic
FEATURES
• Fully sealed for high immunity to environmental damage
• Excellent temperature stability
• Rotational life exceeds 2 million revolutions
• Low cost and wide range of options
• Stainless steel shaft
• Shock to 30 g vibration to 15 g at 10 Hz to 2000 Hz
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
ROTATIONAL, conductive plastic
Output by turrets
Industrial
15.81 mm x 17.46 mm
ELECTRICAL SPECIFICATIONS
PARAMETER
Standard resistance
1 k to 100 k
Capability range
200 k
Resistance tolerance
± 20 %
Linearity
±2%
Power rating
1.0 W at 85 °C
Electrical travel
240° ± 4°
Dielectric withstanding
500 VRMS at 60 Hz minimum
Output smoothness
0.2 % maximum
MECHANICAL SPECIFICATIONS
PARAMETER
Bearing type
Sleeve
Mechanical rotation
250° ± 2°
Stop strength
10 in - lb minimum, 11.5 kg/cm
Starting torque
3.0 o.z - in maximum, 216 g/cm
Running torque
3.0 oz. - in maximum, 216 g/cm
ORDERING INFORMATION/DESCRIPTION
657
MODEL
B
STYLE
B: Bushing
F
SHAFT OPTIONS
R - Round
F - Flatted
0
50 k
B10
SHAFT BUSHING OPTIONS
TOTAL
RESISTANCE
PACKAGING
A
B
C
Shaft length
0 - 0.875" FMS
1 - 0.625" FMS
2 - 1.000" FMS
3 - 1.250" FMS
Bushing length
0.375" FMS
0.250" FMS
0.500" FMS
0.750" FMS
Flat
0.440"
0.315"
0.440"
0.440"
Box of 10
pieces
SAP PART NUMBERING GUIDELINES
657B
MODEL
Revision: 10-Apr-13
R
1
103
BO10
END SHAFT
SHAFT AND
BUSHING OPTIONS
OHMIC VALUE
PACKAGING
R: Round
(see above)
Document Number: 57077
17
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 657
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
+ 0.000
- 0.051
MODEL: 657B/657-...
Ø 0.375 ± 0.002 x 0.030 MAX. WIDE PILOT
(9.53 x 0.76 MAX. WIDE PILOT)
0.500
(12.70)
3/
A
8
- 32 UNEF - 2A
0.625
(15.81)
+ 0.0000
- 0.0003
± 0.031
Ø 0.2497
(6.34 - 0.01)
0.042
0.688
(17.46)
0.375
(9.53)
0.030 MAX.
(0.76)
0.093
(2.36)
0.014
(0.36)
0.143
(3.64)
0.151
(3.84)
0.031
(0.79)
0.035 x 0.075
(0.89 x 1.91)
MINIMUM WIRE OPENING
0.428
(10.87)
2
± 0.015
B
CW
3
1
DECIMALS: XX ± 0.01 INCHES (± 0.25 mm)
XX ± 0.005 INCHES (± 0.13 mm) ANGLES: ± 2°
SCHEMATIC
SHAFT FLAT AND PHASING DIAGRAM
0.216
(5.49)
± 0.015
90°
C
SPECTROL
657-X-X-XXX
XXXX MEX
± 5°
321
WITH SHAFT FLAT POSITIONED AS SHOWN, OUTPUT RATIO
TO BE e/E = 0.50 ± 0.02
STANDARD RESISTANCE VALUES
102
RESISTANCE
()
1K
202
2K
CODE
502
5K
103
10K
203
20K
503
50K
104
100K
ENVIRONMENTAL SPECIFICATIONS
Rotational life
2 million revolutions
Vibration
15 g at 10 Hz to 2000 Hz
Operating temperature
- 40 °C to + 125 °C
Storage temperature
- 55 °C to + 150 °C
Temperature coefficient
Shock
± 600 ppm/°C
30 g
Resistant to solder heat
Moisture resistance IP rating
350 °C for 5 s
Sealed construction
IP67* application to provide
protection for wiring terminals
MATERIAL SPECIFICATIONS
Shaft
Bushing
Housing
Element
Revision: 10-Apr-13
Stainless steel
Nickel plated brass
Thermoplastic
Conductive plastic on alumina
substrate
MARKING
Unit
identification
Vishay Spectrol, part number, data code,
country of origin and terminal designation.
Example of a marking for a standard part:
657-2-0-102
Document Number: 57077
18
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 970-1036
www.vishay.com
Vishay Spectrol
Industrial Sensor for Harsh Environment
(Throttle Position/Through Hole)
FEATURES
• Fully “sealed” robust package
• Electrical connection: AMP superseal 1.5 series integrated
connector
• Through hole D drive
• Mountable on both faces
• Reference index indent
• Return spring option
The model 970 has been specifically developed to operate
and maintain high functional performance under harsh
environmental conditions. These include: extremes of
temperature, continuous vibration, chemical exposure and
water immersion. This universal device is fully sealed to
ingress protection IP67 providing high mechanical durability
and long electrical life. This industrial sensor is suitable for a
different variety of applications within the automotive,
medical and robotic industries.
• Standard electrical resistance (and custom options)
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, conductive plastic
Output type
Connector
Market appliance
Industrial
Dimensions
50.8 mm x 55.3 mm
ELECTRICAL SPECIFICIATONS
PARAMETER
Standard resistance
5 k, ± 20 °C
Resistance tolerance
± 30 %
Linearity (absolute)
±2%
Standard version 200°
continuous rotation version 346°
Electrical angle
Output smoothness
0.5 %
Maximum voltage
30.0 VDC
Temperature coefficient of resistance
600 ppm/°C
MECHANICAL SPECIFICATIONS
PARAMETER
190° with mechanical stops
190 with mechanical stops and return spring
360 continuous
Rotation (options)
Stop strength
680 mNm minimum
Fixed torque (recommended)
2 Nm to 3 Nm
Minimum return 20 Nmm
Maximum wind-up 115 Nmm
Spring torque
Mounting pitch
41 mm
ORDERING INFORMATION/DESCRIPTION
970 - 1036
0000
BO100
MODEL
VERSION
PACKAGING
0000 without spring return
0001 with spring return
0002 continuous rotation
Box of 100 pieces
SAP PART NUMBERING GUIDELINES
970
1036
0000
B30
MODEL
STYLE
CONFIGURATION
PACKAGING
Revision: 03-Jul-12
Document Number: 57001
19
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 970-1036
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
MOUNTING FACE
Ø 8.00 - 8.05
PIN IDE
NUMBER
.0 0
30°
10.7
5.42 - 5.92
50.8
17.9
3.0
LABEL PART NO
DATA CODE
13.8
5.1 - 5.55
25.3
1.2
INDEX SLOT ON
BOTH FACES
Ø
41
40°
SECTION A - A
“D” DRIVE FEATURE
20.3
DIRECTION OF
ROTATION (D.O.R)
55.3
PROVIDES MATING HALF TO
AMP SUPERSEAL 1.5 SERIES
CONNECTOR
± 0.05
3.00
+ 0.00
6.14 - 0.07
(“D” DRIVE)
1.20
10.80
+ 0.20
7.00
25.8
4.0
2.20 ± 0.05
4.4
2.00
ANGLE “A”
19.00
MOUNTING FACE “A”
2.0
10.0
SEE DETAIL Z
22.80
16.0
ENVIRONMENTAL SPECIFICATIONS
PARAMETER
Vibration
Shock
Rotational life
Load life
Temperature range
Sealing
15 g thru 2000 Hz
50 g
5 000 000 full cycles
10 000 000 dither cycles (second rotation)
900 h
- 40 °C to + 130 °C
IP67
Humidity
96 % at 40 °C (500 h)
Salt spray
5 % solution at 40 °C (300 h)
MARKING
Unit identification
Revision: 03-Jul-12
Manufacturer’s name and model number, resistance value, tolerance, data code and terminal identification
Document Number: 57001
20
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 971
www.vishay.com
Vishay Spectrol
Throttle Position Sensor with
Integrated Spring Return System
FEATURES
• High performance, compact potentiometric sensor
• Rugged construction, suitable for under-bonnet engine
management and closed loop feedback applications
• Through-hole actuation capability
• Output type: flying leads
• Actuator and mounting configuration options
Spectrol model 971 series rotary position sensors are
suitable for demanding environments where high life and
consistant linearity performance is required. Typical
applications include electrical industrial vehicles. Off-road
vehicle steering and transmission, automotive engine
management systems, and controls.
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, conductive plastic
Output type
Flying leads
Market appliance
Dimensions
Industrial
43 mm x 32 mm x 14 mm
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance
5 k at + 25 °C
Resistance tolerance
± 20 %
Linearity (independent)
±2%
Electrical travel
106°
Maximum power rating
1 W at 40 °C derated to zero at 135 °C
Output smoothness
0.3 % max.
Temperature coefficient
± 600 ppm/°C
Index point (e/E)
3%±2%
Maximum voltage
13.5 VDC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
130° ± 5° CCW
Spring torque
120 mNm max.
Stop strength
680 mNm min.
End play
0.25 mm max.
Lead wires
Nominal Ø 1.8 mm length optional
Wire pull strength
10 kg max. (3 wires)
ORDERING INFORMATION/DESCRIPTION
971
0002
BO100
MODEL
OUTPUT TYPE
PACKAGING
0002: Flying leads
Box of 100 pieces
971
0002
B30
MODEL
STYLE
PACKAGING
SAP PART NUMBERING GUIDELINES
Revision: 14-Nov-12
Document Number: 57002
21
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 971
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
1.5
32.0 NOM. MIN.
14
D - DRIVE IN ANY
ORIENTATION
Ø 20 NOM. MAX.
Ø 14 NOM. MIN.
18
32
6.10
+ 0.06
ALTERNATIVE
RADIAL SLOTS
AND FIXING HOLE
INSERTS
3
2
1
Ø 6.5 NOM. MAX.
Ø 4.25 NOM. MIN.
FLYING LEADS
43.0 NOM. MIN.
ENVIRONMENTAL SPECIFICATIONS
Rotational life
5 x 106 full cycles
Dither
10 x 106 (2° rotation)
Vibration
15 g, 50 to 1000 Hz
Shock
Temperature range:
Standard operating
Materials: housing
Leads:
Standard PVC
Revision: 14-Nov-12
50 g
- 40 °C to + 85 °C
Polyester PBT
+ 85 °C
Document Number: 57002
22
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ECO
www.vishay.com
Vishay Sfernice
Precision Rotative Transducers,
Conductive Plastic, Economic Series (ECO)
FEATURES
• Size 05 - 09 - 13 are available
• Long life up to 30 million cycles
RoHS
• Accuracy ± 1 % down to ± 0.25 %
COMPLIANT
• Bush or servo mounting types
• Rear mounted terminals
• Following MIL-R-39023 and NFC 93-255 requirements
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, conductive plastic
The “ECO” models are a comprehensive range of rational
motion transducers for industrial applications.
Output type
Output by turrets
All mechanical and electrical parameters can be adapted to
meet your specifications.
Dimensions
SIZE
MODEL
05
50 ES
Market appliance
Industrial
Various sizes
09
50 CB
78 ES
13
78 CS
78 CB
156 ES
156 CS
156 CB
ELECTRICAL SPECIFICATIONS
Theoretical electrical angle (TEA)
Actual electrical angle (AEA) - 2°
Independent linearity (over TEA)
A±1%
(standard)
B  ± 0.5 %
(special)
C  ± 0.25 %
(special)
Actual electrical angle (AEA)
330° ± 5°
340° ± 5°
350° ± 5°
Ohmic values (RT)
Ohmic value tolerances at 20 °C
1 k - 5 k - 10 k - on request other values
± 10 %
± 20 %
± 10 %
± 20 %
Maximum power rating at 70 °C
0.2 W
± 20 %
0.3 W
Wiper current
0.5 W
Recommended: a few μA - 1 mA max. (continuous)
Tap (current or voltage)
NA
1 (on request)
Minimum 103 x RT
Resistance load on wiper
End voltage
± 10 %
 0.05 %
Output smoothness
 0.2 %
 0.5 %
 0.2 %
 0.5 %
 0.2 %
 0.5 %
1000 M, 500 VDC
Insulation resistance
 500 VRMS, 50 Hz
Dielectric strength
MECHANICAL SPECIFICATIONS
Mechanical angle (MA)
360° continuous
On request: stops
NA
340° ± 3°
Mounting type
Servo
Bushing
Shaft guiding
Ball
bearings
Sleeve
bearings
Bushing
Ball
bearings
Shaft
Sleeve
bearings
Precious metal multi-finger contact
 0.2
 0.5
 0.2
 0.5
Torque on stops (N.cm)
Revision: 02-Aug-12
Sleeve
bearings
Turrets
Wiper
Moment of inertia (g cm2)
Bushing
Ball
bearings
Plastic moulding
Termination
Weight (g)
Servo
Stainless steel
Housing
Starting torque (N.cm)
350° ± 3°
Servo
 0.2
 0.5
50
5±2
8±2
 0.5
13 ± 2
17 ± 2
1
29 ± 2
34 ± 2
2
Document Number: 54007
23
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ECO
www.vishay.com
Vishay Sfernice
PERFORMANCE
Life (106 cycles)
30 (on ES models)
20 (on CS and CB models)
Temperature range
- 55 °C to + 125 °C
Climatic category
55/125/04
Speed rotation (RPM)
600 (on ES models)
Sine vibration on 3 axes
150 (on CS and CB models)
1.5 mm or 20 g from 10 Hz to 2000 Hz
Mechanical shocks on 3 axes
50 g - 11 ms - half sine
DIMENSIONS in millimeters, general tolerance ± 0.5 mm
T
0.05
G
SIZE 05/09/13
0.05
X
H
X
SERVO MOUNT TYPE
-0
50 ES
78 ES
78 CS
156 ES
156 CS
Ø 3.175 - 0.013
+0
ØA
Ø C - 0.025
0.4 x 45
X
Ø D MAX.
F
12 7 ± 0.8
DIMENSIONS
ØA
B
ØC
Ø D max.
F
G
H
I max.
DESIGNATION
Ø housing
Length
Ø pilot
Ø groove
Flange thickness
Shoulder
Dia. of groove
Height of the turret
SIZE 05
50 ES
12.7
13.0
9.525
11.45
1 ± 0.1
1.2 ± 0.1
1.2 ± 0.2
2.5
B
I
SIZE 09
78 ES
SIZE 13
78 CS
156 ES
22.2
13.5
19.05
19.64
156 CS
33.3
18.0
30.16
30.9
1.6 ± 0.1
1.6 ± 0.1
1.5 min.
2.5
3.6
10.3 ± 0.13
-0
Ø 3.175 - 0.013
SIZE 05/09/13
BUSHING MOUNT TYPE
50 CB
78 CB
156 CB
Ø 9.52
x 0.79
ØA
Ø 5.1 MAX.
0.4 x 45
1
1.6
9.6 MAX.
22.2 MAX.
DIMENSIONS
ØA
B max.
C max.
DESIGNATION
Ø housing
Length
Height of the turret
Revision: 02-Aug-12
SIZE 05
50 CB
12.7
11
2.5
B MAX. C
SIZE 09
78 CB
22.2
11.5
2.5
SIZE 13
156 CB
33.3
16
3.6
Document Number: 54007
24
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ECO
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 0.5 mm
SIZE 13
SIZE 09
SIZE 05
45° ±
45°
°
45°
±5
°
±5
°
R = 3.7
1
2
3
45° ± 5
5°
1
3
3
1
CW
2
2
R = 4.8
R = 4.8
4
R = 11
4 INTERMEDIATE TAP
ON REQUEST
45°
45
°
±5
°±
1
3.5 MAX.
5°
3
4
INTERMEDIATE TAP
ON REQUEST
2
ORDERING INFORMATION/DESCRIPTION
ECO
78
E
S
A
T
103
e4
SERIES
MODEL
TYPE
FIXATION
LINEARITY
CODE
TAP
OHMIC VALUE
LEAD FINISH
On request
T: Voltage
U: Current
position to
be specified
First 2 digits are
significant
numbers 3rd digit
indicates number
of zeros
E = Ball bearings
C = Sleeve bearings
S: Servo
B: Bushing
A: ± 1 %
B: ± 0.5 %
C: ± 0.25 %
Special characteristics and designs on request
SAP PART NUMBERING GUIDELINES
ECO
78CB
C
502
SERIES
MODEL
LINEARITY
OHMIC VALUE
Revision: 02-Aug-12
Document Number: 54007
25
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ECS
www.vishay.com
Vishay Sfernice
Precision Rotative Transducers,
Conductive Plastic, Economic Series (ECS)
FEATURES
•
•
•
•
•
•
Size 09: (7/8") 22.2 mm
Long life: 5 million cycles
Bush or servo mounting types available
Rear comolded terminals
Cost effective solution for any industrial applications
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Low cost industrial motion transducers, conductive plastic
track.
SIZE
MODEL
09
78 RS
78 RB
Sensor type
ROTATIONAL, conductive plastic
Output type
Output by turrets
Market appliance
Dimensions
78 PS
Industrial
22.2 mm (7/8 ") dia.
78 PB
ELECTRICAL SPECIFICATIONS
Theoretical electrical angle (TEA)
Independent linearity (over TEA)
Actual electrical angle (AEA)
Ohmic values (RT)
Ohmic value tolerances at 20 °C
Output smoothness
Maximum power rating at 70 °C
Wiper current
Tap (current or voltage)
Resistance load on wiper
End voltage
Insulation resistance
Dielectric strength
(AEA) - 3°
A  ± 1 %, on request: B  ± 0.5 % C  ± 0.35 %
A±2%
340° ± 5°
1 k - 2 k - 5 k - 10 k (on request other values)
1 k - 2 k - 5 k - 10 k
Standard: ± 20 %/special: ± 10 %
± 20 %
0.1 %
0.3 W
Recommended: a few μA - 1 mA max. (continuous)
1: On request
NA
 1000 x RT
 0.5 % DC
 1000 M, 500 VDC
 500 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical angle (MA)
On request: stops
Mounting type
Shaft guiding
Shaft
Option: flat or screw driver slot on shaft
Termination
Wiper
Starting torque (N.cm)
Torque on stops (N.cm)
Weight (g)
360° continuous
342° ± 5°
Bushing
Servo
Sleeve bearings
Stainless steel
Servo
Bushing
On request
NA
Turrets
Precious metal multi-finger contact
 0.5
 20
Bushing 17 g ± 3 g
Servo 12 g ± 3 g
PERFORMANCE
Life (106 cycles)
Temperature range
Climatic category
Speed rotation (RPM)
Sine vibration on 3 axes
Mechanical shocks on 3 axes
Revision: 17-Sep-12
5
- 55 °C to + 125 °C
55/125/04
150
15 g from 10 Hz to 2000 Hz
50 g - 11 ms - half sine
Document Number: 54008
26
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ECS
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 0.5 mm
SIZE 09
SIZE 09
78 PB
78 RB
78 PS
78 RS
12.4 ± 0.4
2.5 max.
7.92 ± 0.13
Ø 1.6 ± 0.1
× 1.6
Ø 9.52
± 0.1 (1)
(2)
Ø 9.52 × 0.79
- 32 NEF - 2A
3/
8
Ø 19.8
MAX.
Ø 6.35
Ø 22.2 ± 0.13
12.7 ± 0.8
+ 0.1
- 0.1
+0
Ø 3.175 - 0.013
Ø 8 MAX.
7 MIN.
+0
Ø 19.05 - 0.05
+ 0.1
1.6 - 0.1
Ø 22.2 ± 0.13
+ 0.1
1.6 - 0.1
9.3 ± 0.25
8
2.5 MAX.
22.2 ± 0.8
1.5 MIN.
8 ± 0.4
Notes
(1) On request: Ø 10.3 mm or 12.3 mm
(2) On request: Without antirotation pin
REAR VIEW DIMENSIONS in millimeters, general tolerance 0.5 mm
SIZE 09
SPECIAL
(4 TURRETS)
INTERMEDIATE TAP ON REQUEST
STANDARD
3 TURRETS
90°
90°
3.7 MAX.
2
Ø 9.6
Ø 1.6
Ø 8.6
1
1 3
2
3
4
General Tolerance ± 0.5 mm
ORDERING INFORMATION/DESCRIPTION
ECS
78
P
S
M
A
T
103
e4
SERIES
MODEL
TYPE
FIXATION
MECHANICAL
STOPS
LINEARITY
TAP
OHMIC VALUE
LEAD FINISH
P
S: Servo
On request
A: ± 1% or ± 2 %
On request
102: 1 k
R
B: Bushing
M
B: ± 0.5 %
T: Voltage
202: 2 k
C: ± 0.35 %
U: Current
502: 5 k
position to
103: 10 k
be specified
SAP PART NUMBERING GUIDELINES
ECS
78RB
B
102
SERIES
MODEL
LINEARITY
OHMIC VALUE
Revision: 17-Sep-12
Document Number: 54008
27
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series KIT RMF
www.vishay.com
Vishay Sfernice
Conductive Plastic Rotative Transducer Elements (KIT)
FEATURES
• Reduced dimensions and weight
• Cost effective solution
• Easy mounting
• Model dedicated to custom design requirements
It is made of 2 parts:
• A sensing element in a housing
The RMF is a precision rotative motion transducer designed
for easy mounting into your equipment.
• A wiper
On request, their shapes and sizes can be custom-designed
to fit your equipment.
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, conductive plastic
Output type
Market appliance
Dimensions
Various
Industrial
Various sizes
ELECTRICAL SPECIFICATIONS
Theoretical electrical angle (TEA = E)
Independent linearity
Over TEA
On request (depending on size)
Actual electrical angle (AEA)
Total resistance RT
On request
Total resistance tolerance at 20 °C
AEA - 2°
A  ± 1 %; B  ± 0.5 %
C  ± 0.25 %; D  ± 0.1 %
down to E  ± 0.05 %
340 ± 3° or 350 ± 2° according to the model
1 k, 2 k, 5 k, 10 k
other values
± 20 %
Repeatability
< 0.01 %
Wiper current
1 mA max. continuous, recommended: a few μA
Loadimpedance
1000 times RT minimum
Insulation resistance
> 1000 M 500 VDC
Dielectric strength
> 500 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical angle MA
Substrate
Termination
On request
Wiper
360° continuous
Thermosetting resin
Turrets
wires, cables
Multi-finger precious metal alloy
PERFORMANCE
Life
25 million cycles typical
Temperature limits
Revision: 04-Jul-12
- 30 °C at + 85 °C
Document Number: 54003
28
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series KIT RMF
www.vishay.com
Vishay Sfernice
EXAMPLES OF SPECIAL DESIGNS
ORDERING INFORMATION/DESCRIPTION
KIT
RM
F
116
D
103
SERIES
MODEL
TYPE
SIZE
LINEARITY
RESISTANCE
A:  ± 1 %
B:  ± 0.5 %
C:  ± 0.25 %
D:  ± 0.1 %
E:  ± 0.05 %
First 2 digits are
significant numbers
3rd indicates number of
zeros
F: Plastic
S: Serigraphy
SAP PART NUMBERING GUIDELINES
RMS
200
A
502
MODEL
SIZE
LINEARITY
OHMIC VALUE
Revision: 04-Jul-12
Document Number: 54003
29
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 128
www.vishay.com
Vishay Spectrol
1 1/16" (27 mm) Single Turn Conductive Plastic
Precision Potentiometer
FEATURES
• 1 1/16" round
• Bushing mount and servo mount types
• Designed for high reliability applications
• Ohmic value range: 500  to 50 k
• Rotational life exceeds 20 million shaft revolutions
• Virtually infinite resolution
• Up to 6 sections available
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
• Co-molded track and multi-finger wiper provide low noise
signal
ROTATIONAL, conductive plastic
Output by turrets
Professional
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
1 1/16" (27 mm)
Dimensions
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
500  to 50 k
Total Resistance
Tolerance
± 10 %
±5%
Linearity (independent)
± 0.5 %
± 0.15 %
Electrical Angle
345° ± 4°
Power Rating
Section 1:
1.25 W at 70 °C ambient, derated to zero at 125 °C ambient
Additional Section:
75 % of the rating of section 1
Output Smoothness
0.1 % maximum
Insulation Resistance
1000 M minimum, 500 VDC
Dielectric Strength
1000 VRMS, 60 Hz
Phasing (CCW End Points)
Points at which output ratio is 0.5 aligned ± 1° (ref. section 1)
Temperature Coefficient of Resistance
± 600 ppm/°C maximum
Taps (extra)
Extra taps available as special
ORDERING INFORMATION/DESCRIPTION
The Model 128 can be ordered from this datasheet with a variety of alternate characteristics, as shown above. For most rapid service on
your order, please state:
128
S
1
1K
BO1
MODEL
MOUNTING
NUMBER OF SECTIONS
TOTAL RESISTANCE OF EACH SECTION
PACKAGING
B: Bushing
S: Servo
Up to 6
Beginning with the section nearest the
mounting end
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
128
S
3
103
102
203
B01
MODEL
STYLE
GANGS
OHMIC VALUE
GANG N° 1
OHMIC VALUE
GANG N° 2
OHMIC VALUE
GANG N° 3
PACKAGING
B: Bushing
S: Servo
From 1 up to 6
10K
1K
20K
Box of 1 piece
Revision: 05-Apr-13
Document Number: 57037
30
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 128
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 128B/128-1...
± 0.010
0.687
(17.45)
1
± 0.031
0.875
(22.22)
0.375
(9.52)
± 0.015
3
0.308 MIN.
(7.82)
30°
TYP.
+ 0.0000
0.062
(1.57)
2
Ø 0.4062
(10.32)
Ø 1.062
(26.97)
1
Ø 0.1248 - 0.0003
(3.17)
+ 0.0000
- 0.0010
± 0.015
3/
MTG. FACE
8
32 UNEF - 2A
R 0.735 MAX.
(18.67)
SERVO MOUNT: 128S/128-2...
± 0.031
0.308 MIN.
(7.82)
0.500
(12.70)
0.062
(1.57)
0.062
(1.57)
0.062
(1.57)
+ 0.0000
Ø 0.9688 - 0.0005
(24.61)
1
ADD 0.782 ± 0.002 (19.86) FOR EACH
ADDITIONAL SECTION
2
Ø 1.062
(26.97)
CW
± 0.015
Ø 1.062
(26.97)
SCHEMATIC
+ 0.0000
0.1248 - 0.0003
Ø
(3.17)
Ø 0.968 MAX.
(24.58)
3
1
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
MTG. FACE
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing Type
Torque (maximum)
Servo, 1 Section
Bushing, 1 Section
Each Additional Section
Mechanical Runouts (maximum)
Shaft Runout (TIR/in)
Pilot Dia. Runout (TIR/in)
Lateral Runout (TIR)
Shaft End Play
Shaft Radial Play
Weight (maximum):
Single Section
Each Additional Section
Ganging
Moment of Inertia
Revision: 05-Apr-13
360° continuous
SERVO MOUNT
Ball bearing
BUSHING MOUNT
Sleeve bearing
STARTING
0.25 oz. - in (18.0 g - cm)
0.30 oz. - in (21.6 g - cm)
0.20 oz. - in (14.4 g - cm)
RUNNING
0.15 o.z - in (10.8 g - cm)
0.25 oz. - in (18.0 g - cm)
0.15 oz. - in (10.8 g - cm)
SERVO
0.002" (0.05 mm)
0.002" (0.05 mm)
0.002" (0.05 mm)
0.005" (0.13 mm)
0.002" (0.05 mm)
BUSHING
0.002" (0.05 mm)
0.002" (0.05 mm)
0.005" (0.13 mm)
0.005" (0.13 mm)
0.003" (0.08 mm)
0.8 oz. (22.7 g)
0.4 oz. (11.3 g)
6 sections maximum, terminal alignment, added sections, within ± 10° of section 1 terminals
0.12 g - cm2 per section maximum
Document Number: 57037
31
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 128
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing and Lids
Vibration
Aluminum, anodized
Shaft
Stainless steel, non-magnetic
non-passivated
Terminals
Brass plated for solderability
15 g thru 2000 Hz
Shock
50 g
Salt Spray
96 h
Rotational Life
Bushing Mount Hardware
Lockwasher Internal Tooth:
Panel Nut:
Steel, nickel plated
Brass, nickel plated
Servo: 20 million shaft revolutions
Bushing: 5 million shaft revolutions
Load Life
900 h
Temperature Range
- 55 °C to + 125 °C
MECHANICAL SPECIFICATIONS
Units shall be marked with Vishay Spectrol name, model number and data code on each
section, resistance, resistance tolerance, linearity and terminal identification.
Example of a marking for a standard part: 128-11103
Unit
Identification
POWER RATING CHART
RESISTANCE ELEMENT DATA
RATED POWER IN W
(Ratings for cup No. 1.
Additional cups 75 % of values shown)
RESISTANCE
VALUES
()
MAXIMUM VOLTAGE
APPLICABLE
(V)
500
25
1K
35
2K
50
5K
79
10K
112
20K
158
50K
250
2.0
1.5
1.0
0.5
0
20
40
60
80
100
120 140
AMBIENT TEMPERATURE IN °C
Revision: 05-Apr-13
160
Document Number: 57037
32
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 208
www.vishay.com
Vishay Spectrol
1 3/4" (44.5 mm) Single Turn Conductive Plastic
Precision Potentiometer
FEATURES
• Rotational life
revolutions
exceeds
20
million
shaft
• Virtually infinite resolution
• Designed for high reliability applications
• Co-molded track and multi-finger wiper provide low noise
signal
• Bushing or servo types available up to 6 sections
QUICK REFERENCE DATA
• Ohmic value range: 1 k to 50 k
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, conductive plastic
Output by turrets
Professional
Dimensions
1 ¾" (44.5 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance
tolerance
Linearity (independent)
STANDARD
1 k to 50 k
± 10 %
SPECIAL
±5%
STANDARD
± 0.3 %
SPECIAL
± 0.1 %
Electrical angle
350° ± 3°
Power rating:
Section 1:
Additional sections
1.75 W at 70 °C ambient derated to zero at 125 °C
75 % of the rating of section 1
Output smoothness
0.1 % maximum
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Taps (extra)
Extra taps available as special
Phasing
Points at which output ratio is 0.5 aligned ± 1° (ref. to section 1)
Temperature coefficient of resistance
± 600 ppm/°C maximum
ORDERING INFORMATION/DESCRIPTION
The Model 208 can be ordered from this datasheet with a variety of alternate characteristics, as shown above. For most rapid service on
your order, please state:
208
B
1
10K
BO1
MODEL
MOUNTING
NUMBER OF SECTIONS
TOTAL RESISTANCE OF EACH SECTION
PACKAGING
B: Bushing
S: Servo
Up to 6
Beginning with the section nearest
the mounting end
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
208
S
2
103
502
B01
MODEL
STYLE
GANG NUMBERS
OHMIC VALUE
GANG N° 1
OHMIC VALUE
GANG N° 2
PACKAGING
B: Bushing
S: Servo
From 1 up to 6
10K
5K
Revision: 09-Apr-13
Document Number: 57053
33
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 208
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
SERVO MOUNT: 208S/208-2
± 0.010
± 0.031
0.831
(21.10)
1
0.625
(15.88)
0.340 MIN.
(8.64)
16° 20°
TYP.
0.073 MIN.
(1.85)
3
1
2
± 5°
45°
0.093
(2.36)
1.075 R MAX.
(27.30)
± 0.015
Ø 1.750
(44.45)
Ø 1.750
(44.45)
Ø 1.562
MAX.
(39.67)
+ 0.0000
Ø 1.5620 - 0.0005
(39.67)
0.062
(1.57)
+ 0.0000
Ø 0.2497 - 0.0003
(6.34)
MTG. FACE
1.015 R MAX.
(25.78)
1
± 0.010
0.705
(17.91)
± 0.031
0.875
(22.22)
0.239 MIN.
(6.07)
0.062
(1.57)
± 0.015
0.375
(9.52)
3/
8
- 32 UNEF - 2A
BUSHING MOUNT: 208B/208-1
+ 0.0000
Ø 0.2497 - 0.0003
(6.34)
± 0.015
Ø 0.4062
(10.32)
0.010
(0.25)
1
+ 0.0000
- 0.0010
Ø 1.000
(25.40)
Ø 1.750
(44.45)
MTG. FACE
2
ADD 0.500 ± 0.002 (12.70) FOR EACH
ADDITIONAL SECTION
CW
3
1
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing type
Ganging
Torque (maximums)
Servo section 1
Bushing section 1
Each additional section
Mechanical runouts (maximums):
Shaft (TIR/in)
Pilot dia. (TIR)
Lateral (TIR)
Shaft end play
Shaft radial play
Moment of inertia
Weight:
Single section
Each additional section
Revision: 09-Apr-13
360° continuous
SERVO MOUNT
BUSHING MOUNT
Ball bearing
Sleeve bearing
6 sections maximum terminal alignment, added
sections within ± 10° of section 1 terminals
RUNNING
STARTING
0.4 oz. - in (28.80 g - cm)
0.7 oz. - in (50.40 g - cm)
0.7 oz. - in (50.40 g - cm)
1.0 oz. - in (72.0 g - cm)
0.3 oz. - in (21.60 g - cm)
0.4 oz. - in (28.80 g - cm)
BUSHING
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
0.002" (0.05 cm)
1.0 g - cm2 per section maximum
3.0 oz. (85.05 g)
1.0 oz. (28.35 g)
Document Number: 57053
34
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 208
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing and lids
Vibration
Aluminium, anodized
Shaft and clamp rings
Stainless steel, non-magnetic
non-passivated
Terminals
Brass, plated for solderability
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
15 g thru 2000 Hz
Shock
50 g
Salt Spray
96 h
Steel, nickel plated
Brass, nickel plated
Servo: 20 million shaft revolutions
Bushing: 5 million shaft revolutions
Rotational life
MARKING
Load life
Units shall be marked with Spectrol name,
model number and data code on each
section, resistance, resistance tolerance,
linearity and terminal identification.
Example of a marking for a standard part:
208-12502 103
Unit
identification
900 h
Operating temperature
range
- 55 °C to + 125 °C
RESISTANCE ELEMENT DATA
POWER RATING CHART
RATED POWER IN W
(Ratings for cup No. 1.
Additional cups 75 % of values shown)
3.0
RESISTANCE
VALUES
()
MAXIMUM VOLTAGE
APPLICABLE
(V)
1K
42
2K
59
5K
94
10K
132
20K
187
50K
299
2.5
2.0
1.5
1.0
0.5
0
20
40
60
80
100
120
140 160
AMBIENT TEMPERATURE IN °C
Revision: 09-Apr-13
Document Number: 57053
35
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 308
www.vishay.com
Vishay Spectrol
2" (50.8 mm) Single Turn Conductive Plastic
Precision Potentiometer
FEATURES
•
•
•
•
Bushing mount and servo mount types available
Virtually infinite resolution
Up to 6 sections available
Rotational life exceeds 20 million shaft
revolutions
• Co-molded track and multi-finger wiper provide low noise
signal
• Large ohmic value range: 500  to 100 k
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, conductive plastic
Output type
Output by turrets
Market appliance
Professional
Dimensions
2" (50.8 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
500  to 100 k
Total resistance standard range
Tolerance
STANDARD
± 10 %
SPECIAL
±5%
Linearity (independent)
STANDARD
± 0.25 %
SPECIAL
± 0.05 %
Electrical angle
350° ± 2°
Power rating
Section 1
Additional sections
2.0 W at 70 °C ambient derated to zero at 125 °C (400 VDC maximum)
75 % of the rating of section 1
Output smoothness
0.1 % maximum
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Taps (extra)
Extra taps available as special
Phasing
Points at which output ratio is 0.5 aligned ± 1° (ref. to section 1)
Temperature coefficient of resistance
± 600 ppm/°C maximum
ORDERING INFORMATION/DESCRIPTION
The Model 308 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
308
B
1
20K
BO1
MODEL
MOUNTING
NUMBER OF SECTIONS
TOTAL RESISTANCE OF EACH SECTION
PACKAGING
B: Bushing
S: Servo
Up to 6
Beginning with the section nearest the mounting end
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
308
MODEL
Revision: 09-Apr-13
S
1
203
B01
STYLE
GANG NUMBER
OHMIC VALUE GANG NO 1
PACKAGING
B: Bushing
S: Servo
From 1 up to 6
20K
Document Number: 57058
36
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 308
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
SERVO MOUNT: 308S/308-2
± 0.010
± 0.031
0.831
(21.10)
1
0.625
(15.88)
0.340 MIN.
(8.64)
15° TYP.
3
1
2
± 5°
45°
0.073 MIN.
(1.85)
0.093
(2.36)
1.200 R MAX.
(30.48)
+ 0.0000
± 0.015
Ø 1.8750 - 0.0005
(47.62)
Ø 2.000
(50.80)
Ø 1.812
MAX.
(46.02)
Ø 2.000
(50.80)
0.062
(1.57)
MTG. FACE
+ 0.0000
Ø 0.2497 - 0.0003
(6.34)
1.140 R MAX.
(28.96)
BUSHING MOUNT: 308B/308-1
± 0.015
1
± 0.031
0.875
(22.22)
0.705
(17.91)
± 0.010
0.375
(9.52)
0.239 MIN.
(6.07)
Ø 0.2497
(6.34)
+ 0.0000
- 0.0003
0.062
(1.57)
+ 0.0000
- 0.0010
Ø 0.4062
(10.32)
2
± 0.015
Ø 2.000
(50.80)
CW
3
1
SCHEMATIC
1
± 0.015
Ø 1.375
(34.92)
0.010
(0.25)
3/
8
- 32 UNEF - 2A
MTG. FACE
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
ADD 0.500 ± 0.002 (12.70) FOR EACH
ADDITIONAL SECTION
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
360° (continuous)
Bearing type
Servo mount:
Bushing mount:
Ganging
Torque (maximums)
Mounting
Servo, 1 section
Bushing, 1 section
Each additional section
Runouts (maximums)
Shaft (TIR/in)
Pilot dia. (TIR)
Lateral (TIR)
Shaft end Play
Shaft Radial play
Moment of inertia
Weight
Single section
Each additional section
Revision: 09-Apr-13
Ball bearing
Sleeve bearing
6 sections maximum. Terminal alignment, added sections, within ± 10° of section 1 terminals
STARTING
1.0 oz. - in (72.00 g - cm)
1.7 oz. - in (122.40 g - cm)
0.6 oz. - in (43.20 g - cm)
RUNNING
0.5 oz. - in (36.00 g - cm)
1.0 oz. - in (72.00 g - cm)
0.4 oz. - in (28.80 g - cm)
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
2.0 g - cm2 per section maximum
4.0 oz. (127.57 g)
1.2 oz. (34.02 g)
Document Number: 57058
37
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 308
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing and lids
Vibration
Aluminum, anodized
Stainless steel, non-magnetic
non-passivated
Shaft and clamp rings
Terminals
Brass, gold plated for solderability
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
Steel, nickel plated
Brass, nickel plated
MARKING
POWER RATING CHART
(Ratings for cup No. 1. Additional cups 75 % of values
shown)
RATED POWER IN W
50 g
Salt spray
96 h
Rotational life
Servo: 20 million shaft revolutions
Bushing: 5 million shaft revolutions
Load life
900 h
Temperature range
- 55 °C to + 125 °C
RESISITANCE ELEMENT DATA
Units shall be marked with Spectrol name,
model no, and data code, and on each section,
resistance, resistance tolerance, linearity and
terminal identification.
Example of a marking for a standard part:
308-21503
Unit
identification
15 g thru 2000 Hz
Shock
4
RESISTANCE
VALUES
()
MAXIMUM VOLTAGE
APPLICABLE
(V)
500
1K
2K
5K
10K
20K
50K
100K
32
45
71
100
141
224
316
350 (1)
Note
(1) Maximum voltage allowable
3
2
1
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
Revision: 09-Apr-13
Document Number: 57058
38
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 708
www.vishay.com
7/
8"
Vishay Spectrol
(22.2 mm) Single Turn Conductive Plastic
Precision Potentiometer
FEATURES
• Virtually infinite resolution
• Bushing mount and servo mount types
available
• Rotational life exceeds 20 million shaft revolutions
• Co-molded track and multi-finger wiper provide low noise
signal
• Ohmic value range: 500  to 50 k
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, conductive plastic
Output by turrets
Professional
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
500  to 50 k
Total resistance standard range
Tolerance
STANDARD
± 10 %
SPECIAL
±5%
Linearity (independent)
STANDARD
± 0.5 %
SPECIAL
± 0.2 %
Electrical angle
340° ± 5°
Power Rating
Section 1:
Additional sections:
1.0 W at 70° ambient derated to zero at 125 °C
75 % of the rating of section 1
Output smoothness
0.1 % maximum
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS , 60 Hz from terminals to shaft
Taps (extra)
Extra taps available as special
Points at which output is 0.5 aligned
± 1° (ref. to section 1)
Phasing
Temperature coefficient of resistance
± 600 ppm/°C maximum
ORDERING INFORMATION/DESCRIPTION
The Model 708 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
708
B
1
10K
BO1
MODEL
MOUNTING
NUMBER OF SECTIONS
TOTAL RESISTANCE OF EACH SECTION
PACKAGING
B: Bushing
S: Servo
Up to 6
Beginning with the section nearest the
mounting end
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
708
MODEL
Revision: 10-Apr-13
S
2
102
103
B01
STYLE
GANGS
OHMIC VALUE
GANG No 1
OHMIC VALUE
GANG No 2
PACKAGING
B: Bushing
S: Servo
From 1 up to 6
1K
10K
Document Number: 57070
39
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 708
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 708B/708-1
± 0.010
± 0.031
0.687
(17.45)
1
0.500
(12.70)
3
0.250 ± 0.015
(6.35)
0.308 MIN.
(7.82) TYP.
1
30°
TYP.
2
0.062
(1.57)
3/
8
- 32 UNEF -2A
+ 0.0000
- 0.0010
± 0.015
Ø 0.875
(22.22)
Ø 0.4062
(10.32)
0.640 R MAX.
(16.26)
+ 0.0000
Ø 0.1248 - 0.0003
(3.17)
MTG. FACE
SERVO MOUNT: 708S/708-2
± 0.010
± 0.031
0.687
(17.45)
1
0.500
(12.70)
0.062
(1.57)
0.062
(1.57)
0.062
(1.57)
± 0.015
Ø 0.875
(22.22)
2
+ 0.0000
Ø 0.750
MAX.
(19.05)
Ø 0.7500 - 0.0005
(19.05)
Ø 0.875
(22.22)
CW
3
1
SCHEMATIC
+ 0.0000
Ø 0.1248 - 0.0003
(3.17)
MTG. FACE
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
1
ADD 0.500 ± 0.002 (12.70) FOR EACH
ADDITIONAL SECTION
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
360° continuous
Bearing type
Servo mount:
Bushing mount:
Torque (maximum)
Servo, 1 section
Bushing, 1 section
Each additional section
Runouts (maximum)
Shaft runout (TIR/in)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Weight (maximum)
Single section:
Each additional section:
Ganging
Moment of inertia
Revision: 10-Apr-13
Ball bearing
Sleeve bearing
STARTING
0.10 oz. - in (7.20 g - cm)
0.25 oz. - in (18.00 g - cm)
0.10 oz. - in (7.20 g - cm)
RUNNING
0.085 oz. - in (6.12 g - cm)
0.20 oz. - in (14.40 g - cm)
0.075 oz. - in (5.40 g - cm)
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.004" (0.10 cm)
0.6 oz. (17.0 g)
0.2 oz. (5.67 g)
6 sections max, terminal alignment, added sections within ± 10° of section 1 terminals
0.12 g - cm2 per section maximum
Document Number: 57070
40
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 708
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
Housing and lids
ENVIRONMENTAL SPECIFICATIONS
Aluminum, anodized
Shaft
Stainless steel, non-magnetic
non-passivated
Terminals
Brass plated for solderability
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
Steel, nickel plated
Brass, nickel plated
Vibration
15 g thru 2000 Hz
Shock
50 g
Salt spray
96 h
Rotational life
Load life
Servo: 20 million shaft revolutions
Bushing: 5 million shaft revolutions
900 h
Temperature range
- 55 °C to + 125 °C
MARKING
Units shall be marked with Spectrol name, model no, and data code, and on each section, resistance,
resistance tolerance, linearity and terminal identification.
Example of a marking for a standard part: 708-22102103
Unit identification
POWER RATING CHART
RATED POWER IN W
(Ratings for cup No. 1. Additional cups 75 % of values shown)
2.0
1.5
1.0
0.5
RESISTANCE ELEMENT DATA
RESISTANCE
VALUES
()
MAXIMUM VOLTAGE
APPLICABLE
(V)
500
22
1K
32
2K
45
5K
71
10K
100
20K
141
50K
224
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
Revision: 10-Apr-13
Document Number: 57070
41
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ROT/BF
www.vishay.com
Vishay Sfernice
Precision Rotative Transducers,
Conductive Plastic, Bushing Mounting
FEATURES
• Size 08 to 30
• Linearity ± 1 % down to ± 0.05 %
• Good repeatability
• Long life
• Essentially infinite resolution
• Up to 6 electrical functions with the same shaft
A complete range of bushing mounting rotational motion
transducers.
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
ROTATIONAL, conductive plastic
Output by turrets
Professional
Various sizes
• On request custom design to meet your specifications
• Following MIL-R-39023 and NFC 93-255 requirements
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
Size
Model
Functions
Theoretical electrical angle (TEA)
Independent linearity (over TEA)
Best linearity available
Actual electrical angle (AEA)
Ohmic values (RT)
Ohmic value tolerances at 20 °C
Output smoothness
Maximum power rating at 70 °C
Wiper current
Tap (current or voltage)
On request with angular position to be
specified
Load resistance on wiper (RL)
Repeatability
End voltage
Insulation resistance
Dielectric strength
08
34 BF
09
78 BF
11
13
15
18
20
30
116 BF
156 BF
176 BF
134 BF
200 BF
300 BF
Linear, on request specific law
Actual electrical angle (AEA) - 2°
A±1%
or
B  ± 0.5 %
or
C  ± 0.25 %
C  ± 0.25 %
Down to D  ± 0.1 %
Down to E  ± 0.05 %
340° ± 3°
350° ± 2°
1 k - 2 k - 5 k - 10 k - on request other values
± 10 %
 0.05 %
 0.025 %
0.25 W
0.3 W
0.4 W
0.5 W
0.75 W
1.0 W
1.2 W
1.5 W
Recommended: a few μA - 1 mA max. (continuous)
{ Position: ± 2°
U = current
/ T = voltage Position: ± 2°
{ Width:  4°
min. 103 x RT
 0.02 %
 0.4 % for 470   RT  1000  /  0.2 % for 1000  < RT  2200  /  0.1 % for RT > 2200 
 1000 M, 500 VDC
 750 VRMS, 50 Hz
 1000 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical rotation
Mounting type/shaft guiding
Shaft material/common option
Housing
Termination
Wiper
Starting torque (N.cm)
Moment of Inertia (g. cm2)
Weight (g)
Revision: 07-Oct-13
1 cup
each additional cup
0.3
11 ± 2
5±2
360° continuous; stops on request
Bushing/sleeve bearings; on request ball bearings
Stainless steel/screw driver slot
Plastic molding; on request anodized aluminum
Turrets; on request flexible leads, cables...
Precious metal multi-finger contact
 0.5 1 cup;  0.3 for each additional cup
0.4
0.6
0.8
2.2
2.8
3.5
20 ± 2
21 ± 2
30 ± 2
33 ± 2
45 ± 3
54 ± 3
6±2
7±2
14 ± 2
16 ± 2
18 ± 3
21 ± 3
10
120 ± 10
62 ± 10
Document Number: 54005
42
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ROT/BF
www.vishay.com
Vishay Sfernice
PERFORMANCE
 20
Life (million of cycles)
Temperature range
-55 °C to +125 °C
Climatic category
55/125/04
Rotation speed (RPM)
150
DIMENSIONS in millimeters, general tolerance ± 0.5 mm
H
Ø 9.52 x 0.79
3/8 - 32 NEF2A THD
M
L
L
I
ØA
ELECTRICAL
CONNECTIONS
2
3
1
0.4 x 45
ØC
0.5 x 45°
*
Ø 10.3
CLOCK WISE
VIEWED FROM
SHAFT SIDE
1.6
9.9 MAX.
N
20 MAX.
DELIVERED WITH NUT + WASHER
ØP
Note:
· On Request
DIMENSIONS
O
-0
- 0.02
J
Ø K ON CLAMP
DESIGNATION
SIZE
MODEL
POTENTIOMETER REFERENCE
08
09
11
13
15
18
20
30
34 BF
78 BF
116 BF
156 BF
176 BF
134 BF
200 BF
300 BF
A-0
- 0.013
Ø shaft
3.175
3.175
3.175
3.175
6.345
6.345
6.345
6.345
C max.
Ø body
19.18
22.3
27.07
33.35
36.6
44.5
50.9
76.4
H min.
Turret location
4.2
4.7
5.35
5.35
8
8
7.45
5.55
I max.
Radius on turrets
14
15.4
17.3
20.8
23.1
26.6
29.7
43.7
J max.
Radius on screw clamp
13.5
15.4
17.3
18.9
23.1
26.5
29.3
42.6
K
Ø on clamp
19.6
23.8
27.7
33.6
37.4
44.5
50.8
77.5
O
Locating pin (on request)
7.2
8
8.8
9
14.4
16.8
13.48
-
P max.
Ø pin (on request)
1.6
1.6
3.25
3.25
3.25
3.25
-
-
L ± 2°
Angle between turrets
30°
30°
25°
20°
20°
25°
15°
15°
M max.
Total angle
100°
100°
100°
100°
80°
80°
80°
80°
1 cup
14.5
19
19
19
21
21
21
20.5
2 cups
21.5
25
21.5
24
24.5
24.5
26
23.5
3 cups
34.5
38
34.5
38
37.5
37.5
38
-
4 cups
40.5
48
40.5
45.5
48
48
48
-
5 cups
53
61
53
59
60.5
61
62
-
6 cups
59
72
59
67
72
72
72
-
N max.
Revision: 07-Oct-13
Document Number: 54005
43
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ROT/BF
www.vishay.com
Vishay Sfernice
ORDERING INFORMATION/DESCRIPTION
ROT
156
B
F
1
C
T
502
e1
SERIES
SIZE
MOUNTING TYPE
CONDUCTOR
NUMBER OF CUPS
LINEARITY
TAP
OHMIC VALUE
LEAD FINISH
B: Bushing
F: Plastic film
From 1 up to 6
A: ± 1 %
B: ± 0.5 %
C: ± 0.25 %
D: ± 0.1 %
E: ± 0.05 %
On request First 2 digits are
significant
T: Voltage
numbers 3rd
U: Current
digit indicates
position to
be specified number of zeros
Note
• Special characteristics and designs on request
SAP PART NUMBERING GUIDELINES
RO 116BF
1
D
103
MODEL
GANG NUMBER
LINEARITY
OHMIC VALUE
From 1 up to 6
Revision: 07-Oct-13
10 k
Document Number: 54005
44
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ROT/SF
www.vishay.com
Vishay Sfernice
Precision Rotative Transducers,
Conductive Plastic, Servo Mounting
FEATURES
•
•
•
•
•
•
•
•
•
A complete range of servo mounting rotational transducers
for applications requiring long life accuracy and speed.
Size 08 to 30
Linearity ± 1 % down to ± 0.015 %
Excellent repeatability
Long life
Essentially infinite resolution
Up to 6 electrical functions with the same shaft
On request custom design to meet your specifications
Following MIL-R-39023 and NFC 93-255 requirements
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
ROTATIONAL, conductive plastic
Output by turrets
Professional
Various sizes
ELECTRICAL SPECIFICATIONS
Size
Model
Functions
Theoretical electrical angle (TEA)
Independent linearity (over TEA)
On request best linearity available
Actual electrical angle (AEA)
Ohmic values (RT)
Ohmic value tolerances at 20 °C
Output smoothness
Maximum power rating at 70 °C
Wiper current/load resistance
Tap (current or voltage)
On request with angular position to be
specified
Repeatability
End voltage
Insulation resistance
Dielectric strength
08
34 SF
09
78 SF
11
13
15
18
20
30
116 SF
156 SF
176 SF
134 SF
200 SF
300 SF
Linear, on request specific law
TEA = actual electrical angle (AEA) - 2°
A±1%
or
B  ± 0.5 %
or
C  ± 0.25 %
or
D  ± 0.1 %
D  ± 0.1 %
Down to E  ± 0.05 % Down to F  ± 0.025 % Down to  ± 0.015 %
340° ± 3°
350° ± 2°
1 k - 2 k - 5 k - 10 k - on request other values
± 10 %; on request ± 5 %
 0.025 %
On request  0.01 %
0.25 W
0.3 W
0.4 W
0.5 W
0.75 W
1.0 W
1.2 W
1.5 W
Recommended: a few μA - 1 mA max. continuous/minimum 103 × RT
{ Position: ± 2°
U = Current
/T = voltage Position: ± 2°
{ Width:  4°
 0.01 %
 0.4 % for 470  v RT  1000 / 0.2 % for 1000   RT  2200 / 0.1 % RT > 2200 
 1000 M, 500 VDC
 750 VRMS, 50 Hz
 1000 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical rotation
Mounting/shaft guiding
Housing
Shaft material/common option
Termination
Wiper
Starting torque (N.cm)
1 cup
each additional cup
Moment of inertia (g. cm2)
Weight (g)
1 cup
each additional cup
0.3
11 ± 2
5±2
360° continuous; stops on request
Servo/ball bearings
Diallylphtalate; on request anodized aluminum
Stainless steel/screw driver slot
Turrets; on request flexible leads, cables...
Precious metal multi-finger contact
0.2
0.25
0.15
0.4
0.6
0.8
2.2
2.8
3.5
16 ± 2
20 ± 2
29 ± 2
49 ± 2
67 ± 3
79 ± 3
6±2
7±2
10 ± 2
16 ± 2
18 ± 3
21 ± 3
10
120 ± 10
62 ± 10
PERFORMANCE
Life (million of cycles)
Temperature range
Climatic category
Maximum rotation speed (RPM)
Sine vibration on 3 axes
Mechanical shocks on 3 axes
Revision: 01-Oct-13
 50
-55 °C to +125 °C
55/125/04
600
1.5 mm or 20 g from 10 Hz to 2000 Hz
50 g - 11 ms - half sine
Document Number: 54004
45
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series ROT/SF
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 0.5 mm
0.025
T
0.025
X
H
E
M
F
L
X
3
2
L
1
I
ELECTRICAL
CONNECTIONS
2
3
1
ØA
ØC
ØD
X
CLOCK WISE
VIEWED FROM
SHAFT SIDE
1.6
B
ØG
K ON CLAMP
N
SIZE
09
11
13
15
18
20
30
34 SF
78 SF
116 SF
156 SF
176 SF
134 SF
200 SF
300 SF
Ø shaft stainless steel
3.175
3.175
3.175
3.175
6.345
6.345
6.345
6.345
Shaft length
Ø body plastic molded
Ø flange
Tolerance on flange
Shoulder
Width of groove
Diameter of groove
Turret location
Radius on turrets
Radius on screw clamp
Ø on clamp
Angle between turrets
Total angle
1 cup
2 cups
3 cups
4 cups
5 cups
6 cups
13
19.18
15.875
16.6
22.3
19.05
16.6
36.6
33.337
16.6
44.5
39.674
1.6
1.5
17.57
5.8
14
13.5
19.6
30°
100°
16
23
36
42
54.5
60.5
1.6
1.5
19.8
5.95
15.4
15.4
23.8
30°
100°
20.5
27
40
50
63
74
16.6
16.6
27.07
33.35
24.608
30.16
+0 - 13 μm
1.6
1.6
1.5
1.5
24.8
30.9
6.3
6.3
17.3
20.5
17.3
18.9
27.7
33.6
25°
20°
100°
100°
20.5
20.5
23
25.5
36
39.5
42
47
54
60.5
60.5
68.5
1.6
2.2
33.3
7
23.1
23.1
37.4
20°
80°
23.5
26.13
39.5
49.5
62.5
73.5
1.6
1.8
41.4
10.15
26.5
26.5
44.5
25°
80°
23.5
26
39.5
49.5
62.5
73.5
16.6
16.6
50.9
76.3
47.625 73.025
+0 - 25 μm
2.4
2.4
2.2
1.75
47.6
73.1
10.2
10.2
29.7
43.7
29.7
42.6
50.8
77.5
15°
15°
80°
80°
23.5
23
28.5
34.5
40.97
50.72
64.5
74.5
-
DESIGNATION
MODEL
D
E
F min.
Ø G max.
H min.
I max.
J max.
K max.
L ± 2°
M max.
N max.
POTENTIOMETER REFERENCE
08
DIMENSIONS
A-0
- 0.013
B max.
C max.
J
ORDERING INFORMATION/DESCRIPTION
ROT
SERIES
156
S
F
1
MODEL MOUNTING TYPE CONDUCTOR NUMBER OF CUPS
S: Servo
F: Plastic film
From 1
up to 6
C
LINEARITY
A: ± 1 %
B: ± 0.5 %
C: ± 0.25 %
D: ± 0.1 %
E: ± 0.05 %
F: ± 0.025 %
T
502
e1
TAP
OHMIC VALUE LEAD FINISH
On request First 2 digits are
significant
T: Voltage
numbers 3rd
U: Current
position to
digit indicates
be specified
number of
zeros
Note
• Special characteristics designs on request
SAP PART NUMBERING GUIDELINES
RO 116SF
MODEL
Revision: 01-Oct-13
1
GANG NUMBER
From 1 up to 6
D
LINEARITY
502
OHMIC VALUE
5 k
Document Number: 54004
46
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series 116 BFZ-SFZ
www.vishay.com
Vishay Sfernice
Precision Rotative Transducers 360°
Special Laws: Sine/Cosine
FEATURES
• Laws: sine and cosine
• Size 11
RoHS
• Continuous measure on 360°
COMPLIANT
• Long life up to 25 106 cycles
• Conformity from ± 1 % down to ± 0.5 %
• Bushing or servo mounting
• Following MIL-R-39023 requirements
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Rotational motion transducers with trigonometric laws for a
full angle measurement: 360° (no dead band).
SIZE
MODEL
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
116 SFZ
LAW
ROTATIONAL, conductive plastic
Output by turrets
Professional
Dimensions
11
116 BFZ
Z: Sine and cosine
1 1/16" (27 mm)
ELECTRICAL SPECIFICATIONS
Theoretical Electrical Angle (TEA) = 360°
Actual electrical angle (AEA) = TEA
A±1%
Conformity Peak to Peak
Number of Cups
or
B  ± 0.5 %
Up to 2
Ohmic Values (RT per quadrant)
1 k - 5 k - 10 k - on request other values
Ohmic Value Tolerances at 20 °C
± 20 %
 0.05 %
Output Smoothness
Maximum Power Rating at 70 °C
0.4 W
Wiper Current
Recommended: a few μA - 1 mA max. (continuous)
Ground Taps
On request
Minimum 103 x RT
Resistance Load on Wiper
Resolution
Essentially infinite
 1000 M, 500 VDC
Insulation Resistance
 500 VRMS, 50 Hz
Dielectric Strength
MECHANICAL SPECIFICATIONS
Mechanical Angle (MA)
360° continuous
Mounting Type
Servo
Bushing
Shaft Guiding
Ball bearings
Sleeve bearings
Shaft
Stainless steel
Housing
Plastic molding
Termination
Turrets
Wiper
Starting Torque (N.cm)
Weight (g)
Revision: 26-Jul-12
Precious metal multi-finger contact
1 cup
 0.3
2 cups
 0.5
 0.5
 0.8
30 ± 2 (1 cup) + 17 ± 2 (2 cups)
Document Number: 54006
47
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series 116 BFZ-SFZ
www.vishay.com
Vishay Sfernice
PERFORMANCE
 25 (servo)
Life (106 cycles)
 15 (bushing)
Temperature Range
- 55 °C to + 125 °C
Climatic Category
55/125/04
Speed Rotation (RPM)
600 (servo)
Sine Vibration on 3 Axes
150 (bushing)
1.5 mm or 20 g from 10 Hz to 2000 Hz
Mechanical Shocks on 3 Axes
50 g - 11 ms - half sine
TRIGONOMETRIC FUNCTIONS
SINE/COSINE
OVER 360°
+E
LAW Z
90°
θ
0
SIN
COS
ec
-E
-E
es
∝
β
+E
a=0
ec
= SIN ∝
E
E
= COS β
0° ≤ Θ ≤ 360°
es
β = ∝ + 90°
DIMENSIONS in millimeters, general tolerance ± 0.5 mm
116 SF Z
3
1.6 ± 0.1
116 BF Z
SIZE 11
F
E
2
4
A
A
C
5
6
G
D
B
1
1.6
J
C
K
H
R = I MAX.
1:
2:
3:
4:
5:
6:
Ø 9.52 × 0.78
45°
45°
H
N
B
N
POWER SUPPLY (+)
POWER SUPPLY (-)
WIPER (SINE)
WIPER (COSINE)
GROUND TAP (ON REQUEST)
GROUND TAP (ON REQUEST)
DIMENSIONS
mm
DESIGNATION
116 SF Z
A
+0
- 0.013
3.175
116 BF Z
C
max.
D
+0
- 0.013
E
± 0.1
F
min.
G
max.
H
min.
I
max.
16.6
27.05
24.608
1.6
1.5
24.8
4.5
17.3
-
-
18.5
35
20
27.05
-
-
-
-
3
-
10.3
9.6
16.5
33
B
max.
J
+0
- 0.02
K
max.
N max. N max.
(1 cup) (2 cups)
ORDERING INFORMATION/DESCRIPTION
ROT
116
S
F
Z
1
A
502
e1
SERIES
MODEL
MOUNTING
TYPE
CONDUCTOR
LAW
NUMBER
OF CUPS
CONFORMITY
OHMIC VALUE
LEAD FINISH
S: Servo
B: Bushing
F: Plastic
Z: Sine/
cosine
2 max.
A: ± 1 %
B: ± 0.5 %
First 2 digits are
significant numbers
3rd digit indicates
number of zeros
Note
• Special characteristics and designs on request
SAP PART NUMBERING GUIDELINES
RO 116SFZ
1
B
103
MODEL
GANG NUMBER
CONFORMITY
OHMIC VALUE
1 or 2
A or B
10 k
Revision: 26-Jul-12
Document Number: 54006
48
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Industrial Models
Plastic Film
Technology
Linear
Series REC 10 LA .................
50
Series REC 10 LH.................
52
Series REC 16 LA .................
54
Series REC 16 LH.................
57
Series REC 110 L .................
59
Series REC 115 L .................
63
Series REC 139 L .................
65
Series KIT LMF .....................
67
Professional Models
Series REC 34 L ...................
69
Series REC 38 L ...................
72
Series REC 50 L ...................
74
Series REC 10 LA
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Designed for Mounting
in Hydraulic or Pneumatic Cylinder, Conductive Plastic
(Sealed Series/Ø 10 mm)
FEATURES
• Large range of strokes from 25 mm to 500 mm
• High accuracy
• Very good repeatability
• Continuous resolution
• Easy mounting
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
This sensor is to be installed in the high pressure chamber
of small cylinders and is equipped with glass-sealed
electrical outputs.
Sensor type
Output type
Market appliance
LINEAR, conductive plastic
Wires
Industrial
Dimensions
10 mm dia.
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E
Independent linearity (over TET)
on request
Actual electrical travel (AET)
Total resistance RT
Resistance tolerance at 20 °C
Repeatability
Maximum power rating
Wiper current
Load resistance
From 25 mm to 500 mm in increments of 25 mm
 ± 1 %;  ± 0.1 %
 ± 0.05 % if E  100 mm
 ± 0.025 % if E  200 mm
TET + 6 mm ± 0.5
150 /cm
± 20 %
 0.01 %
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
1000 times RT minimum
Insulation resistance
> 1000 M, 500 VDC
Dielectric strength
> 300 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel (MT)
Body
Rod internal diameter
Support
Operating force
MT = TET
Anodized aluminum
Ø 12 mm
Stainless steel
1 N typical
Sealing
Glass-sealing on electrical outputs
Electrical outputs
Wires AWG 26
Oil
L = 300 mm
Insulating mineral hydraulic
Pressure
Wiper
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
PERFORMANCE
Life
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
Temperature limits
Speed at 20 °C
Revision: 10-Jul-12
- 20 °C to + 80 °C
1.5 m/s max.
Document Number: 54017
50
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 10 LA
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
L = TET + 53.9
G VIEW
O. RING
AET = TET + 6
- 0.1
Ø 12 - 0.2
V + : GREEN WIRE
WIPER: RED WIRE
G
V - : YELLOW WIRE
40.55
3
3
MT = TET
15.3 +- 0.1
0.1
7.3
13.8
+ 0.1
- 0.1
20
3.5
Ø 19
+ 0.2
-0
+ 0.3
Ø 12 + 0.1
Ø 18 +- 0.2
0
Ø 18.38
- 0.025
Ø 18.38 - 0.002
Ø 15.6
Ø 15
1.1 +- 0.1
0
8
O. RING + BACK UP RING
General Tolerance: ± 1 mm
MOUNTING IN ACTUATOR
ELECTRICAL CONNECTIONS
GREEN WIRE: +
RED WIRE: WIPER
YELLOW WIRE: TET
AET
TET = THEORETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
ORDERING INFORMATION/DESCRIPTION
REC
10
LA
4
D
152
W...
e.
SERIES
MODEL
TYPE
THEORETICAL
ELECTRICAL TRAVEL
Times 25 mm
LINEARITY
RESISTANCE
MODIFICATIONS
LEAD
FINISH
Sealed
First 2 digits are
A:  ± 1 %
significant numbers
D:  ± 0.1 %
3rd digit indicates
E:  ± 0.05 %
F:  ± 0.025 %
number of zeros
Special feature
code number
SAP PART NUMBERING GUIDELINES
RE
10 LA
4
D
152
W...
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 10-Jul-12
Document Number: 54017
51
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 10 LH
www.vishay.com
Vishay Sfernice
Precision Linear Transducers,
Designed for Mounting in Hydraulic or Pneumatic Cylinder,
Conductive Plastic Element (Unsealed Series/Ø 10 mm)
FEATURES
• Large range of strokes from 25 mm to 500 mm
• High accuracy
• Very good repeatability
• Continuous resolution
• Easy mounting
These unsealed sensors are suitable for installation in the
high pressure chamber of cylinders.
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
LINEAR, conductive plastic
Wires
Industrial
Dimensions
10 mm dia.
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E
Independent linearity (over TET)
on request
Actual electrical travel (AET)
Total resistance RT
Resistance tolerance at 20 °C
Repeatability
Maximum power rating
Wiper current
Load impedance
From 25 mm to 500 mm in increments of 25 mm
 ± 1 %;  ± 0.1 %
 ± 0.05 % if E  100 mm
 ± 0.025 % if E  200 mm
TET + 6 mm ± 0.5
150 /cm
± 20 %
 0.01 %
0.05 W/cm at 70 °C, 0 W at 125 °C
1 mA max. continuous, recommended: a few μA
1000 times RT minimum
Insulation resistance
> 1000 M, 500 VDC
Dielectric strength
> 300 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel (MT)
Body
Rod internal diameter
Operating force
Electrical outputs
Oil
MT = TET
Anodized aluminum
10 LH: Ø 12 mm
1 N typical
Wires, L = 300 mm
Insulating mineral hydraulic
Pressure
Wiper
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
PERFORMANCE
Life
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
Temperature Limits
Speed at 20 °C
Revision: 26-Jul-12
- 20 °C to + 80 °C
1.5 m/s max.
Document Number: 54020
52
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 10 LH
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
19.9
18.5
AET = TET + 6 ± 1.5
4.5
G VIEW
MT = E
GREEN WIRE
- 0.1
Ø 12 - 0.2
RED WIRE
RESISTIVE TRACK
YELLOW WIRE
L = E + 51 MAX.
15.3
15.3
13.8
1.7
7
+ 0.1
- 0.1
A
+ 0.1
- 0.1
A
Ø 19 +- 00.2
Ø 12 ++ 0.3
0.1
+ 0.2
Ø 18 - 0
1.1 +- 0.1
0
MOUNTING IN ACTUATOR
ELECTRICAL CONNECTIONS
GREEN WIRE : +
RED WIRE: WIPER
YELLOW WIRE: TET
AET
TET = THEARETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
ORDERING INFORMATION/DESCRIPTION
REC
10
LH
4
D
152
W...
e.
SERIES
MODEL
TYPE
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
RESISTANCE
MODIFICATIONS
LEAD FINISH
Unsealed
Times 25 mm
First 2 digits are
A:  ± 1 %
significant numbers
D:  ± 0.1 %
third indicates
E:  ± 0.05 %
number of zeros
F:  ± 0.025 %
Special feature
code number
SAP PART NUMBERING GUIDELINES
RE
10 LH
4
D
152
W...
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 26-Jul-12
Document Number: 54020
53
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 16 LA
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Designed for Mounting in Hydraulic
or Pneumatic Cylinder, Conductive Plastic Element
(Sealed Series/Ø 16 mm)
FEATURES
• Large range of strokes from 25 mm to 2000 mm
• High accuracy
• Very good repeatability
• Continuous resolution
• Easy mounting
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Those sensors are to be installed in the high pressure
chamber of cylinders and are equipped with glass-sealed
electrical outputs.
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
LINEAR, conductive plastic
Wires
Industrial
L x 16 mm dia. (with L = TET + 77 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET = E)
Independent linearity over TET
On request
Actual electrical travel (AET)
Total resistance RT
Resistance tolerance at 20 °C
Repeatability
Maximum power rating
Wiper current
Load impedance
From 25 mm to 2000 mm in increments of 25 mm
 ± 1 %;  ± 0.1 %
 ± 0.05 % if E  100 mm, ± 0.025 % if E  200 mm
TET + 6 mm ± 0.5
150 /cm
± 20 %
 0.01 %
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
1000 times RT minimum
Insulation resistance
> 1000 M 500 VDC
Dielectric strength
> 300 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel MT
Body
Rod internal diameter
Support
Operating force
Sealing
Electrical outputs
On request
Oil
MT = TET
Anodized aluminum
16 LA: Ø 18 mm
Stainless steel
1 N typical
Glass-sealing on electrical outputs
Connector
Wires
Insulating mineral hydraulic
Pressure
Wiper
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
PERFORMANCE
Life
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
Temperature limits
Speed at 20 °C
Revision: 18-Sep-12
- 20 °C to + 80 °C
1.5 m/s max.
Document Number: 54018
54
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 16 LA
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
L = TET + 77
55 MAX.
O. RING
Ø
+0
A - 0.2
AET = TET + 6
53
CONNECTOR
Ø 36
0
Ø 20 +- 0.2
0
Ø 24 +- 0.05
ØA
8.5
7
L ≤ 500
ØC
+ 0.2
- 0.2
17
MT = TET
3
L > 500
18
+ 0.4
Ø D + 0.1
+ 0.6
+ 0.2
Ø D + 0.1
Ø B-0
MODEL
E +- 00.1
DIMENSIONS
+ 0.1
- 0.1
+1
F -0
G
16 LA
A
B
C
D
E
F
G
18
25.2
24
18
1.3
17.8
16.3
ELECTRICAL CONNECTIONS
PIN 3 OR GREEN WIRE: +
PIN 2 OR RED WIRE: WIPER
PIN 1 OR YELLOW WIRE: TET
AET
TET = Theoretical electrical travel
AET = Actual electrical travel
MOUNTING IN ACTUATOR
Revision: 18-Sep-12
Document Number: 54018
55
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 16 LA
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
OTHER DESIGNS OF SUPPORT
...W04200
50
13
12
15
12
Ø 32
Ø 25
+ 0.02
Ø 31.7 - 0
Ø 50 MAX.
M 42 x 1.5
...W04700
...W04707
47 MAX.
23
23
O. RING +
BACK-UP RING
Ø 23 -- 0.05
0.1
2
- 0.007
Ø 23 - 0.02
Ø 23 -- 0.02
0.041
Ø 18
Ø 18.9
f7
- 0.05
Ø 23 - 0.1
Ø 18.4
- 0.05
2.25
Ø 23 - 0.1
5
4
4
4
11
5
8
ORDERING INFORMATION/DESCRIPTION
REC
16
LA
4
D
152
W...
e.
SERIES
MODEL
TYPE
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
RESISTANCE
MODIFICATIONS
LEAD FINISH
Sealed
Times 25 mm
A:  ± 1 %
D:  ± 0.1 %
E:  ± 0.05 %
F:  ± 0.025 %
First 2 digits are
significant
numbers
3rd indicates
number of zeros
Special feature
code number
SAP PART NUMBERING GUIDELINES
RE
16 LA
4
D
152
W....
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 18-Sep-12
Document Number: 54018
56
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 16 LH
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Designed for Mounting in Hydraulic
or Pneumatic Cylinder, Conductive Plastic
(Unsealed Series/Ø 16 mm)
FEATURES
• Large range of strokes from 25 mm to 2000 mm
• High accuracy
• Very good repeatability
• Continuous resolution
• Easy mounting
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
These unsealed sensors are suitable for installation in the
high pressure chamber of cylinders.
QUICK REFERENCE DATA
Sensor type
LINEAR, conductive plastic
Output type
Wires
Market appliance
Dimensions
Industrial
L x 16 mm dia. (with L = TET + 70 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E
Independent linearity (over TET)
On request
Actual electrical travel (AET)
Total resistance RT
Resistance tolerance at 20 °C
Repeatability
Maximum power rating
Wiper current
Loadimpedance
From 25 mm to 2000 mm in increments of 25 mm
 ± 1 %;  ± 0.1 %
 ± 0.05 % if E  100 mm,  ± 0.025 % if E  200 mm
TET + 6 mm ± 0.5
150 /cm
± 20 %
 0.01 %
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
1000 times RT minimum
Insulation resistance
> 1000 M 500 VDC
Dielectric strength
> 300 VRMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel (MT)
Body
Rod internal diameter
Support
Operating force
Electrical outputs
Oil
MT = TET
Anodized aluminum
16 LH: Ø 18 mm
2 screws
1 N typical
Wires 300 mm long
Insulating mineral hydraulic
Pressure
Wiper
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
PERFORMANCE
Life
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
Temperature limits
Speed at 20 °C
Revision: 18-Sep-12
- 20 °C to + 80 °C
1.5 m/s max.
Document Number: 54016
57
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 16 LH
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
AET = TET + 6
ELECTRICAL CONTINUITY = TET + 3
FIXING SCREWS
Hc M4-8
+0
Ø 18 - 0.2
1.5
1.5
ØA
16 LH
18
6
0.2
Ø C +- 0.2
Ø
46
L > 500
L ≤ 500
MODEL
3
8.5
MT = TET
L = TET + 70
+ 0.4
Ø D + 0.1 Ø D + 0.6
+ 0.1
B +- 00.2
+ 0.1
E +- 00.1
G - 0.1
+1
F -0
MODEL
B
C
D
E
F
G
16 LH
25.2
24
18
1.3
17.8
16.3
MOUNTING IN ACTUATOR
ELECTRICAL CONNECTIONS
GREEN WIRE: +
RED WIRE: WIPER
YELLOW WIRE: TET
AET
TET = THEORETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
On these models:
Cylinder sealing and electrical connections required
ORDERING INFORMATION/DESCRIPTION
REC
16
LH
4
D
152
W...
e.
SERIES
MODEL
TYPE
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
RESISTANCE
MODIFICATIONS
LEAD FINISH
Unsealed
Times 25 mm
A:  ± 1 %
D:  ± 0.1 %
E:  ± 0.05 %
F:  ± 0.025 %
First 2 digits are
significant numbers
3rd digit indicates
number of zeros
Special feature
code number
SAP PART NUMBERING GUIDELINES
RE
16 LH
4
D
152
W....
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 18-Sep-12
Document Number: 54016
58
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 110 L
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Conductive Plastic,
up to 450 mm
FEATURES
• Large measurement range
• High accuracy ± 1 % down to ± 0.05 %
• Essentially infinite resolution
• Easy mounting
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
The 110 L is a compact, robust, easily mounted precision
industrial motion transducer.
Sensor type
Output type
Market appliance
Dimensions
LINEAR, conductive plastic
Connector
Industrial
L x 18 mm x 41 mm (with L = TET + 47 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E
Independent linearity (over TET)
on request
Actual electrical travel (AET)
Repeatability
Ohmic values (RT)
Resistance tolerance at 20 °C
Maximum power rating
Wiper current
Load resistance
Insulation resistance
Dielectric strength
25 mm to 450 mm in increments of 25 mm
 ± 1 %  ± 0.1 %
 ± 0.05 % for E  100 mm
See electrical connections table 1
 0.01 %
From 400 /cm to 2 k/cm
± 20 %
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
Minimum 103 x RT
 1000 M, 500 VDC
 750 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel
Housing
Operating force
Shaft (free rotation)
Termination
on request
Wiper
Mounting
TET + 6 mm min.
Anodized aluminum
5 N typical
Stainless steel
Connector: 723 series
by cable
Precious metal multifinger
Movable brackets
PERFORMANCE
Operating life
Temperature range
Mechanical shocks on 3 axes
Sine vibration on 3 axes
Speed (max.)
Revision: 17-Sep-12
40 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 55 °C to + 125 °C
50 g - 11 ms - half sine
1.5 mm peak to peak or 15 g - 10 Hz - 2000 Hz
8 m/s for f < 2 Hz; 3 m/s for f < 5 Hz
Document Number: 54012
59
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 110 L
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
STANDARD MODEL
3.8
41
23
M5
7
A
10
4 HOLES Ø 4.2
SETTING AREA: D = TET + 35
18
26
TET + 47
28.8 ± 0.2
45
VIEW A
WITH CABLE OUTPUT: W04029
7
26.5
CABLE OUTPUT 3 WIRES AWG24
LENGTH 300 mm MIN.
A
4 HOLES Ø 4.2
M5
3.8
18
28.8 ± 0.2
SETTING AREA: D = TET + 35
45
TET + 47
26
VIEW A
ELECTRICAL CONNECTIONS
PIN 3: +
BLUE WIRE: +
PIN 2: WIPER
RED WIRE: WIPER
PIN 1: -
WHITE WIRE: TET
TET
AET
AET
MT
MT
TET = THEORETICAL ELECTRICAL TRAVEL
AET = Actual ELECTRICAL TRAVEL
MT = MECHANICAL TRAVEL
TABLE 1
THEORETICAL ELECTRICAL TRAVEL
TET
ACTUAL ELECTRICAL TRAVEL
AET
TOLERANCE
From 25 mm to 275 mm
TET + 1 mm
± 0.5 mm
From 300 mm to 450 mm
TET + 1 mm
± 0.8 mm
Revision: 17-Sep-12
Document Number: 54012
60
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 110 L
www.vishay.com
Vishay Sfernice
OPTION: SPRING LOADED SHAFT DIMENSIONS in millimeters, general tolerance ± 1 mm
110L WITH SPRING LOADED SHAFT: W04030
3.8
A
SETTING AREA:
D = TET + 35
TET + 47
7
41
23
4 HOLES Ø 4.2
18
7
10
X
28.8 ± 0.2
45
VIEW A
TABLE 2
MODEL
X
110 L1
75
110 L2
112
110 L3
150
110 L4
188
110L WITH CABLE OUTPUT AND SPRING LOADED SHAFT: W04031
7
26.5
CABLE OUTPUT 3 WIRES AWG24
LENGTH 300 mm MIN.
3.8
4 HOLES Ø 4.2
A
18
28.8 ± 0.2
45
SETTING AREA: D = TET + 35
TET + 47
7
X
VIEW A
Revision: 17-Sep-12
Document Number: 54012
61
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 110 L
www.vishay.com
Vishay Sfernice
ACCESSORIES ON REQUEST DIMENSIONS in millimeters, general tolerance ± 1 mm
1) FEMALE CONNECTOR
Vishay’s Reference: 328870
58 MAX.
2) SPECIAL BALL JOINT
Vishay’s reference: 323654
RADIAL CLEARANCE IN
X AND Y ± 1.2 mm
56 MAX.
ANGULAR CLEARANCE
± 15°
M5
8 MAX.
X
CLEARANCE 3
ORDERING INFORMATION/DESCRIPTION
REC
110
L
3
D
103
W...
e.
SERIES
MODEL
NUMBER
OF TRACKS
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
OHMIC VALUE
MODIFICATIONS
LEAD FINISH
L = 1 track
Times 25 mm
First 2 digits are
significant numbers
3rd digit indicates
number of zeros
Special feature
code number
A: ± 1 %
D: ± 0.1 %
E: ± 0.05 %
SAP PART NUMBERING GUIDELINES
RE
110 L
3
D
103
W...
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 17-Sep-12
Document Number: 54012
62
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 115 L
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Conductive Plastic,
up to 1000 mm
FEATURES
• Measurement range 25 mm to 1000 mm
• High accuracy ± 1 % down to ± 0.025 %
• Excellent repeatability
• Essentially infinite resolution
• Non sensitive to temperature variations
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
The 115 L is a simply mounted, robust, high precision
industrial linear motion transducer.
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
LINEAR, conductive plastic
Connector
Industrial
L x 31.7 mm x 34.8 mm (with L = TET + 75 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E
Independent linearity (over TET)
on request
Actual electrical travel (AET)
Ohmic values (RT)
Resistance tolerance at 20 °C
Repeatability
Maximum power rating
Wiper current
Load resistance
Insulation resistance
From 25 mm to 1000 mm in increments of 25 mm
 ± 1 %  ± 0.1 %
 ± 0.05 % for E  100 mm  ± 0.025 % for E  200 mm
AET = TET + 1.5 mm min.
400 /cm to 2 k/cm
± 20 %
 ± 0.01 %
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
minimum 103 x RT
 1000 M, 500 VDC
Dielectric strength
 1000 VRMS, 50 Hz
Protection resistor
Integrated inside the transducer to protect against errors when setting up (short circuit)
MECHANICAL SPECIFICATIONS
Mechanical travel
Housing
Operating force
Shaft (free rotation)
E + 8 ± 2 mm
Anodized aluminum
7.5 N typical
Stainless steel
Termination
Hydraulic type connector
DIN 43650
Wiper
Precious metal multifinger
Mounting
Movable brackets
PERFORMANCE
Operating life
Temperature range
Sine vibration on 3 axes
Mechanical shocks on 3 axes
Speed (max.)
Revision: 17-Sep-12
40 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 55 °C to + 125 °C
1.5 mm peak to peak 0 Hz to 10 Hz
15 g - 10 Hz - 2000 Hz
50 g - 11 ms - half sine
8 m/s for f < 2 Hz; 3 m/s for f < 5 Hz
Document Number: 54013
63
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 115 L
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
31.7
L MAX. = TET + 75
25.4
A
4
34.75
1
31.7
M6
2
18.9
13.1
3
18.9
2 x 4.2
43
63
A
15
VIEW A-A
ELECTRICAL CONNECTIONS
4. GROUND
PIN 3: +
PIN 2: WIPER
PIN1: TET
AET
TET = THEORETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
MT = MECHANICAL TRAVEL
MT
ACCESSORIES ON REQUEST DIMENSIONS in millimeters, general tolerance ± 1 mm
1) FEMALE CONNECTOR
Vishay’s Reference: 3248610
2) SPECIAL BALL JOINT ON SHAFT
Vishay’s reference: 323655
36 MAX.
RADIAL CLEARANCE IN
X AND Y: ±1.2 mm
41 MAX.
8 MAX.
ANGULAR CLEARANCE
±15°
Y
X
M6
48 MAX.
CLEARANCE 3
ORDERING INFORMATION/DESCRIPTION
REC
115
L
23
D
103
W...
e.
SERIES
MODEL
NUMBER
OF TRACKS
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
OHMIC VALUE
MODIFICATIONS
LEAD
FINISH
L=1
Times 25 mm
A: ± 1 %
D: ± 0.1 %
E: ± 0.05 %
F: ± 0.025 %
First 2 digits are
significant numbers
3rd digit indicates
number of zeros
Special feature
code number
SAP PART NUMBERING GUIDELINES
RE
115 L
23
D
103
W...
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 17-Sep-12
Document Number: 54013
64
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 139 L
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Conductive Plastic,
up to 3000 mm
FEATURES
• Measurement range 25 mm to 3000 mm
• High accuracy ± 1 % down to ± 0.025 %
• Excellent repeatability
• Essentially infinite resolution
• Simple mounting
• Actuation tolerant to some misalignment
• Reduced bulk
The 139 L is a robust industrial linear motion transducer with
a side actuation, ideally suited for applications with very
long travels.
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
LINEAR, conductive plastic
Connector
Industrial
L x 36 mm x 61 mm (with L = TET + 169 mm max.)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E
Independent linearity (over TET)
On request
From 25 mm to 3000 mm in increments of 25 mm
 ± 1 %;  ± 0.1 %
 ± 0.05 % for E  100 mm
 ± 0.025 % for E  200 mm
Actual electrical travel (AET)
AET = E + 1.5 mm min.
Ohmic value (RT)
400 /cm to 2 k/cm
Resistance tolerance at 20 °C
Repeatability
Maximum power rating
Wiper current
Load resistance
± 20 %
 0.01 %
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
Minimum 103 x RT
Insulation resistance
 1000 M, 500 VDC
Dielectric strength
 1000 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical travel (MT)
Housing
Operating force
Coupling
Termination
Wiper
Sealed to
Mounting
See dimensions table 1
Anodized aluminum
2.5 N typical
Self alignment
Hydraulic type connector DIN 43650
Precious metal multifinger
IP53
Movable brackets
PERFORMANCE
Operating life
Temperature range
Sine vibration on 3 axes
Mechanical shocks on 3 axes
Speed (max.)
Revision: 18-Sep-12
40 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 55 °C to + 125 °C
1.5 mm peak to peak or 15 g - 10 Hz - 2000 Hz
50 g - 11 ms - half sine
8 m/s for f < 2 Hz; 3 m/s for f < 5 Hz
Document Number: 54015
65
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 139 L
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
STANDARD MODEL
ANGULAR CLEARANCE
± 10°
90
26.5 ± 1
CM
18 +- 02
CET
M5
1+- 04
26
51.7
3
MOVABLE BRACKETS
L
31.5
12
36
4. GROUND
PIN 3: +
PIN 2: WIPER
61 MAX.
PIN 1: -
3
2
TET
AET
1
4
MT
Ø 5.2
TET = THEORETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
MT = MECHANICAL TRAVEL
50
67
LENGTH
AET
MT
L
L1 to L20
TET + 1.5 min.
TET + 7 min.
TET + 158 max.
L21 to L40
TET + 1.5 min.
TET + 11 min.
TET + 163 max.
L41 to L120
TET + 1.5 min.
TET + 15 min.
TET + 169 max.
ELECTRICAL CONNECTIONS
FEMALE CONNECTOR
36 MAX.
48 MAX.
Vishay’s Reference: 3248610
ORDERING INFORMATION/DESCRIPTION
REC
139
L
43
D
103
W...
e3
SERIES
MODEL
NUMBER
OF TRACKS
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
OHMIC VALUE
MODIFICATIONS
LEAD FINISH
L=1
Times 25 mm
Special feature
code number
Pure tin
First 2 digits are
A: ± 1 %
significant numbers
D: ± 0.1 %
3rd digit indicates
E: ± 0.05 %
F: ± 0.025 %
number of zeros
SAP PART NUMBERING GUIDELINES
RE
139 L
43
D
103
W....
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 18-Sep-12
Document Number: 54015
66
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series KIT LMF
www.vishay.com
Vishay Sfernice
Conductive Plastic Motion Transducer Elements (KIT),
up to 1000 mm
FEATURES
• Measurement range 25 mm to 1000 mm
• High accuracy ± 1 % down to ± 0.025 %
• Good repeatability
• Simple and flexible mounting
• Essentially infinite resolution
Made in two separate parts:
- the sensing element
- the wiper
Special designs available on request
The LMF is a reduced bulk, precision motion transducer,
designed for easy integration into equipment.
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
LINEAR, conductive plastic
Solder pads
Industrial
L x 15 mm x 1.6 mm (with L = TET + 18 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical angle (TEA = E)
From 25 mm to 1000 mm in increments of 25 mm
 ± 1 %;  ± 0.1 %
Independent linearity (over TET)
On request
 ± 0.05 % for E 100 mm
Actual electrical travel (AET)
AET = TET + 2 mm
From 400 /cm to 2 k/cm
Ohmic value
Resistance tolerance at 20 °C
± 20 %
 0.01 %
Repeatability
Maximum power rating
Wiper current
Load resistance
Insulation resistance
Dielectric strength
 ± 0.025 % for E  200 mm
0.05 W/cm at 40 °C
0 W at 85 °C
Recommended: a few μA - 1 mA max. (continuous)
Minimum 103 x RT
 1000 M, 500 VDC
 750 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Support of element
On request
Wiper (non insulated)
On request
Fiberglass epoxy
Plastic moulding
Precious metal multifinger
Insulated
Terminals
On request
Soldering pads
By wires
Fixing
On request
Glued: Double face Isotac
Screwed: Holes in the support
PERFORMANCE
Operating life
Temperature range
Revision: 17-Sep-12
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 55 °C to + 125 °C
Document Number: 54009
67
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series KIT LMF
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 0.2 mm
0.3
STANDARD MODEL: LMF...W02851
± 0.2
5.8
WORKING POSITION
1.6
L = TET + 18 MAX.
WIPER TRAVELS
COLLECTOR TRACK
2
2.4
SOLDERING PADS
13
5.2
2
6.35
2.4
11.15
15
8
7
3.5
RESISTIVE TRACK
1
TET = E
SILVER AREA
10 ± 0.5 SILVER AREA
AET = TET + 2
12.2
EXAMPLES OF SPECIAL DESIGNS
ORDERING INFORMATION/DESCRIPTION
KIT
LM
F
3
D
103
W...
e.
SERIES
MODEL
CONDUCTOR
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
OHMIC VALUE
MODIFICATIONS
LEAD FINISH
F: Plastic
S: Serigraphy
Times 25 mm
A: ± 1 %
D: ± 0.1 %
E: ± 0.05 %
F: ± 0.025 %
First 2 digits are
significant numbers
3rd digit indicates
number of zeros
Special feature
code number
SAP PART NUMBERING GUIDELINES
LMF
3
D
103
W....
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 17-Sep-12
Document Number: 54009
68
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 34 L
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Conductive Plastic,
up to 450 mm
FEATURES
• Measurement range 25 mm to 450 mm
• High accuracy ± 1 % down to ± 0.025 %
• Essentially infinite resolution
• Long life
• Sealed on request
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
The 34 L is a compact, accurate and adaptable motion
transducer for both industrial and military markets.
QUICK REFERENCE DATA
Sensor type
LINEAR, conductive plastic
Output type
Wires
Market appliance
Dimensions
Professional
L x 19 mm dia. (with L = TET + 63 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET = E)
in increments of 25 mm
25 mm
450 mm
 ± 1 % -  ± 0.1 %
 ± 0.05 % for E  100 mm
 ± 0.025 % for E  200 mm
Independent linearity (over TET)
On request
Actual electrical travel (AET)
See table 1
From 400 /cm to 2 k/cm
Ohmic values (RT)
Resistance tolerance at 20 °C
± 20 %
 0.01 %
Repeatability
Maximum power rating
Wiper current
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
Minimum 103 x RT
Load resistance
Number of tracks
1; on request 2
 1000 M, 500 VDC
Insulation resistance
 750 VRMS, 50 Hz
Dielectric strength
MECHANICAL SPECIFICATIONS
Mechanical travel
TET + 2 mm min.
Housing
Operating force
On Request
Shaft (free rotation)
Termination
On request
Wiper
Sealing
Anodized aluminum
0.35 N typical
(standard model)
2.50 N typical
(sealed model)
Stainless steel
3 wires PTFE AWG-30 L = 300 mm
cable or connector
Precious metal multifinger
IP65 on request
PERFORMANCE
Operating life
Temperature range
Sine vibration on 3 axes
Mechanical shocks on 3 axes
Revision: 18-Sep-12
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 55 °C to + 125 °C
1.5 mm peak to peak or 15 g - 10 Hz - 2000 Hz
50 g - 11 ms - half sine
Document Number: 54019
69
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 34 L
www.vishay.com
Vishay Sfernice
STANDARD MODEL DIMENSIONS in millimeters, general tolerance ± 1 mm
34 L
-0
Ø 5 - 0.025
0.5
0.5
Z = 12
25.4 ± 1
Z = 12
L = E + 63
Ø 19.05 ± 0.25
Z = TIGHTENING ZONE
ELECTRICAL CONNECTIONS
TET = E
AET
MT
TERMINALS
WIRE
CABLE
3 ALIM. (+):
GREEN
BLUE
2 WIPER:
RED
RED
1 ALIM. (-):
YELLOW WHITE
TET = THEORETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
MT = MECHANICAL TRAVEL
TET = E
AET
TOL.
25 mm to 275 mm
E + 1 mm
± 0.5 mm
300 mm to 450 mm
E + 1 mm
± 0.8 mm
ACCESSORIES ON REQUEST - DIMENSIONS in millimeters, general tolerance ± 3 mm
Clamp for 34L
Vishay Reference: CQ00051
34
15
13
26
6.1
5.5
11 ± 0.3
Ø9
Ø 4.5
Revision: 18-Sep-12
Document Number: 54019
70
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 34 L
www.vishay.com
Vishay Sfernice
OPTIONS - DIMENSIONS in millimeters, general tolerance ± 1 mm
OPTION 1: SEALED (IP65): W03280
Ø 13 MAX.
L
13 MAX.
MODEL
34 L
CODE
W03280
L
TET + 83.5
OPTION 2: DELIVERED WITH CLAMPS AND BINDER CONNECTOR 680: W05013
11.1 ON FLATS
6.35 ON FLATS
Ø 6.35 x 0.9
1/4-28 NEF-2A
2
Ø 19.05
34.4
23
44.8
11.4
AJUSTABLE FIXING
MAX. CLEARANCE A
Ø 3.9
34.5
X = TET + 70
10
OPTION 3: SPRING LOADED SHAFT; OUTPUT BY SHIELDED CABLE: W01744
MODEL
34 L1
34 L2
34 L3
34 L4
Ø 13 MAX.
A
L
13 MAX.
CODE
W01744
W01744
W01744
W01744
A
61.4
93.6
125.8
158
L
TET + 119.5
OPTION 4: DOUBLE BALL JOINT: W03263
X
ØV
W
15
Y
L
B
MODEL CODE
34 L W03263 L1 to L5
L6 to L10
L11 to L12
B
TET + 151.6
TET + 173.6
TET + 230
L
TET + 82.8
TET + 104.8
TET + 161.2
ØV
5
5
5
W
8
8
8
X
18
18
18
Y
42 ± 2
42 ± 2
42 ± 2
TET
25 to 125
150 to 250
275 to 300
ORDERING INFORMATION/DESCRIPTION
REC
34
L
3
D
103
W...
e.
SERIES
MODEL
NUMBER
OF TRACKS
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
OHMIC VALUE
MODIFICATIONS
LEAD FINISH
L = 1 track
LL = 2 tracks
Times 25 mm
A: ± 1 %
D: ± 0.1 %
E: ± 0.05 %
F: ± 0.025 %
First 2 digits are
significant numbers
3rd digit indicates
number of zeros
Special feature
code number
SAP PART NUMBERING GUIDELINES
RE
34 L
3
D
103
W....
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 18-Sep-12
Document Number: 54019
71
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 38 L
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Conductive Plastic,
up to 150 mm
FEATURES
• Measurement range 12.5 mm to 150 mm
• High accuracy ± 1 % down to ± 0.1 %
RoHS
• Long life
COMPLIANT
• Essentially infinite resolution
• Very small dimension: External diameter = 9.52 mm
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
The 38 L is a very compact model especially designed for
precise measurement of short travels.
Sensor type
LINEAR, conductive plastic
Output type
Wires
Market appliance
Professional
Dimensions
9.52 mm dia.
ELECTRICAL SPECIFICATIONS
Theoretical Electrical Travel (TET)
Actual Electrical Rravel (AET)
Independent Linearity (over TET)
Repeatability
Ohmic Values (RT)
Resistance Tolerance at 20 °C
Wiper Current
Load Resistance
Insulation Cesistance
Dielectric Strength
From 12.5 mm to 150 mm see table 1
AET = TET + 1 mm
 ± 1 % -  ± 0.5 %
 ± 0.25 % for E  25 mm
 ± 0.1 % for E  50 mm
 0.01 %
From 400 /cm to 2 k/cm
± 20 %
Recommended: a few μA - 1 mA max. (continuous)
Minimum 103 x RT
 1000 M, 500 VDC
 500 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical Travel (MT)
Housing
Operating Force
Termination
Wiper
MT = TET + 3 mm ± 1 mm
Anodized aluminum
0.35 N typical
3 wires PTFE AWG 28
length: 300 mm
Precious metal multifinger
PERFORMANCE
Operating Life
Temperature Range
Sine Vibration on 3 Axes
Mechanical Shocks on 3 Axes
Revision: 02-Aug-12
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 55 °C to + 125 °C
1.5 mm peak to peak or 15 g - 10 Hz - 2000 Hz
50 g -11 ms - half sine
Document Number: 54010
72
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 38 L
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance ± 1 mm
3 WIRES AWG 28Lg: 300 mm
THERMOFIT SLEEVE
A
1/
8
Ø 9.52 ± 0.25
- 40 UNC - 2A
12.7
10 MIN.
10 ± 2: CLAMPING AREA
10 ± 2: CLAMPING AREA
TABLE 1
SIZE
TET
MT
A
38 L0.5
12.5
15.5
43.5
38 L01
25
28
56
38 L02
50
53
81
38 L03
75
78
106
38 L04
100
103
131
38 L05
125
128
156
38 L06
150
153
181
ELECTRICAL CONNECTIONS
GREEN
RED
YELLOW
TET
AET
MT
TET = THEORETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
MT = MECHANICAL TRAVEL
ORDERING INFORMATION/DESCRIPTION
REC
38
L
0.5
C
102
W...
e1
SERIES
MODEL
NUMBER
OF TRACKS
ELECTRICAL
TRAVEL
LINEARITY
OHMIC VALUE
MODIFICATIONS
LEAD FINISH
L = 1 track
0.5 = 12.5 mm
1 = 25 mm
2 = 50 mm
3 = 75 mm
4 = 100 mm
5 = 125 mm
6 = 150 mm
A: ± 1 %
B: ± 0.5 %
C: ± 0.25 %
D: ± 0.1 %
First 2 digits are
significant
numbers 3rd digit
indicates number
of zeros
Special feature code
number
Sn Ag Cu
SAP PART NUMBERING GUIDELINES
RE
38 L
0.5
C
102
W....
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 02-Aug-12
Document Number: 54010
73
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 50 L
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Conductive Plastic,
up to 300 mm
FEATURES
• Measurement range 25 mm to 300 mm
• High accuracy ± 1 % down to ± 0.025 %
• Essentially infinite resolution
The 50 L is a compact, accurate and adaptable motion
transducer for both industrial and military markets.
• Long life
• Sealed on request
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
LINEAR, conductive plastic
Wires
Professional
L x 12.7 mm dia. (with L = TET + 41 mm)
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET = E)
in increments of 25 mm
25 mm
300 mm
 ± 1 % -  ± 0.1 %
 ± 0.05 % for E  100 mm
 ± 0.025 % for E  200 mm
Independent linearity (over TET)
on request
Actual electrical travel (AET)
AET = E + 1 mm ± 0.5 mm
400 /cm to 2 k/cm
Ohmic values (RT)
Resistance tolerance at 20 °C
± 20 %
 0.01 %
Repeatability
Maximum power rating
Wiper current
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few μA - 1 mA max. (continuous)
Minimum 103 x RT
Load resistance
Number of tracks
1; on request 2
 1000 M, 500 VDC
Insulation resistance
 500 VRMS, 50 Hz
Dielectric strength
MECHANICAL SPECIFICATIONS
Mechanical travel
TET + 2 mm min.
Housing
Operating force
on request
Shaft (free rotation)
Termination
on request
Wiper
Sealing
Anodized aluminum
0.35 N typical
(standard model)
2.50 N typical
(sealed model)
Stainless steel
3 wires PTFE AWG-30, L = 300 mm
cable or connector
Precious metal multifinger
IP65 on request
PERFORMANCE
Operating life
Temperature range
Sine vibration on 3 axes
Mechanical shocks on 3 axes
Revision: 17-Sep-12
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 55 °C to + 125 °C
1.5 mm peak to peak or 15 g - 10 Hz - 2000 Hz
50 g -11 ms - half sine
Document Number: 54011
74
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 50 L
www.vishay.com
Vishay Sfernice
STANDARD MODEL DIMENSIONS in millimeters, general tolerance ± 1 mm
50 L
Ø 3.175 -- 00.025
0.5
0.5
Z=7
Z=7
L = E + 41
25.4 ± 1
Ø 12.7 ± 0.25
Z = TIGHTENING ZONE
ELECTRICAL CONNECTIONS
TET = E
AET
MT
TERMINALS
WIRE
CABLE
3 ALIM. (+):
GREEN
BLUE
2 WIPER:
RED
RED
1 ALIM. (-):
YELLOW WHITE
TET = THEORETICAL ELECTRICAL TRAVEL
AET = ACTUAL ELECTRICAL TRAVEL
MT = MECHANICAL TRAVEL
ACCESSORIES ON REQUEST - DIMENSIONS in millimeters, general tolerance ± 3 mm
Clamp for 50L
Vishay Reference: CQ00050
26
11
9.5
19
6.1
5.5
11 ± 0.3
Ø9
Ø 4.5
Revision: 17-Sep-12
Document Number: 54011
75
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Series REC 50 L
www.vishay.com
Vishay Sfernice
OPTIONS - DIMENSIONS in millimeters
OPTION 1: SEALED (IP65): W03242
Ø 13 MAX.
L
13 MAX.
MODEL
CODE
L
50 L ...
W03242
TET + 70.5
L
OPTION 2: SPRING LOADED SHAFT; OUTPUT BY SHIELDED CABLE: W01743
Ø 13 MAX.
A
L
13 MAX.
MODEL
CODE
A
50 L1
W01743
70
50 L2
W01743
116
50 L3
W01743
162
50 L4
W01743
208
TET + 97.8
OPTION 3: DOUBLE BALL JOINT: W01565
X
W
15
ØV
Y
L
B
MODEL CODE
50 L W01565
B
L
ØV
W
X
Y
TET
L1 to L3
TET + 108.5
TET + 57.5
3
6
12
30 ± 2
25 to 75
L4 to L6
TET + 133.5
TET + 82.5
3
6
12
30 ± 2
100 to 150
ORDERING INFORMATION/DESCRIPTION
REC
50
L
3
D
103
W...
e1
SERIES
MODEL
NUMBER
OF TRACKS
THEORETICAL
ELECTRICAL
TRAVEL
LINEARITY
OHMIC VALUE
MODIFICATIONS
LEAD FINISH
L = 1 track
LL = 2 tracks
Times 25 mm
A: ± 1 %
D: ± 0.1 %
E: ± 0.05 %
F: ± 0.025 %
First 2 digits are
significant numbers
3rd digit indicates
number of zeros
Special feature
code number
Sn Ag Cu
SAP PART NUMBERING GUIDELINES
RE
50 L
3
D
103
W....
SERIES
MODEL
TET
LINEARITY
OHMIC VALUE
SPECIAL FEATURES
Revision: 17-Sep-12
Document Number: 54011
76
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Single Turn Models
Wirewound
Technology
Single Turn Models
Model 100 .............................
78
Model 122 ............................
81
Model 132 ............................
84
Model 140 ............................
86
Model 142 ............................
88
Model 152 ............................
90
Model 202 ............................
93
Model 302 ............................
96
Model 702 ............................
99
Model 100
www.vishay.com
Vishay Spectrol
1 5/16" (33.3 mm) Single Turn Wirewound
Precision Potentiometer
FEATURES
• Gangable up to 6 sections
• Extra taps on request
• Bushing and servo mount types available
• Ohmic value range: 5  up to 35 k
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, single turn wirewound
Output type
Output by turrets
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Industrial
1 5/16" (33.3 mm)
Dimensions
ELECTRICAL SPECIFICATIONS
PARAMETER
SPECIAL
to 35 k
±1%
±3%
STANDARD
5  to 20 k
±3%
±5%
Total resistance:
Tolerance: 50  and above
Below 50 
End voltage
Linearity x total applied voltage for total resistance above 20 .
2.0 % of total applied voltage for 20  and below
Linearity (independent):
5  to 100 
100  to 500 
500 to 3 k
3 k to 15 k
15 k and above
STANDARD
± 1.0 %
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
BEST PRACTICAL
± 0.50 %
± 0.35 %
± 0.25 %
± 0.20 %
± 0.15 %
100  ENR (MIL-R-12934)
Noise
Electrical angle
352° ± 2°
Power rating
2.75 W at 40 °C ambient
Insulation resistance
100 M min, 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Taps (extra)
Up to 13 (position tolerance: ± 1°)
Phasing
CCW taps of multiple sections aligned with CCW tap of section 1 to ± 1°
Linearity x total resistance or 0.5 , whichever is greater
Absolute minimum resistance
ORDERING INFORMATION/DESCRIPTION
The Model 100 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
100
S
1
10K
BO1
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS
OHMIC VALUE
PACKAGING
B: Bushing
S: Servo
Up to 6 sections
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
100
B
2
203
502
B01
Model
STYLE
NUMBER OF
SECTIONS
OHMIC VALUE
OHMIC VALUE
PACKAGING
Section N° 1: 20K
Section N° 2: 5K
Box of 1 piece
Bushing
Revision: 05-Apr-13
Document Number: 57034
78
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 100
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 100B/100-1...
± 0.010
0.705
(17.91)
1
0.242 MIN.
(6.15)
± 0.031
0.875
(22.22)
0.375
(9.52)
3
22 1/2°
TYP.
+ 0.0000
- 0.0010
± 0.031
1
Ø 0.4062 MTG.
(10.32)
0.062
(1.57)
0.2497
(6.34)
2
+ 0.0000
- 0.0003
0.875R
(22.22) MAX.
Ø 1.312
(33.32)
0.562
(14.27)
± 0.031
3/
0.062 (1.57)
8
- 32 UNEF 2A
Ø 0.125
(3.18)
MTG. FACE
SERVO MOUNT: 100S/100-2...
± 0.031
± 0.010
0.562
0.800
(20.32) (14.27)
1
0.337 MIN.
(8.56)
2
0.073 (1.85)
0.062 (1.57)
1
+ 0.0000
3
CW
SCHEMATIC
0.062 (1.57) - 0.0003 Ø
0.2497
(6.34)
+ 0.0000
- 0.0005
Ø 1.1875 Ø 1.312
(30.16) (33.32)
MTG.
Ø 1.312
(33.32)
Ø 1.187
(30.15)
MAX.
1
ADD 0.566 ± 0.002 (14.38) FOR EACH
ADDITIONAL SECTION
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2 °
MTG. FACE
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing type
Ganging
Torque (maximums)
Servo, 1 section
Bushing, 1 section
Each additional section
Mechanical tolerances (maximums):
Shaft runout (TIR/In)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Moment of inertia
Weight
Single section
Each additional section
Revision: 05-Apr-13
360° (continuous)
Servo mount: ball bearing
Bushing mount: sleeve bearing
6 sections maximum, terminal alignment, added sections, within ± 10° of section 1 terminals
STARTING
0.60 oz. - in (43.20 g - cm)
1.00 oz. - in (72.00 g - cm)
0.30 oz. - in (21.60 g - cm)
RUNNING
0.30 oz. - in (21.60 g - cm)
0.75 oz. - in (54.00 g - cm)
0.30 oz. - in (21.60 g - cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.004" (0.10 cm)
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
1.0 g - cm2 per section maximum
2.0 oz. maximum (56.7 g)
0.75 oz. maximum (21.3 g)
Document Number: 57034
79
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 100
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
Housing and lids
ENVIRONMENTAL SPECIFICATIONS
Aluminum, anodized
Vibration
Shaft
Stainless steel, non-magnetic
non-passivated
Shock
Terminals
Brass, plated for solderability
Rotational life
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
15 g thru 2000 CPS
50 g
Salt spray
96 h
1 million shaft revolutions
Load life
Steel, nickel plated
Brass, nickel plated
900 h
Temperature range
- 55 °C to + 105 °C
MARKING
Units shall be marked with Vishay Spectrol name, model number and data code and on each section,
resistance, resistance tolerance, linearity and terminal identification.
Example of a marking for a standard part: 100-11103
Unit identification
RATED POWER IN W
POWER RATING CHART
RESISTANCE ELEMENT DATA
MAXIMUM MAXIMUM
WIRE
OHMS CURRENT VOLTAGE
TEMP.
ACROSS
AT 70 °C
PER
COEF.
COIL
TURN AMBIENT
(ppm/°C)
(V)
(mA)
RESISTANCE
VALUES
()
RESOLUTION
(%)
2.5
5
0.346
0.017
742
3.7
800
2.0
10
0.298
0.030
524
5.2
800
1.5
20
0.236
0.047
371
7.4
800
1.0
50
0.244
0.122
235
12
20
0.5
100
0.222
0.222
166
17
20
200
0.181
0.361
117
23
20
500
0.178
0.885
74
37
20
1K
0.138
1.38
52
52
20
2K
0.105
2.09
37
74
20
5K
0.085
4.23
23
117
20
10K
0.069
6.84
17
166
20
20K
0.058
11.5
12
235
20
35K
0.058
20.0
8.8
310
20
4.0
3.5
3.0
0
25
50
75
100
AMBIENT TEMPERATURE IN °C
Revision: 05-Apr-13
125
Document Number: 57034
80
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 122
www.vishay.com
Vishay Spectrol
1 1/16" (27 mm) Single Turn Wirewound
Precision Potentiometer
FEATURES
• Gangable up to 6 sections
• Extra taps on request
• Bushing or servo mount types available
• Ohmic value range: 5  up to 100 k
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn wirewound
Output by turrets
Professional
1 1/16" (27 mm)
Dimensions
ELECTRICAL SPECIFICATIONS
PARAMETER
SPECIAL
to 30 k
±1%
±3%
BEST PRACTICAL
± 0.50 %
± 0.35 %
± 0.25 %
± 0.20 %
STANDARD
5  to 20 k
±3%
±5%
STANDARD
± 1.0 %
± 0.5 %
± 0.5 %
± 0.5 %
Total resistance
Tolerance: 20  and above
Below 20 
Linearity (independent):
5  to 200 
200  to 2 k
2 k to 10 k
10 k and above
Noise
Electrical angle
Power rating
Section 1:
Additional sections:
Insulation resistance
Dielectric strength
Absolute minimum resistance
100  ENR
350° ± 2°
1.50 W at 70 °C ambient, derated to zero at 125 °C
75 % of the rating of section 1 (1.125 W at 70 °C)
1000 M minimum, 500 VDC
1000 VRMS 60 Hz
Linearity x total resistance or 0.5 , whichever is greater
Linearity x total applied voltage for total resistance above 20 ,
2.0 % of total applied voltage for 20  and below
Additional sections phased to section 1 within ± 1°
9 available as special standard tolerance ± 1°
End voltage
Phasing (CCW end points)
Taps (extra)
ORDERING INFORMATION/DESCRIPTION
The Model 122 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
122
B
1
5K
BO1
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS TOTAL RESISTANCE OF
PACKAGING
EACH SECTION
B: Bushing
S: Servo
Beginning with the section
nearest the mounting end
Up to 6 sections
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
122
S
2
103
203
B01
MODEL
MOUNTING TYPE
NUMBER OF
SECTIONS
OHMIC VALUE
OHMIC VALUE
PACKAGING
Servo
2
Section N° 1
103 = 10K
Section N° 2
203 = 20K
Box of 1 piece
Revision: 08-Apr-13
Document Number: 57036
81
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 122
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 122B/122-1...
± 0.010
± 0.031
0.687
(17.45)
1
0.875
(22.22)
0.375
(9.52)
± 0.015
3
0.308 MIN.
(7.82)
30°
TYP.
Ø 0.1248 - 0.0003
(3.17)
2
Ø 0.4062
(10.32)
Ø 1.062
(26.97)
1
+ 0.0000
0.062
(1.57)
+ 0.0000
- 0.0010
± 0.015
3/
8
0.735 R MAX.
(18.67)
- 32 UNEF - 2A
MTG. FACE
SERVO MOUNT: 122S/122-2...
0.308 MIN.
(7.82)
± 0.031
0.500
(12.70)
0.062
(1.57)
0.062
(1.57)
1
0.687
(17.45)
1
± 0.010
0.062
(1.57)
+ 0.0000
Ø 0.9688 - 0.0005
(24.61)
Ø 1.062
(26.97)
ADD 0.500 ± 0.002 (12.70) FOR EACH
ADDITIONAL SECTION
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
± 0.015
2
1
+ 0.0000
Ø 0.968 MAX.
(24.58)
Ø 0.1248 - 0.0003
(3.17)
CW
3
SCHEMATIC
MTG. FACE
MATERIAL SPECIFICATIONS
Housing and lids
Aluminum, anodized
Shaft
Stainless steel, non-magnetic
non-passivated
Terminals
Brass, plated for solderability
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
Revision: 08-Apr-13
Steel, nickel plated
Brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
Vibration
Shock
Salt spray
Rotational life
Load sife
Temperature range
15 g thru 2000 CPS
50 g
96 h
1 million shaft revolutions
900 h
- 55 °C to + 125 °C
MARKING
Unit
identification
Units shall be marked with Vishay Spectrol
name and model number resistance and
resistance tolerance, linearity, terminal
identification and data code.
Example of a marking for a standard part:
122-11502
Document Number: 57036
82
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 122
www.vishay.com
Vishay Spectrol
POWER RATING CHART
RESISTANCE ELEMENT DATA
(Ratings for cup No. 1.Additional cups 75 % of values
shown)
RESISTANCE RESO- OHMS
VALUES
LUTION PER
()
(%)
TURN
6
RATED POWER IN W
5
4
3
2
1
SPECIAL 150 °C
STANDARD 125 °C
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
MAXIMUM MAXIMUM
WIRE
CURRENT VOLTAGE
TEMP.
ACROSS
AT 70 °C
COEF.
COIL
AMBIENT
(ppm/°C)
(V)
(mA)
5
0.364
0.018
548
2.74
800
10
0.311
0.031
387
3.87
800
20
0.250
0.050
274
5.48
180
50
0.232
0.116
173
8.65
180
100
0.232
0.231
122
12.2
20
200
0.194
0.389
86.6
17.3
20
500
0.168
0.841
54.8
27.4
20
1K
0.156
1.557
38.7
38.7
20
2K
0.109
2.178
27.4
54.8
20
5K
0.088
4.382
17.3
86.5
20
10K
0.076
7.644
12.2
122
20
20K
0.071
14.235
8.66
173
20
50K
0.062
30.921
5.48
274
20
100K
0.052
51.983
3.87
387
20
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
360° continuous
Servo mount: ball bearing
Bushing mount: sleeve bearing
Bearing type
Torque (maximums)
Servo, 1 section
Bushing, 1 section
Each additional section
Mechanical runouts (maximums):
Shaft runout (TIR/in)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Weight (maximums):
Single section
Each additional section
Ganging
Moment of inertia
Revision: 08-Apr-13
STARTING
0.25 oz. - in (18.0 g - cm)
0.30 oz. - in (21.6 g - cm)
0.20 oz. - in (14.4 g - cm)
RUNNING
0.15 oz. - in (10.8 g - cm)
0.25 oz. - in (18.0 g - cm)
0.15 oz. - in (10.8 g - cm)
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
0.8 oz. (22.7 g)
0.4 oz. (11.3 g)
6 sections maximum, terminal alignment, added sections within ± 10° of section 1 terminals
0.12 g - cm2 per section maximum
Document Number: 57036
83
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 132
www.vishay.com
Vishay Spectrol
1 5/16" (33.3 mm) Low Cost Industrial Single Turn
Wirewound, Bushing Mount Type Potentiometer
FEATURES
• Suitable model for all industrial applications
• Center tap available
• Continuous rotation and mechanical stops
both standard
• Large electrical angle: 352° ± 2°
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
ROTATIONAL, single turn wirewound
Output by turrets
Industrial
1 5/16" (33.3 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
MIL-PRF-12934 TEST PROCEDURES APPLY
STANDARD
SPECIAL
5  to 20 k
to 35 k
±3%
±1%
±5%
±3%
STANDARD
BEST PRACTICAL
Total Resistance
Tolerance: 50  and Above
Below 50 
Linearity (independent)
Total Resistance
5  to 20 
20  to 200 
200  and above
Noise
Power Rating
± 1.0 %
± 1.0 %
± 0.5 %
± 0.75 %
± 0.50 %
± 0.25 %
100  ENR
40 °C ambient
2.75 W
derated to zero at 125 °C
Electrical Angle
Continuous Rotation
Stops
Insulation Resistance
Dielectric Strength
Absolute Minimum Resistance
Minimum Voltage
Temperature Coefficient of Resistance
352° ± 2°
340° ± 5°
1000 M minimum at 500 VDC
1000 VRMS, 60 Hz
1.0 % of total resistance or 0.5 W whichever is greater
0.5 % maximum
Refer to standard resistance element data
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing
Rear Lid
Shaft
Vibration
Shock
Salt Spray
Rotational Life
Shaft Revolutions
Operating Temperature Range
Terminals
Mount Hardware
Lockwasher Internal Tooth:
Panel Nut:
Molded glass filled thermoplastic
Glass filled thermoset plastic
Stainless steel, non-magnetic
Brass, plated for solderability,
Non-passivated
Steel, nickel plated
Brass, nickel plated
15 g thru 2000 Hz
50 g
48 h
500 000
- 55 °C to + 125 °C
ORDERING INFORMATION/DESCRIPTION
132
0
20K
BO10
OTHER OPTIONAL
MODEL
OHMIC VALUE
PACKAGING
FEATURES
0. Standard (end taps)
0. Continuous
1. Center tap (within
Box of 10 pieces
2. Stops
5° of electrical center)
Other characteristics will be standard as described on this specification sheet. If special characteristics are required such as special linearity
tolerance, special resistance tolerance, non-linear functions, etc., please state these on your order.
Revision: 12-Apr-13
B
BUSHING
MOUNT
0
MECHANICAL
OPTIONS
Document Number: 57096
84
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 132
www.vishay.com
Vishay Spectrol
SAP PART NUMBERING GUIDELINES
132
MODEL
B
STYLE
2
MECHANICAL
OPTIONS
2: With stops
1
ELECTRICAL
OPTIONS
1: With center tap
103
OHMIC VALUE
B10
PACKAGING
103: 10K
Box of 10 pieces
DIMENSIONS in inches (millimeters)
± 0.031
MODEL 132B/132-...
± 0.015
60°
Ø 0.500
(12.70)
BC
0.187
(4.75)
± 0.015
± 0.015
0.625
(15.88)
0.875
(22.22)
+ 0.0000
Ø 0.4062 - 0.0020
MTG. (10.32)
± 0.015
0.375
(9.52)
± 0.010
0.032
(0.81)
0.062
(1.57)
+ 0.0000
Ø 0.2497 (6.34) - 0.0003
0.030 MAX. (0.76)
0.562 (14.27)
± 0.015
Ø 1.312
(33.32)
0.032 (0.81)
3/
8
- 32 UNEF - 2A
Ø 0.125 (3.18)
2
0.062 (1.57)
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
CW
3
1
MTG. SURFACE
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing Type
360° (continuous) or 340° ± 5° (stops)
Sleeve
STARTING
RUNNING
1.0 oz. - in (72 g - cm)
0.7 oz.- in (50.40 g - cm)
Torque (maximums)
Runouts (maximums)
Shaft Runout (TIR)
Pilot Dia. Runout (TIR)
Lateral Runout (TIR)
Shaft End Play
Shaft Radial Play
Weight
Stop Strength
0.002" (0.05 mm)
0.003" (0.08 mm)
0.005" (0.13 mm)
0.008" (0.20 mm)
0.003" (0.08 mm)
1.0 oz. maximum (28.35 g)
8.0 in - lbs (9.21 kg - cm) (stops version only)
POWER RATING CHART
RESISTANCE ELEMENT DATA
RATED POWER IN W
6.0
RESISTANCE RESO- OHMS
VALUES
LUTION PER
()
TURN
(%)
5.0
4.0
3.0
2.0
1.0
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
MARKING
Unit
Identification
Units shall be marked with Vishay Spectrol
name, model number, resistance and
tolerance, linearity, terminal identification, and
data code Applicable test procedures:
MIL-R-12934.
Example of a marking for a standard part:
132-0-0-103
Revision: 12-Apr-13
5
10
20
50
100
200
500
1K
2K
5K
10K
20K
35K
0.419
0.327
0.280
0.290
0.251
0.212
0.161
0.150
0.132
0.107
0.080
0.067
0.057
0.021
0.032
0.056
0.145
0.251
0.424
0.806
1.50
2.64
5.34
7.98
13.4
20.0
MAXIMUM
CURRENT
AT 40 °C
AMBIENT
(mA)
742
524
371
234
166
122
74.2
52.4
37.1
23.4
16.6
12.2
8.88
MAXIMUM
WIRE
VOLTAGE
TEMP.
ACROSS
COEF.
COIL
(ppm/°C)
(V)
3.71
800
5.24
800
7.42
800
11.7
20
16.6
20
24.4
20
37.1
20
52.4
20
74.2
20
117
20
166
20
244
20
311
20
Document Number: 57096
85
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 140
www.vishay.com
1/
Vishay Spectrol
2"
(12.7 mm) Single - Turn Wirewound
Bushing Mount Type Precision Potentiometer
FEATURES
• Ohmic value range: 50  up to 20 k
• Smallest size available: 12.7 mm
• Mechanical stops on request
• High torque and sealed versions available
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, single turn wirewound
Output by turrets
Professional
1/ "
2
Dimensions
(12.7 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
50  to 20 k
±5%
Linearity x total resistance or
0.5 , whichever is greater
± 1.0 %
100  ENR
2 W at 40 °C ambient derating linearly to zero at 125 °C
1000 M min. 500 VDC
1000 VRMS, 60 Hz
320° ± 5°
Linearity x total applied voltage for total resistance above 20 ;
2.0 % of total applied voltage for 20  and below
Total Resistance
Tolerance
Absolute Minimum Resistance
Linearity (Independent)
Noise
Power Rating
Insulation Resistance
Dielectric Strength
Electrical Angle
End Voltage
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Vibration
Stainless steel, non magnetic
non-passivated
Shaft
Housing
Aluminum, anodized
Rear Lid
Molded glass filled
thermoset plastic
Terminals
Brass, gold plated
Mounting Hardware
Lockwasher Internal Tooth:
Panel Nut:
20 g thru 2000 Hz
Shock
50 g
Salt Spray
96 h
500 000
shaft revolutions
Rotational Life
Load Life
900 h
Temperature Range
Steel, nickel plated.
Brass, nickel plated
- 55 °C to + 125 °C (operating)
ORDERING INFORMATION/DESCRIPTION
140B
0
0
20K
BO10
MODEL
MECHANICAL OPTIONS
SPECIAL FEATURE
OHMIC VALUE
PACKAGING
0. Stops, slotted shaft (std)
1. Plain shaft
2. Shaft lock
3. Continuous rotation
4. Combination 1 and 2
5. Combination 1 and 3
6. Combination 2 and 3
7. Combination 1, 2 and 3
0. Standard torque
1. Center tap (10K max. Rt)
2. High torque
3. Sealed construction
4. Combination 1 and 2
5. Combination 1 and 3
6. Combination 2 and 3
7. Combination 1, 2 and 3
Box of 10 pieces
SAP PART NUMBERING GUIDELINES
140B
7
0
103
B10
MODEL
MECHANICAL OPTION
FEATURE
OHMIC VALUE
PACKAGING
From 0 to 7
From 0 to 7
103 = 10K
Box of
10 pieces
Revision: 08-Apr-13
Document Number: 57097
86
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 140
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
0.062 WIDE
IMPERFECT
THR’O AREA
+ 0.0000
1/4 - 32
UNEF - 2A
THREAD
+ 0.000
- 0.003
120°
TYP.
0.133 R
(3.38)
0.32
(0.81)
CW
0.152
(3.86)
0.056
(1.42)
0.305
(7.75)
MODEL 140B/140-...
Ø 0.250 MTG. (6.10)
± 0.015
0.312
(7.92)
0.031
(0.79)
Ø 0.1248 - 0.0003
(3.17)
Ø 0.500
(12.70)
0.187
(4.75)
0.031
(0.79)
Ø 0.062
(1.57)
± 0.010
0.700 (17.78)
MTG. FACE
SHAFT LOCK OPTION
CENTER TAP OPTION
0.500
(12.70)
150°
60°
INTEGRAL SHAFT LOCK
0.218
TOLERANCES: UNLESS
OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2 °
CENTER TAP AVAILABLE AS
SPEC STANDARD FEATURE
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing Type
Torque (maximums)
Starting
Running
Dead Zone
Weight
Stop Strength
Runouts (maximum)
Shaft (TIR)
Pilot Dia. (TIR)
Lateral (TIR)
Shaft End Play
Shaft Radial Play
330° ± 5°
SLEEVE BEARING
0.2 oz. - in (14.40 g - cm)
0.2 oz. - in (14.40 g - cm)
Not applicable
0.1 oz. maximum (2.84 g)
5 in - lbs (5.76 kg - cm) static
0.002" (0.05 cm)
0.002" (0.05 cm)
0.003" (0.08 cm)
0.006" (0.15 cm)
0.003" (0.08 cm)
RATED POWER IN W
POWER RATING CHART
2
RESISTANCE ELEMENT DATA
STD
RESISTANCE
VALUES
()
1
MAXIMUM MAXIMUM
WIRE
RESO- OHMS CURRENT VOLTAGE
TEMP.
ACROSS
AT 40 °C
LUTION PER
COEF.
COIL
(%)
TURN AMBIENT
(ppm/°C)
(V)
(mA)
50
0.542
0.271
200.0
10.0
20
100
0.431
0.431
141.0
14.1
20
200
0.361
0.722
100.0
20.0
20
500
0.312
1.56
63.2
31.6
20
1K
0.255
2.55
44.7
44.7
20
2K
0.197
3.94
31.6
63.2
20
0
0
20
40
60
80 100 120 140 160
AMBIENT TEMPERATURE IN °C
MARKING
Unit
Identification
Units shall be marked with manufacturer’s
name, model number, resistance value and
tolerance, circuit diagram, terminal
identification, linearity and data code.
Example of a marking for a standard part:
140-1-2-103
Revision: 08-Apr-13
5K
0.170
8.50
20.0
100.0
20
10K
0.147
14.7
14.1
141.0
20
20K
0.105
21.0
10.0
200.0
20
Document Number: 57097
87
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 142
www.vishay.com
1/
Vishay Spectrol
2"
(12.7 mm) Single - Turn Wirewound
Servo Mount Type Precision Potentiometer
FEATURES
• Ohmic value range: 50  up to 20 k
• Smallest size available: 12.7 mm
• Center tap on request
• Custom shafts available on request
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn wirewound
Output by turrets
Professional
1/ "
2
Dimensions
(12.7 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
50  to 20 k
Total Resistance
Tolerance
±5%
Linearity x total resistance or
0.5 , whichever is greater
Absolute Minimum Resistance
Linearity (independent)
± 1.0 %
100  ENR
Noise
Power Rating
2 W at 40 °C ambient derating linearly to zero at 125 °C
Insulation Resistance
1000 M min. 500 VDC
Dielectric Strength
1000 VRMS, 60 Hz
Electrical Angle
350° + 0° - 4°
Linearity x total applied voltage for total resistance above 20 ;
2.0 % of total applied voltage for 20  and below
End Voltage
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Vibration
Stainless steel, non magnetic
non-passivated
Shaft
20 g thru 2000 Hz
Shock
Housing
Aluminum, anodized
Rear Lid
Molded glass filled
thermoset plastic
Rotational Life
Terminals
Brass, gold plated
Load Life
50 g
Salt Spray
96 h
500 000
shaft revolutions
900 h
Temperature Range
- 55 °C to + 125 °C (operating)
ORDERING INFORMATION/DESCRIPTION
142S
MODEL
0
MECHANICAL OPTIONS
0. Continuous rotation,
plain shaft (std.)
0
10K
BO10
SPECIAL FEATURE
OHMIC VALUE
PACKAGING
0. Standard torque
1. Center tap (10K max. Rt)
Box of 10 pieces
SAP PART NUMBERING GUIDELINES
142S
0
1
502
B10
MODEL
MECHANICAL OPTIONS
SPECIAL FEATURE
OHMIC VALUE
PACKAGING
1: With center tap
502 = 5K
Box of
10 pieces
Revision: 08-Apr-13
Document Number: 57039
88
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 142
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
MODEL 142S/142-...
120° TYP
150°
0.133 R
(3.38)
Ø 0.375
(9.52)
0.32
(0.81)
CW
0.062
(1.57)
0.062 (1.57)
0.152
(3.86)
0.625
(15.88)
+ 0.010
0.500
(12.70)
0.062 (1.57)
MTG FACE
Ø 0.500
(12.70)
TOLERANCES: UNLESS
OTHERWISE NOTED,
± 0.005, ANGLES ± 2°
± 0.0005
DECIMALS
Ø 0.4370 MTG
60°
+ 0.000
(11.10)
CENTER TAP AVAILABLE AS
- 0.0003
SPEC STANDARD FEATURE
Ø 0.1248
(3.17)
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
360° continuous
Bearing Type
Torque (maximums)
Starting
Running
Dead Zone
BALL BEARING
0.075 oz. - in (5.40 g - cm)
0.05 oz. - in (3.60 g - cm)
0.20 oz. - in (14.40 g - cm)
Weight
0.3 oz. (8.50 g) maximum
Runouts (maximum)
Shaft (TIR)
Pilot Dia. (TIR)
Lateral (TIR)
Shaft End Play
Shaft Radial Play
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.004" (0.10 cm)
0.002" (0.05 cm)
RATED POWER IN W
POWER RATING CHART
RESISTANCE ELEMENT DATA
2
STD
RESISTANCE
VALUES
()
1
0
0
20
40
60
80 100 120 140 160
AMBIENT TEMPERATURE IN °C
MARKING
Unit
Identification
Units shall be marked with manufacturer’s
name, model number, resistance value and
tolerance, circuit diagram, terminal
identification, linearity and data code.
Example of a marking for a standard part:
142-0-1-102
Revision: 08-Apr-13
MAXIMUM MAXIMUM
WIRE
RESO- OHMS CURRENT VOLTAGE
TEMP.
ACROSS
AT 40 °C
LUTION PER
COEF.
COIL
(%)
TURN AMBIENT
(ppm/°C)
(V)
(mA)
50
0.542
0.271
200.0
10.0
20
100
0.431
0.431
141.0
14.1
20
200
0.361
0.722
100.0
20.0
20
500
0.312
1.56
63.2
31.6
20
1K
0.255
2.55
44.7
44.7
20
2K
0.197
3.94
31.6
63.2
20
5K
0.170
8.50
20.0
100.0
20
10K
0.147
14.7
14.1
141.0
20
20K
0.105
21.0
10.0
200.0
20
Document Number: 57039
89
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 152
www.vishay.com
7/
8"
Vishay Spectrol
(22.2 mm) Single Turn Wirewound,
Precision Potentiometer
FEATURES
• Rugged, high-quality, all metal housing
• Short length behind panel 11/32" (8.76 mm)
• Ohmic value range: 5  to 40 k
• Extra taps available
• Bushing and servo mount types
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn wirewound
Output by turrets
Industrial
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Standard Range
5  to 20 k - special to 40 k
Tolerance
50  and Above:
Below 50 
STANDARD
±3%
±5%
SPECIAL
±1%
±3%
Linearity (Independent)
Total Resistance
5  to 100 
100  to 500 
500  and Above
STANDARD
± 1.0 %
± 1.0 %
± 0.5 %
BEST PRACTICAL
± 0.75 %
± 0.50 %
± 0.35 %
100  ENR
Noise
2W
derated to zero at 125 °C
Power Rating (at 40 °C Ambient)
Electrical Angle
340° ± 2°
Insulation Resistance
1000 M minimum 500 VDC
Dielectric Strength
1000 VRMS, 60 Hz
Not to exceed linearity times total resistance
or 0.5 W whichever is greater
Absolute Minimum Resistance
Minimum Voltage
0.5 % max.
Temperature Coefficient of Resistance
Refer to standard resistance element data
ORDERING INFORMATION/DESCRIPTION
152
S
10K
BO10
MODEL
MOUNTING
OHMIC VALUE
PACKAGING
B: Bushing
S: Servo
Box of 10 pieces
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity, special
resistance tolerance, high torque, 1/8 shaft - 1/4 - 32 bushing, stops, non - linear functions, etc., state these on your order.
SAP PART NUMBERING GUIDELINES
152
B
502
B10
MODEL
MOUNTING TYPE
OHMIC VALUE
PACKAGING
B: Bushing
502 = 5K
Box of 10 pieces
Revision: 08-Apr-13
Document Number: 57098
90
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 152
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT TYPE: 152B/152-1...
SERVO MOUNT TYPE: 152S/152-2...
MOUNTING SURFACE
± 0.031
0.875
(22.22)
± 0.010
0.365
(9.27)
± 0.015
0.345
(8.76)
± 0.015
0.030 MAX.
(0.76)
0.455 (11.56)
0.062 (1.57)
Ø 0.375 (9.52) X 0.062 (1.57)
WIDE IMPERFECT THR’D AREA
0.062 (1.57)
0.062 (1.57)
± 0.010
0.125
(3.18)
90°
+ 0.0000
- 0.0003
Ø 0.2497
(6.34)
Ø 0.875
(22.22)
0.020 MAX.
(0.51)
+ 0.0000
- 0.0005
Ø 0.750
MAX.
(19.05)
0.312
(7.92)
Ø 0.350 MAX.
(8.89)
3/ - 32 UNEF - 2A
8
Ø 0.7500
(19.05)
Ø 0.875
(22.22)
+ 0.0000
0.190 TERMINAL RADIUS
(4,83)
0.1248 Ø - 0.0003
(3.17)
± 0.031
0.500
(12.70)
Ø 0.200 MAX.
(5.08)
MOUNTING SURFACE
Ø 0.062 (1.57) x 0.062 HIGH
(1.57) LOCATING PIN
2
1
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
CW
3
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
360° continuous
Servo mount: Ball bearing
Bearing Type
Bushing mount: Sleeve bearing
Torque (Maximums)
STARTING
RUNNING
Servo
0.25 oz. - in (18.00 g - cm)
0.15 oz. - in (10.80 g - cm)
Bushing
0.30 oz. - in (21.60 g - cm)
0.25 oz. - in (18.00 g - cm)
Mechanical Runouts (Maximums)
Shaft Runout
Pilot Dia. Runout
Lateral Runout
BUSHING
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
-
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
Shaft End Play
0.006" (0.15 cm)
0.005" (0.13 cm)
Shaft Radial Play
0.003" (0.08 cm)
0.002" (0.05 cm)
Weight
Revision: 08-Apr-13
0.5 oz. maximum (14.18 g)
Document Number: 57098
91
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 152
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing
Vibration
Aluminum, anodized
Stainless steel, non-magnetic
non-passivated
Shaft
15 g thru 2000 Hz
Shock
50 g
Salt Spray
96 h
Rear Lid
Molded glass filled phenolic
Rotational Life Shaft
Revolution:
Terminals
Brass, plated for solderability
Load Life
Steel, nickel plated
Brass, nickel plated
RATED POWER IN W
- 55 °C to - + 125 °C
MARKING
POWER RATING CHART
Unit
Identification
4
Servo
2 million
900 h
Operating Temperature Range
Bushing Mount Hardware
Lockwasher Internal Tooth:
Panel Nut:
Bushing
1 million
Units shall be marked with Vishay Spectrol
name, model number, resistance and
tolerance, linearity terminal identification and
data code.
Applicable test procedures: MIL-R-12934
Example of a marking for a standard part:
152-11202
3
2
1
0
0
20
40
60
80 100 120 140 160
AMBIENT TEMPERATURE IN °C
Revision: 08-Apr-13
Document Number: 57098
92
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 202
www.vishay.com
Vishay Spectrol
1 3/4" (44.5 mm) Single Turn Wirewound
Precision Potentiometer
FEATURES
• Large range of ohmic values: 5  to 65 k
• Screw, servo or bushing mount types available
• Up to 6 sections on the same shaft
• Extra taps upon request
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn wirewound
Output by turrets
Professional
Dimensions
1 ¾" (44.5 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
SPECIAL
65 k
±1%
±3%
STANDARD
5  to 50 k
±3%
±5%
Total Resistance
Tolerance: 50  and above
Below 50 
Absolute Minimum Resistance
Linearity x total resistance or 0.5 , whichever is greater
End Voltage
Linearity x total applied voltage for total resistance above
20 , 2.0 % of total applied voltage for 20  and below
BEST PRACTICAL
± 0.50 %
± 0.35 %
± 0.20 %
± 0.15 %
STANDARD
± 1.00 %
± 0.50 %
± 0.25 %
± 0.25 %
Linearity (independent)
5  to 50 
50  to 500 
500  to 2 k
2 k and above
100  ENR
Noise
Electrical Angle
350° ± 2°
Power Rating:
Section 1 : 3.5 W
Additional Sections
70 °C ambient derated to zero at 125 °C
75 % of the rating of section 1 (2.6 W at 70 °C)
Insulation Resistance
1000 M minimum, 500 VDC
Dielectric Strength
1000 VRMS, 60 Hz
Taps (extra)
From 1 up to 19 (max.)
Phasing (CCW end points)
Additional sections phased to section 1 within ± 1°
ORDERING INFORMATION/DESCRIPTION
202
C
1
50K
BO1
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS
OHMIC VALUE
PACKAGING
B: Bushing
S: Servo
C: Screw
From 1 up to 6 (max.)
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
202
S
1
503
B01
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS
OHMIC VALUE
PACKAGING
503 = 50K
Box of 1 piece
Servo
Revision: 09-Apr-13
Document Number: 57052
93
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 202
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
SCREW MOUNT: 202C/202-3
3
± 0.010
0.800
(20.32)
1
± 0.031
1
16°, 20°
TYP.
0.625
(15.88)
2
+ 0.000
MTG. - 0.0005
Ø 0.7500
(19.05)
0.062
(1.57)
+ 0.000
Ø 0.2497 - 0.0003
(6.34)
0.312 MIN.
(7.92)
1.075 R
(27.30)
MAX.
45°
± 5°
± 0.015
Ø 1.750
(44.45)
6.32 UNC-2BX 187 ± 0.015 DEEP
(4.75) 2 PLACES ON 1.000 Ø B.C.
(25.40)
1.015
(25.75)
MAX.
MTG. FACE
BUSHING MOUNT: 202B/202-1
SERVO MOUNT: 202S/202-2
± 0.010
0.831
(21.11)
1
± 0.010
± 0.031
0.625
(15.88)
1
0.073 MIN.
(1.85)
0.093
(2.36)
0.062
(1.57)
0.340 MIN.
(8.64)
0.705
(17.91)
± 0.031
0.875
(22.22)
± 0.015
0.375
(9.52)
0.239 MIN.
(6.07)
+ 0.0000
Ø 0.2497 - 0.0003
(6.34)
0.062
(1.57)
+ 0.0000
Ø 0.4062 - 0.0010
MGT.
(10.32)
+ 0.0000
- 0.0005
Ø 1.5620
MTG.
(39.67) Ø 1.750± 0.015
(44.45)
± 0.015
Ø 1.750
(44.45)
± 0.015
Ø 1.750
(44.45)
2
CW
3
1
Ø 1.562
MAX.
(39.67)
MTG. FACE
+ 0.0000
0.2497 - 0.0003
Ø
(6.34)
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
SCHEMATIC
MTG. FACE
1
3/ 8
32 UNEF-2A
ADD 0.500 ± 0.002 FOR EACH ADDITIONAL SECTION
(12.70)
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical Rotation
Bearing Type
Ganging
Torque (maximums)
1 Section Servo and Screw Types
Bushing, 1 Section
Each Additional Section
Mechanical Runouts (maximums):
Shaft Runout (TIR/in)
Pilot Dia. Runout (TIR)
Lateral Runout (TIR)
Shaft End Play
Shaft Radial Play
Moment of Inertia
Weight (maximums):
Single Section
Each Additional Section
Revision: 09-Apr-13
360° (continuous)
Screw and servo mount: Ball bearing
Bushing mount: Sleeve bearing
6 sections maximum, terminal alignment, added sections,
within ± 10° of section 1 terminals
RUNNING
STARTING
0.4 oz. - in (28.80 g - cm)
0.7 oz. - in (50.40 g - cm)
0.7 oz. - in (50.40 g - cm)
1.0 oz. - in (72.00 g - cm)
0.3 oz. - in (21.60 g - cm)
0.4 oz. - in (28.80 g - cm)
BUSHING
SERVO AND SCREW
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
0.002" (0.05 cm)
1.0 g - cm2 per section maximum
3.0 oz. (85.05 g)
1.0 oz. (28.35 g)
Document Number: 57052
94
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 202
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing and Lids
Vibration
Aluminum, anodized
Shaft And Clamp Rings
Stainless steel, non-magnetic
non-passivated
Terminals
Brass, plated for solderability
Bushing Mount Hardware
Lockwasher Internal Tooth:
Panel Nut:
Steel, nickel plated
Brass, nickel plated
15 g thru 2000 Hz
Shock
50 g
Salt Spray
96 h
Rotational Life
MARKING
Units shall be marked with Vishay Spectrol
name, model number and data code on each
section, resistance, resistance tolerance,
linearity and terminal identification.
Example of a marking for a standard part:
202-22103 102
Unit
Identification
1 million shaft revolutions
Load Life
900 h
Operating Temperature Range
- 55 °C to + 125 °C
RESISTANCE ELEMENT DATA
POWER RATING CHART
RATED POWER IN W
MAXIMUM MAXIMUM
CURRENT VOLTAGE
TEMP.
ACROSS
AT 70 °C
COEF.
COIL
AMBIENT
(ppm/°C)
(V)
(mA)
STANDARD
RESISTANCE
VALUES
()
RESOLUTION
(%)
OHMS
PER
TURN
5
0.320
0.016
835
4.19
800
10
0.240
0.024
591
5.92
800
20
0.190
0.038
418
8.37
800
50
0.212
0.106
264
13.3
20
100
0.181
0.181
187
18.7
20
200
0.150
0.300
133
26.3
20
500
0.115
0.575
83.4
42.0
20
1K
0.103
1.03
59.1
59.2
20
2
2K
0.094
1.89
41.8
83.7
20
5K
0.068
3.42
26.4
133
20
0
10K
0.059
5.91
18.7
187
20
20K
0.048
9.52
13.2
265
20
50K
0.044
22.0
8.37
422
20
(Ratings for cup No. 1.
Additional cups 75 % of values shown)
8
6
SPECIAL 150 °C
4
STANDARD 125 °C
20
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
Revision: 09-Apr-13
160
Document Number: 57052
95
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 302
www.vishay.com
Vishay Spectrol
2" (50.8 mm) Single Turn Wirewound
Precision Potentiometer
FEATURES
• Screw, servo and bushing mount types
available
• Large range of ohmic values: 5  to 85 k
• Extra taps upon request
• Gangable up to 6 sections on a same shaft
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn wirewound
Output by turrets
Professional
Dimensions
2" (50.8 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
SPECIAL
STANDARD
85 k
5  to 50 k
±1%
±3%
±3%
±5%
Linearity x total resistance or 0.5  whichever is greater
Linearity x total applied voltage for total resistance above 20 , 2.0 % of total applied voltage
for 20  and below
BEST PRACTICAL
STANDARD
± 0.50 %
± 1.0 %
± 0.35 %
± 0.50 %
± 0.20 %
± 0.25 %
± 0.15 %
± 0.25 %
± 0.10 %
± 0.25 %
100  ENR
350° ± 2°
Total resistance:
Tolerance 50  and above
Below 50 
Absolute ninimum resistance
End voltage
Linearity (independent)
5  to 50 
50  to 200 
200  to 1 k
1 k to 10 k
10 k and above
Noise
Electrical angle
Power rating
Section 1: 4.0 W
Additional sections
Insulation resistance
Dielectric strength
Taps (extra)
Phasing (CCW end points)
70 °C ambient derated to zero at 125 °C
75 % of the rating of section 1 (3.0 W at 70 °C)
1000 M minimum 500 VDC
1000 VRMS, 60 Hz
21 available as special, standard tolerance ± 1°
Additional sections phased to section 1 within ± 1°
ORDERING INFORMATION/DESCRIPTION
302
C
1
501
BO1
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS
OHMIC VALUE
PACKAGING
B: Bushing
S: Servo
C: Screw
From 1 up to 6 (max.)
500 
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
302
S
2
103
202
BO1
MODEL
MOUNTING
TYPE
NUMBER OF
SECTIONS
OHMIC VALUE
OHMIC VALUE
PACKAGING
Section N° 1
103 = 10K
Section N° 2
202 = 2K
Box of
1 piece
S: Servo
Revision: 17-Apr-13
Document Number: 57057
96
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 302
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
± 0.010
SCREW MOUNT: 302C/302-3
± 0.031
0.800
(20.32)
1
0.625
(15.88)
15° TYP.
3
0.062
(1.57)
0.312 MIN.
(7.92)
1
2
1.200 R MAX.
(30.48)
± 5°
45°
+ 0.0000
- 0.0005
Ø 0.7500
(19.05)
8 - 32 UNC - 2B
0.187 DEEP
(4.75) 3 HOLES
EQUALLY
SPACED
± 0.015
Ø 2.000
(50.80)
± 0.005
+ 0.0000
0.2497 - 0.0003
Ø
(6.34)
MTG. FACE
1.140 R MAX.
(28.96)
Ø 1.250 B.C
(31.75)
SERVO MOUNT: 302S/302-2
± 0.010
1
0.831
(21.11)
BUSHING MOUNT: 302B/302-1
± 0.031
± 0.010
0.625
(15.88)
0.705
(17.91)
0.073 MIN.
(1.85)
0.093
(2.36)
± 0.031
0.875
(22.22)
0.239 MIN.
(6.07)
± 0.015
0.340 MIN.
(8.64)
0.062
(1.57)
+ 0.0000
Ø 0.2497 - 0.0003
(6.34)
0.375
(9.52)
0.062
(1.57)
3/
8-
32 UNEF 2A
+ 0.0000
Ø 1.8750 - 0.0005
(47.62)
± 0.015
Ø 2.000
(50.80)
+ 0.0000
- 0.0010
Ø 2.000
(50.80)
Ø 0.4062
(10.32)
± 0.015
Ø 2.000
(50.80)
± 0.002
Ø 1.812
MAX. (46.02)
1
+ 0.0000
MTG. FACE
Ø 0.2497 - 0.0003
(6.34)
MTG. FACE
ADD 0.500 (12.70) FOR EACH ADDITIONAL SECTION
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
2
CW
3
1
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing type
Ganging
360° (continuous)
Servo and screw mount: ball
Bushing mount: sleeve
6 sections maximum, terminal alignment, added sections, within ± 10° of section 1 terminals
Torque (maximums)
Servo and screw (1 section)
Bushing (1 section)
Each added section
STARTING
1.0 oz. - in (72.00 g - cm)
1.7 oz. - in (122.42 g - cm)
0.6 oz. - in (43.21 g - cm)
RUNNING
0.5 oz. - in (36.00 g - cm)
1.0 oz. - in (72.00 g - cm)
0.4 oz. - in (28.80 g - cm)
Mechanical runouts (maximums)
Shaft (TIR/in)
Pilot dia. (TIR)
Lateral (TIR)
Shaft end play
Shaft radial play
SERVO AND SCREWING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
Moment of inertia
Weight (maximums)
Single section:
Each additional section:
Revision: 17-Apr-13
2.0 g - cm2 per section maximum
4.0 oz. (113.40 g)
1.2 oz. (34.02 g)
Document Number: 57057
97
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 302
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing and lids
Vibration
Aluminum, anodized
Shaft and clamp rings
Stainless steel, non-magnetic
non-passivated
Shock
Terminals
Brass, plated for solderability
Salt spray
15 g thru 2000 Hz
50 g
96 h
Rotational life
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
Steel, nickel plated
Brass, nickel plated
1 million shaft revolutions
Temperature range
- 55 °C to + 125 °C
MARKING
Units shall be marked with Vishay Spectrol name, model no and date code, and on each section,
resistance, resistance tolerance, linearity and terminal identification.
Example of a marking for a standard part: 302-11202
Unit identification
POWER RATING CHART
RESISTANCE ELEMENT DATA
RATED POWER IN W
(Ratings for cup No. 1. Additional cups 75 % of values
shown)
8
6
4
SPECIAL 150 °C
2
0
20
STANDARD 125 °C
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
Revision: 17-Apr-13
160
MAXIMUM MAXIMUM
WIRE
RESISTANCE RESO- OHMS CURRENT VOLTAGE
TEMP.
VALUES
LUTION PER AT 40 °C ACROSS
COEF.
COIL
()
(%)
TURN AMBIENT
(ppm/°C)
(V)
(mA)
5
0.320
0.016
893
4.48
800
10
0.200
0.020
633
6.32
800
20
0.165
0.033
447
8.95
800
50
0.148
0.074
283
14.1
800
100
0.151
0.151
200
20.0
20
200
0.126
0.252
141
28.4
20
500
0.115
0.573
89.4
44.7
20
1K
0.098
0.981
63.3
63.2
20
2K
0.085
1.70
44.7
89.5
20
5K
0.059
2.93
28.3
141
20
10K
0.051
5.16
20.0
200
20
20K
0.043
8.55
14.1
284
20
50K
0.032
15.80
8.94
447
20
Document Number: 57057
98
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 702
www.vishay.com
7/
8"
Vishay Spectrol
(22.2 mm) Single Turn Wirewound
(Precision Potentiometer)
FEATURES
• Large range of ohmic values: From 5  up to
100 k
• Bushing mount or servo mount types are
available
• Extra taps upon request
QUICK REFERENCE DATA
• Gangable up to 6 sections
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, single turn wirewound
Output by turrets
Professional
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance: (bushing 91 k max.)
Tolerance:
20  and above
Below 20 
STANDARD
5  to 20 k
SPECIAL
to 30 k
±3%
±5%
±1%
±3%
Linearity x total resistance or 0.5  whichever is greater
Absolute minimum resistance
Linearity x total applied voltage for total resistance above 20 , 2.0 % of total applied voltage
for 20  and below
End voltage
Linearity (independent)
5  to 100 
100  to 500 
500  to 5 k
5 k and above
STANDARD
± 1.0 %
± 1.0 %
± 0.5 %
± 0.5 %
BEST PRACTICAL
± 0.75 %
± 0.50 %
± 0.35 %
± 0.25 %
100  ENR
Noise
Electrical angle
350° ± 2°
Power rating
Section 1
Additional sections
1.25 W at 70 °C ambient derated to zero at 125 °C
75 % of the rating of section 1 (0.94 W at 70 °C)
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Taps (extra)
9 available as special, standard tolerance ± 2°
Phasing (CCW end points)
Additional sections phased to section 1 within ± 1°
ORDERING INFORMATION/DESCRIPTION
The model 702 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
702
B
1
20K
BO1
MODEL
MOUNTING TYPE
NUMBER OF SECTIONS
OHMIC VALUE
PACKAGING
B: Bushing
S: Servo
From 1 up to 6 sections
(max.)
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
702
S
2
050
100
B01
MODEL
MOUNTING
TYPE
NUMBER OF
SECTIONS
OHMIC VALUE
OHMIC VALUE
PACKAGING
Section No 1
050 = 5 
Section No 2
100 = 10 
Box of
1 piece
S: Servo
Revision: 03-May-13
Document Number: 57069
99
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 702
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
± 0.010
0.687
(17.45)
1
BUSHING MOUNT: 702B/702-1
± 0.031
0.500
(12.70)
0.308 MIN. TYP
(7.82)
Ø 0.4062 MTG.- 0.0010
(10.32)
0.062
(1.57)
3/
8
30°
TYP.
1
2
+ 0.0000
Ø 0.1248 - 0.0003
(3.17)
Ø 0.875
(22.22)
MTG. FACE
3
+ 0.0000
0.250
(6.35)
± 0.015
- 32 UNEF - 2A
± 0.010
0.687
(17.45)
1
R 0.640
(16.26)
MAX.
± 0.031
0.500
(12.70)
0.062
(1.57)
0.062
(1.57)
0.062
(1.57)
SERVO MOUNT: 702S/702-2
+ 0.0000
Ø 0.7500 - 0.0005
(19.05)
± 0.015
2
CW
0.875
(22.22)
Ø 0.875
(22.22)
3
1
SCHEMATIC
1
Ø 0.750
MAX.
(19.05)
+ 0.0000
MTG. FACE
ADD 0.500 (12.70) ± 0.002 FOR EACH
ADDITIONAL SECTION
Ø 0.1248 - 0.0003
(3.17)
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing type
Ganging
Torque (maximum)
Servo section 1
Bushing section 1
Each additional section
Mechanical runouts (maximums):
Shaft runout (TIR/In)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Moment of inertia
Weight:
Single section
Each additional section
Revision: 03-May-13
360° continuous
SERVO
Ball bearing
BUSHING
Sleeve bearing
6 sections maximum Terminal alignment, added sections within ± 10° of section 1 terminals
STARTING
0.10 oz. - in (7.20 g - cm)
0.25 oz. - in (18.00 g - cm)
0.10 oz. - in (7.20 g - cm)
RUNNING
0.085 oz. - in (6.12 g - cm)
0.20 oz. - in (14.40 g - cm)
0.075 oz. - in (5.40 g - cm)
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.004" (0.10 cm)
0.12 g - cm2 per section maximum
0.6 oz. (17.01 g)
0.2 oz. (5.67 g)
Document Number: 57069
100
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 702
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
Housing and lids
ENVIRONMENTAL SPECIFICATIONS
Aluminum, anodized
Shaft
Stainless steel, non-magnetic
non-passivated
Terminals
Brass, plated for solderability
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
Steel, nickel plated
Brass, nickel plated
Vibration
15 g thru 2000 CPS
Shock
50 g
Salt spray
96 h
Rotational life
MARKING
Unit
identification
Load life
Units shall be marked with Vishay Spectrol
name, model no and date code, and on each
section: resistance, resistance tolerance,
linearity and terminal identification.
Example of a marking for a standard part:
702-11502
POWER RATING CHART
(Ratings for cup No. 1. Additional cups 75 % of values shown)
RATED POWER IN W
3
2
1.5
1
0
20
1 million shaft revolutions
SPECIAL (150 °C)
STANDARD (125 °C)
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
Revision: 03-May-13
160
900 h
Operating temperature
range:
- 55 °C + 125 °C
RESISTANCE ELEMENT DATA
MAXIMUM MAXIMUM
WIRE
STANDARD
RESO- OHMS CURRENT VOLTAGE
TEMP.
RESISTANCE
LUTION PER AT 70 °C ACROSS
COEF.
VALUES
COIL
(%)
TURN AMBIENT
(ppm/°C)
()
(V)
(mA)
5
0.460
0.023
500
2.50
800
10
0.378
0.038
354
3.54
800
20
0.374
0.075
250
5.00
180
50
0.300
0.150
158
7.90
180
100
0.271
0.271
112
11.2
20
200
0.235
0.478
79.1
15.8
20
500
0.206
1.03
50.0
25.0
20
1K
0.156
1.56
35.4
35.4
20
2K
0.127
2.55
25.0
50.0
20
5K
0.101
5.07
15.8
79.0
20
10K
0.095
8.50
11.2
112.0
20
20K
0.090
17.9
7.90
158.0
20
50K
0.075
37.9
5.00
250.0
20
100K
0.065
64.5
3.54
354.0
20
Document Number: 57069
101
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Multiturn Models
Model 162 ............................. 103
Model 164 ............................ 105
Wirewound
Technology
Model 502 ............................ 107
Model 533, 534, 535 ............ 110
Model 536 ............................ 113
Model 552 ............................ 116
Model 802 ............................ 119
Model 830 ............................ 122
Multiturn Models
Model 852 ............................ 125
Model 860 ............................ 128
Model 162
www.vishay.com
1/
Vishay Spectrol
2"
(12.7 mm) Ten Turn Wirewound
Bushing Mount Precision Potentiometer
FEATURES
• Large range of ohmic values: 100  to 100 k
• Smallest size available on the market
• Very easy and accurate adjustment
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, multi turn wirewound
Output by turrets
Professional
1/ "
2
Dimensions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
(12.7 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Standard Range
Tolerance
STANDARD
100  to 100 k
±5%
SPECIAL
115 k
±1%
STANDARD
± 0.30 %
BEST PRACTICAL
± 0.15 %
Linearity (independent)
100  ENR
Noise
Electrical Angle
3600° + 15° - 0°
Power Rating
2.0 W at 40 °C ambient, derated to zero at 125 °C
Insulation Resistance
100 M minimum, 500 VDC
Dielectric Strength
500 VRMS, 60 Hz
Absolute Minimum Resistance
Linearity x total resistance or 0.5 , whichever is greater
End Voltage
Linearity x total applied voltage for total resistance above
20 , 2.0 % of total applied voltage for 20  and below
MATERIAL SPECIFICATIONS
Housing and Lids
Bushing
MARKING
Molded, glass filled, thermoset
plastic
Brass, nickel plated
Shaft
Unit
Identification
Stainless steel, non-passivated
Terminals
Brass, plated for solderability
Bushing Mount Hardware
Lockwasher Internal Tooth:
Panel Nut:
Steel, nickel plated
Brass, nickel plated
Units shall be marked with Vishay Spectrol
name and model no, resistance and resistance
tolerance, linearity, terminal identification and
date code
ENVIRONMENTAL SPECIFICATIONS
Vibration
15 g thru 2000 Hz
Shock
50 g
Salt Spray
Rotational Life
Temperature Range
48 h
500 000 shaft revolutions
- 55 °C to + 125 °C
ORDERING INFORMATION/DESCRIPTION
The Model 162 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
162
B
10K
BO5
MODEL
STYLE
(BUSHING)
TOTAL RESISTANCE
PACKAGING
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
162
B
103
B05
MODEL
STYLE
OHMIC VALUE
PACKAGING
Revision: 08-Apr-13
Document Number: 57043
103
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 162
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
MODEL 162B/162-1...
MTG. FACE
± 0.015
± 0.015
0.125
(3.18)
1.000
(25.40)
± 0.031
0.687
(17.45)
+ 0.000
Ø 0.0935 - 0.0003
(2.37)
+ 0.000
Ø 0.281- 0.001
(7.14)
± 0.015
0.281
(7.14)
0.040
(1.02)
3
CW
1
± 0.015
Ø 0.500
(12.70)
2
1/
4
- 32 UNEF-2A
SCREWDRIVER SLOT
0.025 WIDE (0.64) x 0.037 DEEP (0.94)
3 TERMINALS EQUALLY
SPACED ON A 0.300 Ø (7.62)
2
CW
1
3
SCHEMATIC
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical Rotation
3600°, + 15° - 0°
Sleeve
Bearing Type:
Torque (Maximum)
0.8 oz. - in (57.60 g - cm)
0.6 oz. - in (43.20 g - cm)
STARTING
RUNNING
Mechanical Runouts (maximums):
Shaft (TIR)
Pilot Dia. (TIR)
Lateral (TIR)
Shaft End Play
Shaft Radial Play
0.003" (0.08 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.010" (0.25 cm)
0.003" (0.08 cm)
Weight
0.3 oz. (8.50 g) maximum
Stop Strength
20 oz. - in (static) (1.44 kg - cm)
POWER RATING CHART
RATED POWER IN W
3.0
RESISTANCE ELEMENT DATA
MAXIMUM
STANDARD
RESO- OHMS CURRENT
RESISTANCE
LUTION PER
AT 40 °C
VALUES
(%)
TURN AMBIENT
()
(mA)
2.5
2.0
1.5
MAXIMUM
VOLTAGE
ACROSS
COIL
(V)
WIRE
TEMP.
COEF.
(ppm/°C)
100
0.092
0.092
141
14
20
1.0
200
0.069
0.138
100
20
20
0.5
500
0.049
0.245
63
32
20
1K
0.047
0.470
45
45
20
2K
0.038
0.763
32
64
20
5K
0.031
1.56
20
100
20
10K
0.025
2.55
14
140
20
20K
0.020
3.94
10
200
20
30K
0.018
5.34
8.2
246
20
50K
0.015
7.64
6.3
315
20
100K
0.013
13.2
4.5
450
20
0
0
25
50
75
100
125
150
AMBIENT TEMPERATURE IN °C
MARKING
Example of a marking for a standard part: 162-11103
Revision: 08-Apr-13
Document Number: 57043
104
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 164
www.vishay.com
1/
Vishay Spectrol
2"
(12.7 mm) Ten Turn Wirewound
Servo Mount Precision Potentiometer
FEATURES
• Large range of ohmic values: 100  to 100 k
• Smallest size available on the market
• Very easy and accurate adjustment
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, multi turn wirewound
Output by turrets
Professional
Dimensions
½" (2.7 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Standard Range
Tolerance
STANDARD
100  to 100 k
±5%
SPECIAL
115 k
±1%
STANDARD
± 0.30 %
BEST PRACTICAL
± 0.15 %
Linearity (independent)
100  ENR
Noise
Rotation
3600° + 15° - 0°
Power Rating:
Section 1:
2.0 W at 40 °C ambient, derated to zero at 125 °C
Insulation Resistance
100 M minimum, 500 VDC
Dielectric Strength
500 VRMS, 60 Hz
Absolute Minimum Resistance
Linearity x total resistance or 0.5 , whichever is greater
End Voltage
Linearity x total applied voltage for total resistance above
20 , 2.0 % of total applied voltage for 20  and below
MATERIAL SPECIFICATIONS
Housing and Lids
Front Lid
ENVIRONMENTAL SPECIFICATIONS
Molded, glass filled, thermoset
plastic
Aluminum, anodized
Shaft
Stainless steel, non-passivated
Terminals
Brass, plated for solderability
Vibration
15 g thru 2000 Hz
Shock
50 g
Salt Spray
48 h
Rotational Life
Temperature Range
500 000 shaft revolutions
- 55 °C to + 125 °C
MARKING
Unit Identification
Units shall be marked with Vishay Spectrol name and model no, resistance and resistance tolerance,
linearity, terminal identification and date code
ORDERING INFORMATION/DESCRIPTION
The Model 164 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
164
S
10K
BO5
MODEL
STYLE
(SERVO)
TOTAL RESISTANCE
PACKAGING
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
164
S
103
B05
MODEL
STYLE
OHMIC VALUE
PACKAGING
Revision: 08-Apr-13
Document Number: 57095
105
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 164
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
MODEL 164S/164-2...
MTG. FACE
± 0.015
± 0.031
1.125
(28.58)
0.125
(3.18)
3
CW
1
± 0.031
0.375
(9.52)
0.62
(1.57)
0.62
(1.57)
0.62
(1.57)
+ 0.000
Ø 0.375 - 0.001
(9.52)
± 0.015
Ø 0.500
(12.70)
Ø 0.500
(12.70)
2
+ 0.000
3 TERMINALS EQUALLY
SPACED ON A 0.300 Ø (7.62)
B.C.
Ø 0.375 - 0.010
(9.52)
+ 0.0000
Ø 0.0935 - 0.0003
(2.37)
2
CW
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
1
3
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical Rotation
3600°, + 15° - 0°
Ball
Bearing Type
Torque (maximum)
0.4 oz. - in (28.80 g - cm)
0.3 oz. - in (21.60 g - cm)
STARTING
RUNNING
Mechanical Runouts (maximums):
Shaft (TIR)
Pilot Dia. (TIR)
Lateral (TIR)
Shaft End Play
Shaft Radial Play
0.002" (0.05 cm)
0.003" (0.08 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
Weight
0.3 oz. (8.50 g) maximum
Stop Strength
20 oz. - in (static) (1.44 kg - cm)
RATED POWER IN W
POWER RATING CHART
3.0
RESISTANCE ELEMENT DATA
2.5
STANDARD
RESISTANCE
VALUES
()
2.0
1.5
MAXIMUM
RESO- OHMS CURRENT
AT 40 °C
LUTION PER
TURN AMBIENT
(%)
(mA)
MAXIMUM
VOLTAGE
ACROSS
COIL
(V)
WIRE
TEMP.
COEF.
(ppm/°C)
100
0.092
0.092
141
14
20
1.0
200
0.069
0.138
100
20
20
0.5
500
0.049
0.245
63
32
20
1K
0.047
0.470
45
45
20
2K
0.038
0.763
32
64
20
5K
0.031
1.56
20
100
20
10K
0.025
2.55
14
140
20
20K
0.020
3.94
10
200
20
30K
0.018
5.34
8.2
246
20
50K
0.015
7.64
6.3
315
20
100K
0.013
13.2
4.5
450
20
0
0
25
50
75
100
125
150
AMBIENT TEMPERATURE IN °C
MARKING
Example of a marking for a standard part: 164-21502
Revision: 08-Apr-13
Document Number: 57095
106
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 502
www.vishay.com
7/
Vishay Spectrol
8"
(22.2 mm) Ten Turn Wirewound
Upper Grade Precision Potentiometer
FEATURES
• Bushing mount and servo mount designs are available
• Large ohmic value range: 15  to 100 k
• Dual gang configuration
• Improved linearity available
• Long life > 2 million shaft revolutions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Output by turrets
Market appliance
Professional
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance
Tolerance: 100 and above
Below 100 
STANDARD
15  to 100 k
±3%
±5%
SPECIAL
15  to 150 k
±1%
±3%
STANDARD
± 0.25 %
± 0.25 %
± 0.25 %
± 0.25 %
BEST PRACTICAL
± 0.15 %
± 0.10 %
± 0.075 %
± 0.05 %
Linearity (independent)
15  to 50 
50  to 1 k
1 k to 5 k
5 k and above
100  ENR
Noise
Electrical rotation
3600° + 4° - 0°
Power rating:
Additional sections
2.0 W at 70 °C ambient derated to zero at 125 °C
75 % of the rating of section 1 (1.5 W at 70 °C)
Insulation resistance
1000 M minimum 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Linearity x total resistance or 0.5  whichever is greater
Absolute minimum resistance
Linearity x total applied voltage for total resistance above 20 , 2.0 % of applied voltage for
20  and below
End Voltage
Phasing (CCW end points)
Additional sections phased to section 1 within ± 2°
Taps (extra)
54 available as special, standard tolerance ± 2°
ORDERING INFORMATION/DESCRIPTION
The Model 502 can be ordered from this datasheet with a variety of alternate characteristics, as shown above. For most rapid service on
your order, please state:
502
S
2
MODEL
STYLE
NUMBER OF
SECTIONS
B: Bushing
S: Servo
1 or 2
10K
20K
BO1
TOTAL RESISTANCE OF EACH SECTION
PACKAGING
Beginning with the section nearest
the mounting end
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
502
S
2
103
203
B01
MODEL
STYLE
NUMBER OF
SECTIONS
OHMIC VALUE
SECTION N° 1
OHMIC VALUE
SECTION N° 2
PACKAGING
Revision: 09-Apr-13
Document Number: 57064
107
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 502
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 502B/502-1
1
± 0.010
± 0.031
1.448
(36.78)
0.687
(17.45)
0.168 MIN.
(4.27)
2
0.312
(7.92)
1
± 0.015
45°
+ 0.0000
TYP. - 0.0003
± 10°
Ø 0.1248
(3.17)
3
± 0.015
0.172 TYP.
(4.37)
± 0.015
Ø 0.875
(22.22)
0.594 R
(15.09)
MAX.
+ 0.000
Ø 0.281 - 0.001
(7.14)
± 0.015
0.062
(1.57)
MTG. FACE
1/
4
- 32 UNEF 2A
SERVO MOUNT: 502S/502-2
1
± 0.010
1.536
(39.01)
± 0.031
0.375
(9.52)
0.057 MIN.
(1.45)
0.257 MIN.
(6.53)
0.062
(1.57)
0.062
(1.57)
2
1
3
+ 0.0000
- 0.0005
1
Ø 0.7500
(19.05)
ADD 1.282 ± 0.002 (32.56) FOR EACH
ADDITIONAL SECTION
2
Ø 0.875
(22.22)
CW
3
1
SCHEMATIC
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
0.750 MAX.
(19.05)
MTG. FACE
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing type
Torque (maximums)
Servo section 1
Bushing section 1
Each additional section
Mechanical runout (maximums):
Shaft runout (TIR)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Weight:
Single section
Each additional section
Stop strength
Ganging
Moment of inertia
Revision: 09-Apr-13
3600° + 10° - 0°
SERVO
Ball bearing
BUSHING MOUNT
Sleeve bearing
STARTING
0.4 oz. - in (28.8 g - cm)
0.5 oz. - in (36.0 g - cm)
0.3 oz. - in (21.6 g - cm)
RUNNING
0.3 oz. - in (21.6 g - cm)
0.4 oz. - in (28.8 g - cm)
0.2 oz. - in (14.4 g - cm)
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
1.20 oz. (34.0 g)
0.80 oz. (22.7 g)
100 oz. - in, static (7.2 kg - cm)
2 sections, terminal alignment, added sections, within ± 10° of section 1 terminals
0.45 g - cm2 per section maximum
Document Number: 57064
108
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 502
www.vishay.com
Vishay Spectrol
ENVIRONMENTAL SPECIFICATIONS
MATERIAL SPECIFICATIONS
Housing
Phenolic (black) glass filled
Lids
Aluminum, anodized
Vibration
Shaft
Stainless steel, non-magnetic,
non-passivated
Salt Spray
Terminals
Brass, plated for solderability
Load Life
Clamp ring
Stainless steel
Bushing mounting hardware
Lockwasher internal tooth:
Panel nut:
50 g
96 h
Rotational Life
2 million shaft revolutions
900 h
Operating Temperature Range
Steel, nickel plated
Brass, nickel plated
MARKING
Unit
identification
15 g thru 2000 CPS
Shock
Units shall be marked with Vishay spectrol
name and model no, resistance and resistance
tolerance, linearity, terminal identification, and
date code.
Example of a marking for a standard part:
502-11050
- 55 °C to + 125 °C
RESISTANCE ELEMENT DATA
STANDARD
OHMS
RESISTANCE RESOPER
VALUES
LUTION
TURN
()
(%)
MAXIMUM MAXIMUM
WIRE
CURRENT VOLTAGE
TEMP.
ACROSS
AT 70 °C
COEF.
COIL
AMBIENT
(ppm/°C)
(V)
(mA)
15
0.088
0.013
365
5.48
800
20
0.066
0.013
316
6.32
800
50
0.050
0.025
200
10.0
800
100
0.050
0.050
141
14.1
180
POWER RATING CHART
200
0.049
0.098
100
20.0
20
(Ratings for cup No. 1. Additional cups 75 % of values
shown)
500
0.037
0.185
63.2
31.6
20
1K
0.034
0.339
44.7
44.7
20
2K
0.029
0.571
31.6
63.2
20
5K
0.023
1.173
20.0
100
20
10K
0.017
1.731
14.1
141
20
20K
0.016
3.142
10.0
200
20
50K
0.011
5.639
6.32
316
20
100K
0.010
10.325
4.47
447
20
150K
0.010
14.170
3.65
548
20
6
RATED POWER IN W
5
4
3
2
SPECIAL 150 °C
1
0
STANDARD 125 °C
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
Revision: 09-Apr-13
Document Number: 57064
109
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 533, 534, 535
www.vishay.com
7/
8"
Vishay Spectrol
(22.2 mm) Multi Turn Wirewound Potentiometer 533: 3 Turns/534: 10 Turns/535: 5 Turns
FEATURES
•
•
•
•
•
•
•
•
Note
• The color of this product may either be black (US market) or blue
(other regions)
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
Bushing and servo mount designs available
Special resistance tolerances to 1 %
Rear shaft extensions and support bearing
Metric shaft available
Dual gang configuration and concentric shafts
High torque, center tap, slipping clutch on request
Special markings and front shaft extensions
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, multi turn wirewound
Output by turrets
Industrial
7/ " (22.2 mm)
8
ELECTRICAL SPECIFICATIONS
PARAMETER
Resistance range - standard values
Capability range
Standard tolerance
Linearity (independent)
Noise
MODEL 533
50  to 20 k
5  to 60 k
±5%
± 0.25 %
100  ENR
1080° + 10°
Rotation (electrical and mechanical)
MODEL 534
100  to 100 k
10  to 200 k
±5%
± 0.25 %
100  ENR
3600° + 10°
- 0°
Power rating (at 70 °C)
Insulation resistance
Dielectric strength
Absolute minimum resistance
Temperature coefficient
End voltage
Phasing
Taps
MODEL 535
50  to 50 k
5  to 100 k
±5%
± 0.25 %
100  ENR
1800° + 10°
- 0°
- 0°
1.0 W
2.0 w
1.5 W
1000 M minimum 500 VDC
1000 VRMS minimum 60 Hz
Not to exceed linearity x total resistance or 1 , whichever is greater
20 ppm/°C (standard values, wire only)
0.25 % of total applied voltage, maximum
CCW end points - section 2 phased to section 1 within ± 2°
Center tap only
MARKING
RESISTANCE VALUES
Unit identification
Manufacturer’s name and model number,
resistance value and tolerance, linearity
specification date code and terminal
identification.
Example of a marking for a standard part:
534-11103
533 (
50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K
534 (
100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K
535 (
50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K
ORDERING INFORMATION/DESCRIPTION
The Models 533 (3 turns), 534 (10 turns) and 535 (5 turns) can be ordered by stating
534
MODEL
B
2
10K
20K
5%
MOUNTING
NUMBER OF
SECTION
OHMIC VALUE
SECTION No 1
OHMIC VALUE
SECTION No 2
TOLERANCE ON
OHMIC VALUE
C
B: Bushing
S: Servo
BO10
e4
LINEARITY
PACKAGING
LEAD
FINISH
± 0.25 % (STD)
Box of
10 pieces
SAP PART NUMBERING GUIDELINES
534
MODEL
B
2
103
203
J
C
B
STYLE
NUMBER OF
SECTION
OHMIC VALUE
SECTION No 1
OHMIC VALUE
SECTION No 2
TOLERANCE ON
OHMIC VALUE
LINEARITY
PACKAGING
103 = 10K
203 = 20K
J: ± 5 %
F: ± 1 %
C: ± 0.25 %
CUSTOM:
L: ± 0.20 %
D: ± 0.1 %
Box of
10 pieces
B: Bushing
S: Servo
Revision: 17-Apr-13
Document Number: 57065
110
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 533, 534, 535
www.vishay.com
Vishay Spectrol
SINGLE SECTION DIMENSIONS in inches (millimeters)
± 0.015
± 0.031
0.812 (20.62)
0.750 (19.05)
± 0.015
0.312 (7.92)
0.030 MAX. (0.76)
0.062 (1.57)
0.200 MIN. (5.08)
METRIC SHAFT: 534B...8872
2
BUSHING
MOUNT MODEL:
534B/534-1
1
3
+ 0.0000
Ø 0.2497 (6.34) - 0.0003
± 0.015
+ 0.0000
- 0.0020
Ø 0.4062
(10.32)
Ø 0.875
(22.22)
+ 0.000
Ø 6.00 mm - 0.0003
± 0.010
0.032 x 0.032
(0.81) x (0.81) DP
3/
8
- 32UNEF - 2A
9 mm x 0.75 P
SCREWDRIVER SLOT
0.850
(21.59) ± 0.015
± 0.031
0.375 (9.52)
0.062 (1.57)
0.057 (1.45) MIN.
2
SERVO
MOUNT MODEL:
534S/534-2
Ø 0.875
(22.22)
30°
TYP.
0.062 (1.57)
0.300 (7.62) MIN.
1
3
R 0.625 MAX.
(15.88)
+ 0.0000
Ø 0.7500 (19.05) - 0.0005
Ø 0.1248 (3.17)
± 0.015
+ 0.0000
- 0.0003
2
CW
1
Ø 0.875 (22.22)
Ø 0.750 (19.05) MAX.
3
SCHEMATIC
Mounting hardware, washer and panel nut, nickel plated
MECHANICAL SPECIFICATIONS
PARAMETER
Bearing type
Bushing: Sleeve bearing
Servo: Ball bearing
Torque (maximums): starting
Section 1
Section 2
534
0.5 oz. - in (36 g - cm)
0.9 oz. - in (65 g - cm)
533/535
0.7 oz. - in (50 g - cm)
1.1 oz. - in (79 g - cm)
Torque (maximums): running
Section 1
Section 2
534
0.4 oz. - in (28.80 g - cm)
0.7 oz. - in (50.40 g - cm)
533/535
0.6 oz. - in (43.20 g - cm)
0.9 oz. - in (64.8 g - cm)
Weight (maximums)
Section1
Section 2
0.75 oz. (21.26 g)
1.25 oz. (35.44 g)
Stop strength
75 oz. - in (static) (5.4 kg - cm)
Ganging
2 sections maximum
POWER RATING CHART
ENVIRONMENTAL SPECIFICATIONS
4
Vibration
Shock
RATED POWER IN W
534
535
Rotational life (shaft revolution)
533
534
534 (servo)
535
533
Load life
3
2
Temperature range
15 g thru 2000 Hz
50 g
300 000
1 000 000
> 1 000 000
500 000
900 h
- 55 °C to + 125 °C
1
0
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
Revision: 17-Apr-13
Document Number: 57065
111
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 533, 534, 535
www.vishay.com
Vishay Spectrol
RESISTANCE ELEMENT DATA
RESISTANCE VALUE
()
RESOLUTION
(%)
OHMS PER TURN
MAXIMUM CURRENT
AT 70 °C AMBIENT
(mA)
MAXIMUM VOLTAGE
ACROSS COIL
(V)
533
534
535
533
534
535
533
534
535
533
534
535
533
534
535
50
-
50
0.149
-
0.120
0.0746
-
0.0603
141.0
-
173.0
7.07
-
8.66
100
100
100
0.111
0.060
0.075
0.1114
0.0603
0.0746
100.0
141.0
122.0
10.0
14.1
12.2
200
200
200
0.097
0.037
0.061
0.1954
0.0746
0.1220
70.7
100.0
86.6
14.1
20.0
17.3
500
500
500
0.069
0.031
0.049
0.3424
0.1520
0.2459
44.7
63.2
54.7
22.4
31.6
27.4
1K
1K
1K
0.063
0.025
0.041
0.6331
0.2459
0.4113
31.6
44.7
38.7
31.6
44.7
38.7
2K
2K
2K
0.041
0.021
0.031
0.8206
0.4113
0.6331
22.4
31.6
27.4
44.7
63.2
54.8
5K
5K
5K
0.044
0.016
0.034
2.2330
0.8206
1.7230
14.1
20.0
17.3
70.7
100.0
86.6
10K
10K
10K
0.034
0.017
0.030
3.4510
1.7230
3.0160
10.0
14.1
12.2
100.0
141.0
122.0
20K
20K
20K
0.031
0.015
0.020
6.1790
3.0160
3.9910
7.07
10.0
8.66
141.0
200.0
173.0
-
50K
50K
-
0.009
0.015
-
4.6690
7.4560
-
6.32
5.47
-
316.0
274.0
-
100K
-
-
0.007
-
-
7.4560
-
-
4.47
-
-
447.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Revision: 17-Apr-13
Document Number: 57065
112
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 536
www.vishay.com
7/
Vishay Spectrol
8"
(22.2 mm) Ten Turn Wirewound
Precision Potentiometer with a Plastic Shaft
FEATURES
• 10 standard resistance values
• Plastic shaft
• Rugged integrated construction
• 0.25 % linearity
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Output by turrets
Market appliance
Industrial
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Range 100  to 100 k, tolerance ± 5 %
Total resistance
Linearity (independent)
± 0.25 %
100  ENR maximum
Noise
Electrical angle
3600°
+ 10°
- 0°
Power rating
2.0 W at 70 °C derated to zero at 125 °C
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Not to exceed 0.10 % of total resistance or 1 , whichever is greater
Absolute minimum resistance
Temperature coefficient
20 ppm/°C (wire only)
End voltage
0.25 % of total applied voltage maximum
ORDERING INFORMATION/DESCRIPTION
536
B
10K
BO10
e4
MODEL
MOUNTING
OHMIC VALUE
PACKAGING
LEAD FINISH
B: Bushing
Box of 10 pieces
SAP PART NUMBERING GUIDELINES
536
B
103
B10
MODEL
STYLE
OHMIC VALUE
PACKAGING
Revision: 09-Apr-13
Document Number: 57066
113
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 536
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 536B/536-1
± 0.015
0.750
(19.05)
± 0.031
0.812
(20.62)
± 0.015
0.312
(7.92)
0.062
(1.57)
0.200 MIN.
(5.08)
0.030 MAX. (0.76)
3/
8
- 32 UNEF - 2A
30°
2
1
0.625 R
MAX.
(15.88)
3
± 0.015
+ 0.0000
Ø 0.875
(22.22)
Ø 0.4062 - 0.0020
(10.32)
+ 0.000
- 0.002
Ø 0.250 (6.35)
SCREWDRIVER SLOT
0.032 WIDE x 0.032 ± 0.010
DEEP (0.81 x 0.81)
METRIC SHAFT/BUSHING THREAD
9 mm: 0.75 P
Ø 6.00
2
+ 0.00
- 0.05
CW
3
1
SCHEMATIC
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
3600°
+ 10°
- 0°
Torque (maximums)
Mechanical runouts
Shaft (TIR)
Pilot dia. (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Weight (maximum)
Stop strength
Revision: 09-Apr-13
STARTING
0.5 oz. - in (36.00 g - cm)
RUNNING
0.4 oz. - in (28.80 g - cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.010" (0.25 cm)
0.005" (0.13 cm)
0.75 oz. (21.26 g)
75 oz. - in (static) (5.4 kg - cm)
Document Number: 57066
114
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 536
www.vishay.com
Vishay Spectrol
RESISTANCE ELEMENT DATA
MATERIAL SPECIFICATIONS
Front lid
Stainless steel and nickel
plated brass bushing
Housing
Thermoplastic nylon glass filled
STANDARD
OHMS
RESISTANCE RESOLUTION
PER
VALUES
(%)
TURN
()
MAXIMUM
CURRENT
AT 70 °C
AMBIENT
(mA)
MAXIMUM
VOLTAGE
ACROSS
COIL
(V)
Rear lid
Thermo-glass filled
Shaft
Thermo-glass filled
100
0.060
0.0603
141.0
14.1
Brass plated for solderability
200
0.037
0.0746
100.0
20.0
500
0.031
0.1520
63.2
31.6
1K
0.025
0.2459
44.7
44.7
2K
0.021
0.4113
31.6
63.2
Terminals
Mounting hardware
Lockwasher internal tooth:
Panel nut:
Steel nickel plated
Brass, nickel plated
5K
0.016
0.8206
20.0
100.0
ENVIRONMENTAL SPECIFICATIONS
10K
0.017
1.7230
14.1
141.0
Vibration
15 g thru 2000 Hz
20K
0.015
3.0160
10.0
200.0
50 g
50K
0.009
4.6690
6.32
316.0
1 million shaft revolutions
100K
0.007
7.4560
4.47
447.0
Shock
Rotational life
Load life
900 h
Operating temperature range
- 55 °C to + 125 °C
MARKING
POWER RATING CHART
Unit
identification
RATED POWER IN W
4
Units shall be marked with Vishay Spectrol
name and model no, resistance, resistance
tolerance, linearity, terminal identification and
date code.
Example of a marking for a standard part:
536-1-1-502
3
2
1
0
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
Revision: 09-Apr-13
Document Number: 57066
115
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 552
www.vishay.com
7/
Vishay Spectrol
8"
(22.2 mm) Three Turn Wirewound
Upper Grade Precision Potentiometer
FEATURES
• Large range of ohmic values: 5  to 20 k
• Bushing mount or servo mount designs are available
• Gangable up to 3 sections
• Extra taps available upon request
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Market appliance
Output by turrets
Professional
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance
Tolerance 50  and above
Below 50 
STANDARD RANGE
5  to 20 k
±3%
±5%
SPECIAL
45 k
±1%
±3%
STANDARD
BEST PRACTICAL
± 0.25 %
± 0.25 %
± 0.25 %
± 0.25 %
± 0.20 %
± 0.125 %
Linearity (independent)
Total resistance
5  to 500 
500  to 2 k
2 k and above
100  ENR
Noise
Electrical rotation
1080° + 4° - 0°
Power rating
Section 1
Additional section
1.0 W at 70 °C ambient to zero at 125 °C
75 % of the rating of section 1 (0.75 W at 70 °C)
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS minimum, 60 Hz
Linearity x total resistance or 0.5 , whichever is greater
Absolute minimum resistance
Linearity x total applied voltage for total resistance
above 20 , 2.0 % of total applied voltage for 20  and below
End boltage
Phasing (CCW end points)
Additional sections phased to section 1 within ± 2°
Taps (extra)
16 available as special, standard tolerance ± 2°
ORDERING INFORMATION/DESCRIPTION
The model 552 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
552
MODEL
B
1
10K
BO1
MOUNTING
NUMBER OF SECTIONS
OHMIC VALUE OF
SECTION No 1
PACKAGING
B: Bushing
S: Servo
From 1 up to 3
Box of 1 piece
Other characteristics will be standard as described on this datasheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time
for delivery.
SAP PART NUMBERING GUIDELINES
552
MODEL
Revision: 10-Apr-13
B
STYLE
1
103
B01
NUMBER OF SECTIONS
OHMIC VALUE OF
SECTION No 1
PACKAGING
Document Number: 57067
116
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 552
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
BUSHING MOUNT: 552B/552-1
1
± 0.010
± 0.031
0.948
(24.08)
0.687
(17.45)
2
1
± 0.015
± 0.015
0.168 MIN.
(4.27)
0.312
(7.92)
± 10°
45°
+ 0.0000
0.172 TYP.
(4.37)
Ø 0.1248 TYP.- 0.0003
(3.17)
3
± 0.015
0.875
(22.22)
0.594 R
MAX.
(15.09)
+ 0.000
± 0.015
Ø 0.281- 0.001
(7.14)
0.062
MTG. FACE
1/
4
- 32 UNEF 2A
SERVO MOUNT: 552S/552-2
1
± 0.010
1.036
(26.31)
± 0.031
0.375
(9.52)
0.057 MIN.
(1.45)
0.257 MIN.
(6.53)
2
1
0.062
(1.57)
0.062
(1.57)
3
+ 0.0000
- 0.0005
Ø 0.7500
(19.05)
Ø 0.875
(22.22)
2
CW
3
1
Ø 0.750 MAX.
(19.05)
SCHEMATIC
MTG. FACE
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
1
ADD 0.782 ± 0.002 (19.86) FOR EACH
ADDITIONAL SECTION
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical rotation
1080° + 10° - 0°
Bearing type: servo mount
Bushing mount
Ball bearing
Sleeve bearing
Torque (maximum)
Servo: 1 section
Bushing: 1 section
Each additional section
Mechanical runouts (maximum)
Shaft runout (TIR/in)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Weight (maximum): single section
Additional section
Stop strength
Ganging
Moment of inertia
Revision: 10-Apr-13
STARTING
0.4 oz. - in (28.8 g - cm)
0.5 oz. - in (36.0 g - cm)
0.3 oz. - in (21.6 g - cm)
RUNNING
0.3 oz. - in (21.6 g - cm)
0.4 oz. - in (28.8 g - cm)
0.2 oz. - in (14.4 g - cm)
SERVO
0.002" (0.05 cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
0.75 oz. (21.7 g)
0.60 oz. (17.0 g)
100 oz. - in static (7.2 kg - cm)
3 sections maximum, terminal alignment added
sections within ± 10° of section 1 terminals
0.30 g - cm2 per section maximum
Document Number: 57067
117
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 552
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing
Vibration
Glass filled phenolic (black)
Lids
Aluminum, anodized
Shaft
Stainless steel, non magnetic,
non-passivated
Terminals
Brass, gold plated
Clamp ring
Stainless steel
15 g thru 2000 Hz
Shock
50 g
Salt spray
96 h
Rotational life
600 000 shaft revolutions
Load life
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
Steel, nickel plated
Brass, nickel plated
900 h
Operating temperature range
- 65 °C to + 125 °C
MARIKNG
Units will be marked with Vishay Spectrol name and model no, resistance and resistance tolerance,
linearity, terminal identification, and date code.
Example of a marking for a standard part: 552-22102502
Unit identification
POWER RATING CHART
(Ratings for cup No 1. Additional cups 75 % of values
shown)
RATED POWER IN W
3
2
1
SPECIAL 150 °C
STANDARD 125 °C
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
Revision: 10-Apr-13
160
RESISTANCE ELEMENT DATA
MAXIMUM MAXIMUM
WIRE
STANDARD
RESO- OHMS CURRENT VOLTAGE
TEMP.
RESISTANCE
LUTION PER AT 70 °C ACROSS
COEF.
VALUES
COIL
(%)
TURN AMBIENT
(ppm/°C)
()
(V)
(mA)
5
0.265
0.013
447
2.24
800
10
0.182
0.018
316
3.16
800
20
0.155
0.031
224
4.48
800
50
0.150
0.075
141
7.05
180
100
0.125
0.125
100
10.0
20
200
0.116
0.232
70.7
14.1
20
500
0.103
0.517
44.7
22.4
20
1K
0.089
0.886
31.6
31.6
20
2K
0.071
1.411
22.4
44.8
20
5K
0.057
2.828
14.1
70.5
20
10K
0.044
4.381
10.0
100
20
20K
0.036
7.199
7.07
141
20
45K
0.031
14.170
4.71
212
20
Document Number: 57067
118
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 802
www.vishay.com
Vishay Spectrol
1 13/16" (46 mm) Ten Turn Wirewound
Upper Grade Precision Potentiometer
FEATURES
• Large range of ohmic values: 20  to 200 k
• Bushing mount, servo mount and screw mount versions
• Gangable up to 3 sections
• Extra taps available upon request
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Output by turrets
Market appliance
Professional
1 13/16" (46 mm)
Dimensions
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance
Tolerance: 200  and above
Below 200 
Linearity (independent)
20  to 50 
50  to 200 
200  and above
STANDARD
20  to 200 k
±3%
±5%
SPECIAL
500 k
±1%
±3%
STANDARD
± 0.25 %
± 0.25 %
± 0.25 %
SPECIAL
± 0.15 %
± 0.10 %
± 0.05 %
100  ENR
Noise
Electrical rotation
3600° + 4° - 0°
Power rating
Section 1
Each additional sections:
5.00  70 °C ambient, derated to zero at 125 °C
75 % of the rating of section 1 (3.8 W at 70 °C)
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Linearity x total resistance or 0.5 , whichever is greater
Absolute minimum resistance
Linearity x total applied voltage for total resistance above 20 , 2.0 % of total applied voltage
for 20 and below
End voltage
Phasing (CCW end points)
Additional sections phased to section 1 within ± 1°
Taps (extra)
Available as special, standard tolerance ± 1°
ORDERING INFORMATION/DESCRIPTION
Model 802 can be ordered from this datasheet with a variety of alternate characteristics, as shown above. For most rapid service on your
order, please state:
802
S
1
10K
BO1
MODEL
MOUNTING
NUMBER OF SECTIONS
RESISTANCE OF EACH SECTION
PACKAGING
B: Bushing
S: Servo
C: Screw
From 1 up to 3 max.
Beginning with the section nearest the
mounting end
Box of 1 piece
103
B01
SAP PART NUMBERING GUIDELINES
802
MODEL
Revision: 10-Apr-13
S
STYLE
1
NUMBER OF SECTIONS
OHMIC VALUE OF SECTION
No
1
PACKAGING
Document Number: 57072
119
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 802
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
SERVO MOUNT: 802S/802-2
1
± 0.010
± 0.031
2.062
(52.37)
± 0.031
0.625
(15.88)
0.812
(20.62)
+ 0.0000
0.301 MIN.
(7.64)
2 1
BUSHING MOUNT: 802B/802-1
0.312
(7.92)
± 0.015
Ø 0.2497 TYP. - 0.0003
(6.34)
0.219 TYP.
(5.56)
0.062
(1.57)
3
+ 0.0000
+ 0.000
- 0.001
Ø 0.4062 - 0.0010
(10.32)
Ø 1.875
(47.62)
± 0.015
Ø 1.812
(46.02)
± 0.015
Ø 2.000
(50.80)
0.562
(14.27)
0.093
(2.36)
MTG. FACE
0.062
(1.57)
0.062
(1.57)
3/
8
- 32 UNEF - 2A
MTG. FACE
0.073 MIN.
(1.85)
Ø 0.125
(3.18)
SCREW MOUNT: 802C/802-3
± 10°
45°
+ 0.0000
Ø 0.7500 - 0.0005
(19.05)
2
CW
3
1
± 0.015
8 - 32 UNC - 2B 0.156
DEEP (3.96) 3 HOLES
EQUALLY SPACED ON A
1.250 DIA. (31.75) B.C
0.062
(1.57)
SCHEMATIC
MTG. FACE
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
1.062 R MAX.
(26.97)
1
ADD 1.770 ± 0.010 (44.96) FOR EACH
ADDITIONAL SECTION
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
3600° + 10° - 0°
Bearing type
SERVO
Ball bearing
Torque (maximums)
Servo or screw section 1
Bushing section 1
Each additional section
MAX. STARTING
1.20 oz. - in (86.4 g - cm)
1.75 oz. - in (126.0 g - cm)
0.80 oz. - in (57.6 g - cm)
MAX. RUNNING
0.80 oz. - in (57.6 g - cm)
1.25 oz. - in (90.0 g - cm)
0.60 oz. - in (43.2 g - cm)
SERVO OR SCROLL
0.002" (0.05 cm)
0.002" (0.05 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
Mechanical runouts (maximums):
Shaft (TIR/in)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Weight:
Single section
Each additional section
Stop strength
Ganging
Moment of inertia
Revision: 10-Apr-13
BUSHING
Sleeve
SCREW
Ball bearing
5.5 oz. (156 g)
3.7 oz. (105 g)
1000 oz. - in, static (72 kg - cm)
3 sections maximum terminal alignment, added sections within ± 10° of section 1
terminals
15 g - cm2 per section maximum
Document Number: 57072
120
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 802
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing
Vibration
Glass filled thermoset plastic
Lids
Aluminum, anodized
Shaft
Stainless steel, non-magnetic,
non-passivated
Salt spray
Terminals
Brass, plated for solderability
Load life
Clamp ring
Stainless steel
Bushing mount hardware
Lockwasher:
Panel nut:
50 g
96 h
Rotational life
2 million shaft revolutions
900 h
Operating temperature range
Internal tooth steel, nickel plated
Brass, nickel plated
MARKING
Unit
identification
15 g thru 2000 CPS
Shock
Units shall be marked with Spectrol name and
model no, resistance and resistance tolerance,
linearity, terminal identification, and date code.
Example of a marking for a standard part:
802-31502
- 55 °C to + 125 °C
RESISTANCE ELEMENT DATA
MAXIMUM MAXIMUM
WIRE
STANDARD
RESO- OHMS CURRENT VOLTAGE
TEMP.
RESISTANCE
LUTION PER AT 70 °C ACROSS
COEF.
VALUES
COIL
(%)
TURN AMBIENT
(ppm/°C)
()
(V)
(mA)
20
0.044
0.009
500
10.0
800
50
0.027
0.014
316
15.8
800
100
0.024
0.024
224
22.4
800
POWER RATING CHART
200
0.028
0.056
158
31.6
180
(Ratings for cup No 1. Additional cups 75 % of values shown)
500
0.023
0.115
100
50.0
20
12
RATED POWER IN W
10
8
6
SPECIAL 150 °C
4
1K
0.018
0.182
70.7
70.7
20
2K
0.020
0.402
50.0
100
20
5K
0.015
0.754
31.6
158
20
10K
0.013
1.229
22.4
224
20
20K
0.010
1.970
15.8
316
20
50K
0.007
3.686
10.0
500
20
100K
0.007
6.507
7.07
707
20
200K
0.005
6.929
5.00
1000
20
500K
0.004
19.987
2.00
1000
20
STANDARD 125 °C
2
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
Revision: 10-Apr-13
Document Number: 57072
121
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 830
www.vishay.com
Vishay Spectrol
1 13/16" (46 mm) Three Turn Wirewound Potentiometer
Bushing Mount
FEATURES
• Gangable up to 2 sections
• Large range of ohmic values: 15  to 50 k
• Extra taps available upon request
• Ideally suits for all industry applications
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Output by turrets
Market appliance
Industrial
1 13/16" (46 mm)
Dimensions
ELECTRICAL SPECIFICATIONS
PARAMETER
MODEL 830
Total resistance
Standard range
Tolerance:
200  and above
Below 200 
SPECIAL
to 150 k
SPECIAL
±1%
±3%
15  to 50 k
STANDARD
±3%
±5%
Linearity (independent)
± 0.25 % standard
15  to 1 k
1 k to 5 k
5 k to 25 k
25 k and above
± 0.15 %
± 0.10 %
± 0.075 %
± 0.05 %
100  ENR
Noise
Electrical rotation
1080° + 4° - 0°
Power rating
3.0 W at 40 °C derated to zero at 125 °C
Insulation resistance
1000 M minimum 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Not to exceed linearity x total resistance or 1 , whichever is greater
Absolute minimum resistance
End voltage
0.5 % of total applied voltage maximum
Phasing
CCW end points sect. 2 phased to sect 1 within 1°
Taps (extra)
Available as special standard tolerance ± 1°
ORDERING INFORMATION/DESCRIPTION
Model 830 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
830
B
1
20K
BO10
MODEL
BUSHING MOUNT
NUMBER OF SECTIONS
RESISTANCE OF EACH SECTION
PACKAGING
From 1 up to 2 sections
(maximum)
Beginning with the section nearest
the mounting end
Box of 10 pieces
SAP PART NUMBERING GUIDELINES
830
B
1
203
B10
MODEL
STYLE
NUMBER OF SECTION
OHMIC VALUE OF SECTION No 1
PACKAGING
Revision: 10-Apr-13
Document Number: 57073
122
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 830
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
MODEL: 830/830-1...
MTG. FACE
1
± 0.015
1.218
(30.94)
0.250
MIN.
(6.35)
0.062
(1.57)
± 0.031
0.812
(20.62)
± 0.015
0.312
(7.92)
0.030
MAX.
(0.76)
0.010
(0.25)
1 3
2
± 0.015
0.218
(5.54)
3/
8
- 32 UNEF - 2A
± 0.015
1.812
(46.02)
0.062
(1.57)
0.562
(14.27)
+ 0.0000
Ø 0.2497 - 0.0003
(6.34)
Ø 0.125
(3.18)
+ 0.0000
MTG. - 0.0020
Ø 0.4062
(10.32)
1
2
ADD 1.010 ± 0.010 (25.65) FOR 2 GANG UNIT
CW
3
1
SCHEMATIC
TOLERANCES: OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
1080° + 4° - 0°
Bearing type
Torque (maximums): starting
Section 1
Section 2
Runouts (maximums)
Shaft (TIR)
Pilot dia. (TIR)
Lateral (TIR)
Shaft end play
Shaft radial play
Weight (maximums)
Single section
Additional section
Stop strength
Ganging
Moment inertia
Revision: 10-Apr-13
Sleeve bearing
STARTING
1.75 oz. - in (126.02 g - cm)
2.55 oz. - in (183.62 g - cm)
RUNNING
1.26 oz. - in (90.01 g - cm)
1.85 oz. - in (133.21 g - cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" min. 0.010" max. (0.05 cm to 0.25 cm)
0.003" max. (0.08 cm)
3.0 oz. (85.05 g)
2.5 oz. (70.80 g)
750 oz. - in (static) (54.01 kg - cm)
2 sections maximum ears of clamp band between sections positioned 45°, ± 10° CCW from terminal
center line
5.5 g - cm2 maximum
Document Number: 57073
123
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 830
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Bushing
Vibration
Aluminum, nickel plated
Molded glass filled thermoset
plastic
Housing and front lid
Rear lid
Molded glass filled nylon
Shaft
Stainless steel, non magnetic,
non-passivated
Terminals
Brass, plated for solderability
Mounting hardware
Lockwasher:
Panel nut:
10 g thru 500 CPS
Shock
50 g
Rotational life
500 000 shaft revolution
Load life
900 h
Temperature range
- 55 °C to + 125 °C
Salt spray
48 h
Internal tooth steel, nickel plated
Brass, nickel plated
MARKING
Units will be marked with Spectrol name and model no, resistance and resistance tolerance, linearity, terminal
identification, and date code.
Example of a marking for a standard part: 830-11103
Unit identification
POWER RATING CHART
RESISTANCE ELEMENT DATA
12
MAXIMUM MAXIMUM
STANDARD
WIRE
RESO- OHMS CURRENT VOLTAGE
RESISTANCE
TEMP.
LUTION PER AT 70 °C ACROSS
VALUES
COEF.
(%)
TURN AMBIENT
COIL
()
(ppm/°C)
(mA)
(V)
RATED POWER IN W
10
8
6
4
2
0
0
20
40
60
80
100
120
AMBIENT TEMPERATURE IN °C
Revision: 10-Apr-13
140
20
0.094
0.019
387
8
800
50
0.074
0.037
245
12
800
100
0.071
0.071
173
17
180
200
0.072
0.145
122
25
20
500
0.064
0.320
77
39
20
1K
0.050
0.500
55
55
20
2K
0.047
0.948
39
77
20
5K
0.035
1.73
24
125
20
10K
0.029
2.92
17
176
20
20K
0.024
4.80
12
250
20
50K
0.017
8.31
8
375
20
100K
0.015
14.5
5
600
20
150K
0.013
20.0
4
750
20
Document Number: 57073
124
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 852
www.vishay.com
Vishay Spectrol
1 13/16" (46 mm) Three Turn Wirewound
Upper Grade Precision Potentiometer
FEATURES
• Large range of ohmic values: 15  to 50 k
• Bushing mount, servo mount and srew mount version
• Gangable up to 3 sections
• Extra taps available upon request
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Market appliance
Output by turrets
Professional
Dimensions
1 13/16" (46 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance
Tolerance: 100  and above
Below 100 
Linearity (independent)
15  to 1 k
1 k to 5 k
5 k to 25 k
25 k and above
STANDARD
15  to 50 k
±3%
±5%
SPECIAL
150 k
±1%
±3%
STANDARD
± 0.25 %
± 0.25 %
± 0.25 %
± 0.25 %
SPECIAL
± 0.15 %
± 0.10 %
± 0.075 %
± 0.05 %
100  ENR
Noise
Electrical rotation
1080° + 4° - 0°
Power rating
Section 1
Additional sections
2.0 W at 70 °C ambient, derated to zero at 125 °C
75 % of the rating of section 1 (1.5 W at 70 °C)
Insulation resistance
1000 M minimum, 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Linearity x total resistance or 0.5 , whichever is greater
Absolute minimum, resistance
Linearity x total applied voltage for total resistance above 20 , 2.0 % of total applied voltage
for 20  and below
End voltage
Phasing (CCW end points)
Additional sections phased to section 1 within ± 1°
Taps (extra)
Available as special, standard tolerance ± 1°
ORDERING INFORMATION/DESCRIPTION
The Model 852 can be ordered from this datasheet with a variety of alternate characteristics, as shown above. For most rapid service on
your order, please state:
852
C
1
50K
BO1
MODEL
MOUNTING
NUMBER OF SECTIONS
RESISTANCE OF EACH SECTION
PACKAGING
B: Bushing
S: Servo
C: Screw
From 1 up to 3 max.
Beginning with the section nearest
the mounting end
Box of 1 piece
SAP PART NUMBERING GUIDELINES
852
C
1
503
B01
MODEL
STYLE
NUMBER OF SECTION
OHMIC VALUE SECTION No 1
PACKAGING
Revision: 10-Apr-13
Document Number: 57074
125
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 852
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
SERVO MOUNT: 852S/852-2
± 0.010
1.284
(32.61)
BUSHING MOUNT: 852B/852-1
± 0.031
± 0.031
0.812
(20.62)
0.625
(15.88)
Ø 0.2497 TYP. - 0.0003
(6.34)
2 1
0.312
(7.92)
± 0.015
+ 0.0000
0.301 MIN.
(7.64)
0.219 TYP.
(5.56)
0.062
(1.57)
3
+ 0.0000
- 0.0010
+ 0.000
- 0.001
Ø 0.4062
(10.32)
Ø 1.875
(47.62)
± 0.015
Ø 1.812
(46.02)
± 0.015
Ø 2.000
(50.80)
0.562
(14.27)
± 0.015
0.093
(2.36)
MTG. FACE
0.062
(1.57)
MTG. FACE
0.062
(1.57)
0.073 MIN.
(1.85)
3/
8
- 32 UNEF - 2A
Ø 0.125
(3.18)
SCREW MOUNT: 852C/852-3
45°
± 10°
+ 0.0000
2
Ø 0.7500 - 0.0005
(19.05)
CW
± 0.015
3
1
SCHEMATIC
MTG. FACE
0.062
(1.57)
8 - 32 UNC - 2B 0.156
DEEP (3.96) 3
HOLES EQUALLY
SPACED ON A 1.250
Ø (31.75) B.C.
1.062 R MAX.
(26.97)
TOLERANCES: UNLESS OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
ADD 0.992 ± 0.010 (25.20) FOR EACH
ADDITIONAL SECTION
1
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing type
Torque (maximums)
Servo or screw section 1
Bushing section 1
Each additional section
Mechanical runouts (maximums):
Shaft runout (TIR/in)
Pilot dia. runout (TIR)
Lateral runout (TIR)
Shaft end play
Shaft radial play
Weight (maximums)
Single section
Each additional section
Stop strength
Ganging
Moment of inertia
Revision: 10-Apr-13
1080° + 10° - 0°
SERVO
Ball bearing
SCREW
Ball bearing
BUSHING
Sleeve bearing
STARTING
1.20 oz. - in (86.4 g - cm)
1.75 oz. - in (126.0 g - cm)
0.80 oz. - in (57.6 g - cm)
RUNNING
0.80 oz. - in (57.6 g - cm)
1.25 oz. - in (90.0 g - cm)
0.60 oz. - cm (43.2 g - cm)
SERVO/SCREW
0.002" (0.05 cm)
0.002" (0.05 cm)
0.003" (0.08 cm)
0.005" (0.13 cm)
0.002" (0.05 cm)
BUSHING
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.005" (0.13 cm)
0.003" (0.08 cm)
3.5 oz. (99.2 g)
2.7 oz. (76.5 g)
1000 oz. - in, static (72 kg - cm)
3 sections maximum, terminal alignment, added sections
within ± 10° of section 1 terminals
5.5 g - cm2 per section maximum
Document Number: 57074
126
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 852
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
Housing
ENVIRONMENTAL SPECIFICATIONS
Glass filled, thermoset plastic
Lids
Aluminum, anodized
Shaft
Stainless steel, non-magnetic
non-passivated
Terminals
Brass, plated for solderability
Clamp ring
Stainless steel
Bushing mount hardware
Lockwasher internal tooth:
Panel nut:
Steel, nickel plated
Brass nickel plated
Units shall be marked with Spectrol name and
model No, resistance and resistance tolerance,
linearity, terminal identification and date code.
Example of a marking for a standard part:
852-22203503
POWER RATING CHART
(Ratings for cup No 1. Additional cups 75 % of values shown)
RATED POWER IN W
6
5
4
3
2
1
15 g thru 2000 CPS
Shock
50 g
Salt spray
96 h
Rotational life
600 000 shaft revolutions
Load life
MARKING
Unit
identification
Vibration
SPECIAL 150 °C
STANDARD 125 °C
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
Revision: 10-Apr-13
160
900 h
Operating temperature range
- 55 °C to + 125 °C
RESISTANCE ELEMENT DATA
MAXIMUM MAXIMUM
WIRE
STANDARD
RESO- OHMS CURRENT VOLTAGE
TEMP.
RESISTANCE
LUTION PER AT 70 °C ACROSS
COEF.
VALUES
COIL
(%)
TURN AMBIENT
(ppm/°C)
()
(V)
(mA)
20
0.094
0.019
316
6.33
800
50
0.074
0.037
200
10.0
800
100
0.071
0.071
141
14.2
180
200
0.072
0.145
100
20.0
20
500
0.064
0.320
63.2
31.6
20
1K
0.050
0.500
44.7
44.7
20
2K
0.047
0.948
31.6
63.3
20
5K
0.035
1.733
20.0
100
20
10K
0.029
2.923
14.1
142
20
20K
0.024
4.797
10.0
200
20
50K
0.017
8.313
6.32
316
20
100K
0.015
14.535
4.47
447
20
150K
0.013
19.987
3.65
548
20
Document Number: 57074
127
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 860
www.vishay.com
Vishay Spectrol
1 13/16" (46 mm) Ten Turn Wirewound Potentiometer,
Bushing Mount
FEATURES
• Gangable up to 2 sections
• Large range of ohmic values: 20  to 200 k
• Extra taps available upon request
• Ideally suits for all industry applications
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Output by turrets
Market appliance
Industrial
1 13/16" (46 mm)
Dimensions
ELECTRICAL SPECIFICATIONS
PARAMETER
Total resistance
Standard range
Tolerance:
200  and above
Below 200 
20  to 200 k
STANDARD
±3%
±5%
Linearity (independent)
Special up to 500 k
SPECIAL
±1%
±3%
± 0.25 % standard
20  to 50 
50  to 200 
200  to 5 k
5 k and above
± 0.15 %
± 0.10 %
± 0.05 %
± 0.025 %
100  ENR
Noise
Electrical angle
3600° + 4° - 0°
Power rating
8.0 W at 40 °C derated to zero at 125 °C
Insulation resistance
1000 M minimum 500 VDC
Dielectric strength
1000 VRMS, 60 Hz
Not to exceed linearity x total resistance or 1 , whichever is greater
Absolute minimum resistance
End Voltage
0.5 % of total applied voltage maximum
Phasing
CCW end points sect. 2 phased to sect 1 within 1°
Taps (extra)
Available as special standard tolerance ± 1°
ORDERING INFORMATION/DESIGNATION
Model 860 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
860
B
1
20K
BO10
MODEL
BUSHING MOUNT
NUMBER OF SECTIONS
RESISTANCE OF EACH SECTION
PACKAGING
From 1 up to 2 sections
(maximum)
Beginning with the section nearest
the mounting end
Box of 10 pieces
SAP PART NUMBERING GUIDELINES
860
MODEL
Revision: 10-Apr-13
B
1
203
B10
STYLE
NUMBER OF
SECTIONS
OHMIC VALUE OF
SECTION No 1
PACKAGING
Document Number: 57093
128
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 860
www.vishay.com
Vishay Spectrol
DIMENSIONS in inches (millimeters)
MODEL: 860B/860-1
MTG. FACE
2
± 0.015
2.000
(50.80)
0.250 MIN.
(6.35)
± 0.031
0.812
(20.62)
0.312
(7.92)
0.062
(1.57)
0.030 MAX.
(0.76)
0.010
(0.25)
2 1
± 0.015
3/
3
8
± 0.015
0.218
(5.54)
- 32 UNEF - 2A
± 0.015
1.812
(46.02)
0.562
(14.27)
0.062
(1.57)
+ 0.0000
- 0.0003
Ø 0.2497
(6.34)
Ø 0.125
(3.18)
+ 0.0000
Ø 0.4062 MTG.- 0.0020
(10.32)
2
1
CW
ADD 1.787 ± 0.010 (45.39) FOR 2 GANG UNIT
3
1
TOLERANCES: OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
3600° + 4° - 0°
Bearing type
Torque (maximums):
Section 1
Section 2
Runouts (maximums)
Shaft (TIR)
Pilot dia (TIR)
Lateral (TIR)
Shaft end play
Shaft radial play
Weight (maximums)
Single section
Additional section
Stop strength
Ganging
Moment inertia
Revision: 10-Apr-13
Sleeve bearing
STARTING
1.75 oz. - in (126.02 g - cm)
2.55 oz. - in (183.62 g - cm)
RUNNING
1.26 oz. - in (90.01 g - cm)
1.85 oz. - in (133.21 g - cm)
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" min. 0.010" max. (0.05 cm to 0.25 cm)
0.003" max. (0.08 cm)
4.5 oz. (127.58 g)
4.0 oz. (113.40 g)
750 oz. - in (static) (54.01 kg - cm)
2 sections maximum ears of clamp band between
sections positioned 45°, ± 10° CCW from
terminal center line
15.0 g - cm2 maximum
Document Number: 57093
129
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 860
www.vishay.com
Vishay Spectrol
MATERIAL SPECIFICATIONS
Bushing
ENVIRONMENTAL SPECIFICATIONS
Aluminum, nickel plated
Housing and front lid
Vibration
Molded glass filled thermoset
plastic
Rear lid
Stainless steel, non magnetic,
non-passivated
Terminals
Brass, plated for solderability
Mounting hardware
Lockwasher:
Panel nut:
50 g
Rotational life
Molded glass filled nylon
Shaft
10 g thru 500 CPS
Shock
500 000 shaft revolutions
Load life
900 h
Temperature range
- 55 °C to + 125 °C
Salt spray
48 h
Internal tooth steel, nickel plated
Brass, nickel plated
MARKING
Unit identification
Units will be marked with Vishay Spectrol name and model no, resistance and resistance tolerance, linearity,
terminal identification, and date code.
Example of a marking for a standard part: 860-11202
POWER RATING CHART
12
RATED POWER IN W
10
8
6
4
2
0
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE IN °C
RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE VALUES
()
RESOLUTION
(%)
OHMS PER
TURN
MAXIMUM CURRENT
AT 70 °C AMBIENT
(mA)
MAXIMUM VOLTAGE
ACROSS COIL
(V)
WIRE TEMPERATURE
COEFFICIENT
(ppm/°C)
20
0.044
0.009
632
13
800
50
0.027
0.014
400
20
800
100
0.024
0.024
283
28
800
200
0.028
0.056
200
40
180
500
0.023
0.115
126
63
20
1K
0.018
0.182
89
89
20
2K
0.020
0.402
63
126
20
5K
0.015
0.754
40
200
20
10K
0.013
1.23
28
283
20
20K
0.010
1.97
20
400
20
50K
0.007
3.69
13
632
20
100K
0.007
6.51
8.9
894
20
200K
0.005
9.63
5.0
1000
20
500K
0.004
20.0
2.0
1000
20
Revision: 10-Apr-13
Document Number: 57093
130
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Rotational
Single Turn Models
Industrial Market Applications
Non-Contacting
Hall Effect
Sensors
Model 351 HE ....................... 132
Model 601 HE ....................... 136
Model 631 HE ....................... 138
Model 981 HE ....................... 142
Model 151 HE ....................... 147
Professional Market Applications
Model 50 SHE ....................... 151
Model 78 SHE ....................... 155
Kit Models
RM HE................................... 159
Multiturn Models
34 THE .................................. 163
Linear
20 LHE .................................. 169
Model 351 HE
www.vishay.com
Vishay Spectrol
Single Turn Bushing Mount Hall Effect
Sensor in Size 09 (22.2 mm)
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Long life: greater than 10M cycles
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn hall effect
Wires
Industrial
Dimensions
7/8" (22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
Electrical angle
Linearity
Supply voltage
Supply current
STANDARD
SPECIAL
90°, 180°, 270°, 360°
Any other angle upon request
±1%
± 0.5 %
Other upon request
5 VDC ± 10 %
10 mA typical
16 mA for PWM output
Analog ratiometric 10 % to 90 % of Vsupply or
Other upon request
PWM 10 % to 90 % duty cycle
+ 20 VDC
- 10 VDC
Min. 1 k for analog output and PWM output
< 0.2 %
Output signal
Over voltage protection
Reverse voltage protection
Load resistance recommanded
Hysteresis
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
360° continuous, stops upon request: 340° ± 3°
Bearing type
Sleeve bearing
Standard
IP 50; other on request
Weight
20 g ± 2 g
ORDERING INFORMATION/DESCRIPTION
351HE
A
1
W
A
1S22
XXXX
FEATURES
LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
0: Continuous rotation
and antirotation pin
1: Continuous rotation
and no antirotation
pin
2: Stops at 330° and
antirotation pin
3: Stops at 330° and
no antirotation pin
A: ± 1 %
B: ± 0.5 %
MODEL
0
1: 90°
2: 180°
3: 270°
4: 360°
9: Other
angles
0: 6 mm
W: Wires A: Analog CW
Z: Custom B: Analog CCW 1: 6.35 mm
C: PWM CW 2: 3.175 mm
9: Special
D: PWM CCW
P: Plain
Z: Other output
S: Slotted
Z: Other type
BO 10
e1
PACKAGING
LEAD
FINISH
Box of 10
pieces
Shaft length from mounting face 22 mm to 72 mm max. per step of 5 mm
SAP PART NUMBERING GUIDELINES
351HE
1
MODEL
MECHANICAL
FEATURES
Revision: 06-Sep-12
B
9
Z
C
LINEARITY
ELECTRICAL
TYPE
OUTPUT
ANGLE
OUTPUT
SIGNAL
0P27
XXXX
SHAFT TYPE
SPECIAL
REQUEST
Document Number: 57099
132
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 351 HE
www.vishay.com
Vishay Spectrol
VOUT ANALOG
Operating temperature
85 °C
125 °C
Diagnostic high level
96 % min.
96 % min.
Diagnostic low level
2 % max.
4 % max.
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
Diagnostic High Area
Diag High Level
90 %
CCW
CW
10 %
Diag Low Level
10 %
Diag Low Level
Diagnostic Low Area
0
Theta
(Position)
Diagnostic Low Area
0
Theta
(Position)
VOUT PWM
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time (µs)
T: periodicity
Revision: 06-Sep-12
Document Number: 57099
133
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 351 HE
www.vishay.com
Vishay Spectrol
DIAGNOSTIC MODES
Vout ANALOG
Rpull-up
Vout ANALOG
Rpull-down
Vout PWM
Rpull-up = 1 k
Vpull-up = Vsupply = 5 V
1: Broken GND
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
2: Broken Vout
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
3: Broken Vsupply
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Over voltage Vsupply > 7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Under voltage Vsupply < 2.7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
FAILURE
Vpull-up
Vsupply
3
Rpull-up
Vpull-up can be independent to Vsupply
Sensor
2
GND
Vout
1
Cut off
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
20 g from 10 Hz to 2000 Hz
3 shocks/axis; 50 g half a sine 11 ms
Operating temperature range
- 45 °C; + 125 °C
Life
> 10M of cycles
Rotational speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
120 rpm
200 V/m 150 kHz/1 GHz
200 A/m 50 Hz/60 Hz
30 MHz/1 GHz < 30 dBμV/m
Contact discharges: ± 4 kV
Air discharges: ± 8 kV
MATERIALS
Housing
Thermoplastic housing
Bushing
Brass nickel plated
Shaft
Output
Stainless steel
3 lead wires
BUSHING MOUNT HARDWARE
Lockwasher internal tooth
Steel nickel plated
Panel nut
Brass nickel plated
Revision: 06-Sep-12
Document Number: 57099
134
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 351 HE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
22 ± 0.8
15.8 ± 0.4
1.07 ± 0.2 (2)
0.4 x 45°
0
(3)
Ø 6.35 -0.036
Ø 9.525
3/8 - 32 UNEF-2A
Ø 22.7 ± 0.13
Ø 1.57 ± 0.1 (2)
0.8 ± 0.2 (1)
VISHAY
8.9
1 ± 0.2 (1)
3 WIRES
AWG 20
LENGTH: 300 mm
7.92 (2)
9.5
YELLOW
GREEN
RED
CW OR CCW ACCORDING
OUTPUT MODE CHOICE
GENERAL TOLERANCE: ± 0.5 mm
VI
SH
AY
Vsupply = GREEN WIRE
Gnd = YELLOW WIRE
Vout = RED WIRE
VIEWED FROM SHAFT
Notes
(1)
(2)
(3)
For version slotted shaft
For version non turn pin
For shaft type “1“
MARKING
Unit
Identification
Revision: 06-Sep-12
Manufacturer’s name and complete sap part reference, date code, and wiring correspondance: colors
versus connections.
Document Number: 57099
135
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 601 HE
www.vishay.com
Vishay Spectrol
Full 360° Smart Sensor (Hall Effect Technology)
FEATURES
• Absolute ratiometric output over 360° range with
no dead band
• Self-contained package not requiring external
electronic interface
• Contactless technology
• Reverse polarity protection
• Non volatile positioning output
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ROTATIONAL, single turn hall effect
Output by pins (connector)
Industrial
Dimensions
33 mm x 44 mm x 20 mm
The model 601-HE represents a new generation of smart sensors in contactless technology based on the hall effect principle.
This unique electronic device is a self-contained package which provides an analog electrical output over a full 360° without the
need of external electronics. The low power consumption and non-volatile output makes this universal sensor the real
cost-effective alternative to encoders.
STANDARD ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Supply
Supply current
Rotational speed (max.)
120 RPM
16 mA max.
Operating torque max.
0.25 oz.-in (18 g-cm)
Over voltage protection
Weight
10 V
Independent linearity
Electrical track
Output ramp slope
Temperature coefficient
30 g
±1%
360° continuous
Analog voltage output
360° continuous
4.5 VDC to 5.5 VDC
ENVIRONMENTAL SPECIFICATIONS
5 % to 95 %
of supply (ratiometric) CW or CCW
see graphs on next page
Electrically switchable see graphs
5 000 000 Cycles
Operating temperature range
- 45 °C to + 85 °C
Storage temperature range
- 45 °C to + 85 °C
Sealing
Vout/T 125 μV/°C typ.
Hysteresis static
Operating life
IP54
0.8° max.
ORDERING INFORMATION/DESCRIPTION
601 HE
0000
BO1
e4
MODEL
CONFIGURATION
CODE
PACKAGING
LEAD FINISH
Product
Number
Ø 1.57 PIN
Ø 3.18 PIN
0000
Yes
Yes
0001
Yes
-
0002
-
Yes
0003
-
-
Box of 1 piece
SAP PART NUMBERING GUIDELINES
Revision: 25-Jul-12
601 HE
0001
B01
MODEL
PIN CONFIGURATION
PACKAGING
Document Number: 57094
136
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 601 HE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
42
20
Ø 1.57
Ø 6.35
.
0.80
- 32 UNEF 2A
Ø 3.18
ANTI-ROTATION
PIN OPTION TO BE
SPECIFIED SEE
ORDERING
INFORMATION
8
27.8
23.5
8.0
14.3
3/
1.6
33
PIN CONNECTIONS
Spectrol
44
PAT. APP. 99087991
HE-XXXX
XXXX
1234
FUNCTION
1
+5V
2
0V
3
Output
O/P voltage
4
Direction
Connected to 0 V: CCW
Open circuit or connected to 5 V: CW
Supply
PRODUCT NO. DATE
CODE AND TERMINAL
I.D. LABEL
MATERIAL SPECIFICATIONS
Housing
Plastic
Bushing
Brass, nickel plated
Shaft
Stainless steel
Pin terminal connector
Gold plated
Pin header to suit IDC
connectors. e.g. Panduit
C100 - F22 and Molex 7880
Output connection
Bushing mount hardware
lock washer, internal tooth
Steel, nickel plated
Panel nut
Brass, nickel plated
CABLE ASSEMBLY FOR CONNECTION
Part number
Description
601-1056-0000
Molex KK
4-way crimp connector
4 wire (250 mm)
SUPPLY (5 V NOM)
95 %
95 %
SUPPLY (5 V NOM)
TRANSITION TIME
50 µs TYP.
5%
5%
TRANSITION TIME
50 µs TYP.
0360
CW SHAFT ROTATION (°)
MODEL: 601 HE when pin 4
connected to 5 V or open circuit
Revision: 25-Jul-12
CW SHAFT ROTATION (°)
MODEL: 601 HE when pin 4
connected to 0 V
Document Number: 57094
137
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 631 HE
www.vishay.com
Vishay Spectrol
Single Turn Bushing Mount Hall Effect
Sensor in Size 09 (22.2 mm)
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Long life: over 20M cycles
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Robust tool machined aluminum housing
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn hall effect
Wires
Industrial
Dimensions
7/8" (22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
Electrical angle
Linearity
Supply voltage
Supply current
SPECIAL
90°, 180°, 270°, 360°
Any other angle upon request
±1%
± 0.5 %
Other upon request
5 VDC ± 10 %
10 mA typical
16 mA for PWM output
Analog ratiometric 10 % to 90 % of Vsupply or
Other upon request
PWM 10 % to 90 % duty cycle
+ 20 VDC
- 10 VDC
Min. 1 k for analog output and PWM output
< 0.2 %
Output signal
Over voltage protection
Reverse voltage protection
Load resistance recommanded
Hysteresis
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
360° continuous
Bearing type
Sleeve bearing
Ball bearing upon request
Standard
IP 50; other on request
Weight
20 g ± 2 g
ORDERING INFORMATION/DESCRIPTION
631HE
MODEL
0
FEATURES
0:Continuous
rotation and
antirotation pin
1: Continuous
rotation and no
antirotation pin
A
1
W
A
1S22
XXXX
LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
A: ± 1 %
B: ± 0.5 %
1: 90°
2: 180°
3: 270°
4: 360°
9: Other
angles
0: 6 mm
1: 6.35 mm
A: Analog CW
2: 3.175 mm
B: Analog CCW
9: Special
C:
PWM
CW
W: Wires
P: Plain
Z: Custom D: PWM CCW
S: Slotted
Z: Other output
Z: Other
type
BO 10
e1
PACKAGING
LEAD
FINISH
Box of 10
pieces
Shaft length from mounting face 22 mm to 72 mm max. per step of 5 mm
SAP PART NUMBERING GUIDELINES
631HE
1
MODEL
MECHANICAL
FEATURES
Revision: 23-Jul-12
B
9
LINEARITY
ELECTRICAL
ANGLE
Z
C
OUTPUT TYPE
OUTPUT
SIGNAL
0P27
XXXX
SHAFT TYPE
SPECIAL
REQUEST
Document Number: 57100
138
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 631 HE
www.vishay.com
Vishay Spectrol
VOUT ANALOG
Operating temperature
85 °C
125 °C
Diagnostic high level
96 % min.
96 % min.
Diagnostic low level
2 % max.
4 % max.
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
Diagnostic High Area
Diag High Level
90 %
CCW
CW
10 %
Diag Low Level
10 %
Diag Low Level
Diagnostic Low Area
0
Theta
(Position)
Diagnostic Low Area
0
Theta
(Position)
VOUT PWM
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time (µs)
T: periodicity
Revision: 23-Jul-12
Document Number: 57100
139
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 631 HE
www.vishay.com
Vishay Spectrol
DIAGNOSTIC MODES
Vout ANALOG
Rpull-up
Vout ANALOG
Rpull-down
Vout PWM
Rpull-up = 1 k
Vpull-up = Vsupply = 5 V
1: Broken GND
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
2: Broken Vout
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
3: Broken Vsupply
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Over voltage Vsupply > 7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Under voltage Vsupply < 2.7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
FAILURE
Vpull-up
Vsupply
3
Rpull-up
Vpull-up can be independent to Vsupply
Sensor
2
GND
Vout
1
Cut off
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
Operating temperature range
Life
20 g from 10 Hz to 2000 Hz
3 shocks/axis; 50 g half a sine 11 ms
- 45 °C to + 125 °C
20M of cycles
Rotational speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
120 RPM
200 V/m 150 kHz/1 GHz
200 A/m 50 Hz/60 Hz
30 MHz/1 GHz < 30 dB μV/m
Contact discharges: ± 4 kV
Air discharges: ± 8 kV
MATERIALS
Housing
Shaft
Output
Aluminum anodized
Stainless steel
3 lead wires
BUSHING MOUNT HARDWARE
Lockwasher internal tooth
Steel nickel plated
Panel nut
Brass nickel plated
Revision: 23-Jul-12
Document Number: 57100
140
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 631 HE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
3 WIRES
AWG 20
LG = 300 mm
8
3/
Ø 9.52 x 0.79
Ø 8 max.
0.8 ± 0.2 (1)
0
(2)
Ø 6.35 -0.036
Ø 22.2 ± 0.13
- 32 NEF-2A
Ø 9.52 ± 0.1
1 ± 0.2 (1)
7 MIN.
22.2 ± 0.8
16.5 ± 0.4
CW OR CCW ACCORDING TO
OUTPUT MODE CHOICE
Vsupply = GREEN WIRE
Gnd = YELLOW WIRE
Vout = RED WIRE
VIEWED FROM SHAFT
Dimensions in millimeter
Delivered with nut and washer
Notes
(1) For version slotted shaft
(2) For shaft type “1“
MARKING
Unit identification
Revision: 23-Jul-12
Manufacturer’s name and complete sap part reference, date code, and wiring correspondance: colors
versus connections.
Document Number: 57100
141
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 981 HE
www.vishay.com
Vishay Spectrol
Throttle Position Sensor in Hall Effect Technology
Hollow and D-Shaft Versions
FEATURES
• Accurate linearity down to: ± 0.5 %
• Easy mounting principle
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Spring loaded types available
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn hall effect
Wires
Industrial
Dimensions
47 mm x 22 mm
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Electrical angle
90°, 120°, 180°, 270°, 360°
Any other angle upon request
Linearity
±1%
± 0.5 %
5 VDC ± 10 %
Other upon request
Supply current
10 mA typical/16 mA max.
16 mA for PWM output
Output signal
Analog ratiometric 10 % to 90 % of Vsupply or
PWM 1 kHz, 10 % to 90 % duty cycle
Other upon request
Supply voltage
Over voltage protection
+ 20 VDC
Reverse voltage protection
- 10 VDC
Load resistance recommended
Min. 1 k for analog output and PWM output
Hysteresis static (D-shaft version)
< 0.3°
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
360° continuous, stops upon request: 124° ± 3°
Bearing type
Sleeve bearing
Standard
IP 50; other on request
Weight
19 g ± 2 g hollow shaft model/22 g ± 2 g D-shaft model
ORDERING INFORMATION/DESCRIPTION
981HE
A
1
W
A
1F16
XXXX
FEATURES
LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
0: Continuous rotation
1: Mechanical stops
2: Spring return CW
3: Spring return CCW
A: ± 1 %
B: ± 0.5 %
A: Analog CW
B: Analog CCW
C: PWM CW
D: PWM CCW
Z: Other output
1: 6.35 mm
9: Special
P: Plain
F: Flatted
S: Slotted
Z: Other type
MODEL
0
For 1, 2, 3: Max.
electrical angle is: 120°
W: Wires
1: 90°
Z: Custom
2: 180°
3: 270°
4: 360°
5: 120°
9: Other angles
BO 10
e1
PACKAGING
LEAD
FINISH
Box of
10 pieces
Shaft length from mounting face (standard: 16 mm)
8H00 hollow shaft
8H01 hollow D-shaft
SAP PART NUMBERING GUIDELINES
981HE
1
MODEL
MECHANICAL
FEATURES
Revision: 29-May-13
B
9
LINEARITY
ELECTICAL
ANGLE
Z
C
OUTPUT TYPE
OUTPUT
SIGNAL
8H01
XXXX
SHAFT TYPE
SPECIAL
REQUEST
Document Number: 57103
142
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 981 HE
www.vishay.com
Vishay Spectrol
VOUT ANALOG
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
Diagnostic High Area
Diag High Level
90 %
CCW
CW
10 %
Diag Low Level
10 %
Diag Low Level
Diagnostic Low Area
0
Theta
(Position)
Diagnostic Low Area
0
Theta
(Position)
VOUT PWM
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time (µs)
T: periodicity
Revision: 29-May-13
Document Number: 57103
143
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 981 HE
www.vishay.com
Vishay Spectrol
DIAGNOSTIC MODES
Vout ANALOG
Rpull-up
Vout ANALOG
Rpull-down
Vout PWM
Rpull-up = 1 k
Vpull-up = Vsupply = 5 V
1: Broken GND
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
2: Broken Vout
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
3: Broken Vsupply
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Over voltage Vsupply > 7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Under voltage Vsupply < 2.7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
FAILURE
Vpull-up
Vsupply
3
Rpull-up
Vpull-up can be independent to Vsupply
Sensor
2
GND
Vout
1
Cut off
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
Operating temperature range
Life (in cycles)
Rotational speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
20 g from 10 Hz to 2000 Hz, EN 60068-2-6
3 shocks/axis; 50 g half a sine 11 ms, EN 60068-2-7
- 45 °C to+ 125 °C
> 5M for hollow shaft model/> 10M for D-shaft model
120 rpm
200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A)
30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A)
Contact discharges: ± 8 kV
Air discharges: ± 15 kV, EN 61000-4-2
MATERIALS
Housing
Shaft
Output
Revision: 29-May-13
Thermoplastic housing
Stainless steel
3 lead wires
Document Number: 57103
144
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 981 HE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
VARIOUS POSSIBLE TYPES OF MODEL 981 HE
IN D-SHAFT VERSION
1
981 HE D-Shaft
Spring return CCW
Shaft: Ø 6.35 flatted length 16 mm FMF
2
981 HE D-Shaft
Spring return CW
Shaft: Ø 6.35 flatted 16 mm FMF
Model: 981HE-2-x-x-W-x-1F16
Model: 981HE-3-x-x-W-x-1F16
0
Ø 15 - 0.1
Mounting face
22 max.
5
3
16.2
0
Ø 6.345 - 0.013
“0 position”
Prog CW: 90 %
Prog CCW: 10 %
2° Typ.
“0 position”: 120°
Mechanical
stroke
Ø 24 max.
3
“0 position”
Prog CW: 10 %
Prog CCW: 90 %
Mech. stop
B
A
4.5 ± 0.1
20°
11
Direction
of running
4.5
2°
Typ.
Direction
of running
981 HE D-Shaft
Continuous rotation
Shaft: Ø 6.35 flatted 16 mm FMF
Model: 981HE-0-x-x-W-x-1F16
“0 position”
Prog CW or CCW: 10 %
3 wires
AWG20
lg 300 mm
Mechanical
stroke
Dimension Standard
Option
A
36
38
B
47
48
Revision: 29-May-13
Wires
Yellow GND (-)
Red
Signal
Green VCC (+)
Document Number: 57103
145
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 981 HE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
VARIOUS POSSIBLE TYPES OF MODEL 981 HE
IN HOLLOW SHAFT VERSION
4
981 HE Hollow shaft
Spring return CCW
Shaft: Ø 8
6
Model: 981HE-3-x-x-W-x-8H00
981 HE Hollow D-Shaft
Continuous rotation
Shaft: Ø 8
Model: 981HE-0-x-x-W-x-8H01
“0 position”
Prog CW: 10 %
Prog CCW: 90 %
3 ± 0.1
Ø 7.8 - 00.2 2 min.
Model: 981HE-1-x-x-W-x-8H01
“0 position”
Prog CW or
CCW: 10 %
Mechanical stop
End shaft recommended
7 981 HE Hollow D-Shaft
CW
Shaft: Ø 8
“0 position”
Prog CW: 10 %
2° Typ.
2° Typ.
Mounting face
Direction
of running
Direction
of running
7 max.
Mechanical
stroke
End shaft recommended
981 HE Hollow shaft
Spring return CW
Shaft: Ø 8
Ø8
Mechanical stop
“0 position”
Prog CW: 90 %
Prog CCW: 10 %
2°
Typ.
8
981 HE Hollow D-Shaft
CCW
Shaft: Ø 8
Model: 981HE-1-x-x-W-x-8H01
Ø 6.54 - 00.05
“0 position”
Prog CCW: 10 %
Direction
of running
2° Typ.
“0 position”: 120°
Mechanical stroke
Revision: 29-May-13
0
h9 - 0.036
Mounting face
2 min.
Model: 981HE-2-x-x-W-x-8H00
7 max.
5
Mechanical
stroke
Direction of
running
“0 position”:
120°
Mechanical
stroke
Document Number: 57103
146
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 151 HE
www.vishay.com
Vishay Spectrol
Industrial Servo Mount Hall Effect
Sensor in Size 09 (22.2 mm)
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Long life: greater than 10M cycles
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn hall effect
Output by turrets
Industrial
Dimensions
7/8" (22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Electrical angle
90°, 180°, 270°, 360°
Any other angle upon request
Linearity
±1%
± 0.5 %
5 VDC ± 10 %
Other upon request
Supply current
10 mA typical/16 mA max.
16 mA for PWM output
Output signal
Analog ratiometric 10 % to 90 % of Vsupply or
PWM 1 kHz, 10 % to 90 % duty cycle
Other upon request
Supply voltage
Over voltage protection
+ 20 VDC
Reverse voltage protection
- 10 VDC
Load resistance recommended
Min. 1 k for analog output and PWM output
Hysteresis static
< 0.2°
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
360° continuous
Bearing type
2 ball bearings
Standard
IP 50; other on request
ORDERING INFORMATION/DESCRIPTION
151HE
1
A
1
T
A
2S12
XXXX
BO 10
e1
MODEL
FEATURES
LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
PACKAGING
LEAD
FINISH
1: Continuous rotation
and no antirotation
pin
A: ± 1 %
B: ± 0.5 %
T: Turrets A: Analog CW 2: 3.175 mm
1: 90°
Z: Custom B: Analog CCW 9: Special
2: 180°
P: Plain
C: PWM CW
3: 270°
S: Slotted
D: PWM CCW
4: 360°
Z: Other output Z: Other type
9: Other angles
Box of
10 pieces
Shaft length from mounting face 12 mm to 72 mm max. per step of 5 mm
SAP PART NUMBERING GUIDELINES
151HE
1
MODEL
MECHANICAL
FEATURES
Revision: 23-Jul-12
B
9
LINEARITY
ELECTRICAL
ANGLE
Z
C
OUTPUT TYPE
OUTPUT
SIGNAL
2P22
XXXX
SHAFT TYPE
SPECIAL
REQUEST
Document Number: 57102
147
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 151 HE
www.vishay.com
Vishay Spectrol
VOUT ANALOG
Operating temperature
85 °C
125 °C
Diagnostic high level
96 % min.
96 % min.
Diagnostic low level
2 % max.
4 % max.
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
Diagnostic High Area
Diag High Level
90 %
CCW
CW
10 %
Diag Low Level
10 %
Diag Low Level
Diagnostic Low Area
0
Theta
(Position)
Diagnostic Low Area
0
Theta
(Position)
VOUT PWM
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time (µs)
T: periodicity
Revision: 23-Jul-12
Document Number: 57102
148
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 151 HE
www.vishay.com
Vishay Spectrol
DIAGNOSTIC MODES
Vout ANALOG
Rpull-up
Vout ANALOG
Rpull-down
Vout PWM
Rpull-up = 1 k
Vpull-up = Vsupply = 5 V
1: Broken GND
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
2: Broken Vout
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
3: Broken Vsupply
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Over voltage Vsupply > 7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Under voltage Vsupply < 2.7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
FAILURE
Vpull-up
Vsupply
3
Rpull-up
Vpull-up can be independent to Vsupply
Sensor
2
GND
Vout
1
Cut off
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
20 g from 10 Hz to 2000 Hz, EN 60068-2-6
3 shocks/axis; 50 g half a sine 11 ms, EN 60068-2-7
Operating temperature range
- 45 °C; + 125 °C
Life
> 10M of cycles
Rotational speed (max)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
120 rpm
200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A)
30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A)
Contact discharges: ± 4 kV
Air discharges: ± 8 kV, EN 61000-4-2
MATERIALS
Housing
Mounting type
Shaft
Output
Revision: 23-Jul-12
Anodized aluminum
Servo
Stainless steel
Standard: 3 turrets (other on request)
Document Number: 57102
149
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 151 HE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
1.6 ± 0.1
1.6 ± 0.1
2.8
1.6 ± 0.1
0
Ø 19.05 - 0.025
12 ± 0.8
Ø 22.2
Ø 19.8 max.
Ø 3.175
0
- 0.013
CW
15.2 ± 0.5
9
4.5
-: GND
11.2
4.7
+: V supply
3x
Ø1
.7
S: Signal
Dimensions in mm
General tolerances: ± 0.5mm
Revision: 23-Jul-12
Document Number: 57102
150
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 50 SHE
www.vishay.com
Vishay Sfernice
Single Turn Servo Mount Hall Effect Sensor in Size 05 (12.7 mm)
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Long life: Greater than 50M cycles
• Non contacting technology: Hall effect
• Smallest size available
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn hall effect
Wires
Professional
Dimensions
½" (12.7 mm) dia.
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Electrical angle
90°, 180°, 270°, 360°
Any other angle upon request
Linearity
±1%
± 0.5 %
5 VDC ± 10 %
Other upon request
Supply current
10 mA typical/16 mA max.
16 mA for PWM output
Output signal
Analog ratiometric 10 % to 90 % of Vsupply or
PWM 1 kHz, 10 % to 90 % duty cycle
Other upon request
Supply voltage
Over voltage protection
+ 20 VDC
Reverse voltage protection
- 10 VDC
Load resistance recommended
Min. 1 k for analog output and PWM output
Hysteresis static
< 0.2° max.
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
360° continuous
Bearing type
2 ball bearings
Standard
IP 51; other on request
ORDERING INFORMATION/DESCRIPTION
50 SHE
1
A
1
W
A
2S16
XXXX
BO 10
e1
MODEL
NUMBER
OF CUP
LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
PACKAGING
LEAD
FINISH
1:1 Cup
A: ± 1 %
B: ± 0.5 %
1: 90°
2: 180°
3: 270°
4: 360°
9: Other
angles
W: Wires A: Analog CW 2: 3.175 mm
Z:
B: Analog CCW 9: Special
P: Plain
Custom
C: PWM CW
S: Slotted
D: PWM CCW
Z: Other
Z: Other output
type
Box of 10
pieces
Shaft length from mounting face, standard: 16 mm
SAP PART NUMBERINGGUIDELINES
50 SHE
1
B
9
Z
C
2P22
XXXX
MODEL
1: 1 cup
OUTPUT
SIGNAL
LINEARITY
ELECTRICAL
ANGLE
OUTPUT TYPE
OUTPUT
SIGNAL
SHAFT TYPE
SPECIAL
REQUEST
Revision: 25-Jul-12
Document Number: 57104
151
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 50 SHE
www.vishay.com
Vishay Sfernice
VOUT ANALOG
Operating temperature
85 °C
125 °C
Diagnostic high level
96 % min.
96 % min.
Diagnostic low level
2 % max.
4 % max.
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
Diagnostic High Area
Diag High Level
90 %
CCW
CW
10 %
Diag Low Level
10 %
Diag Low Level
Diagnostic Low Area
0
Theta
(Position)
Diagnostic Low Area
0
Theta
(Position)
VOUT PWM
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time (µs)
T: periodicity
Revision: 25-Jul-12
Document Number: 57104
152
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 50 SHE
www.vishay.com
Vishay Sfernice
DIAGNOSTIC MODES
Vout ANALOG
Rpull-up
Vout ANALOG
Rpull-down
Vout PWM
Rpull-up = 1 k
Vpull-up = Vsupply = 5 V
1: Broken GND
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
2: Broken Vout
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
3: Broken Vsupply
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Over Voltage Vsupply > 7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Under Voltage Vsupply < 2.7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
FAILURE
Vpull-up
Vsupply
3
Rpull-up
Vpull-up can be independent to Vsupply
Sensor
2
GND
Vout
1
Cut off
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
20 g from 10 Hz to 2000 Hz, EN 60068-2-6
3 shocks/axis; 50 g half a sine 11 ms, EN 60068-2-7
Operating temperature range
- 40 °C; + 125 °C
Life
> 50M of cycles
Rotational speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
120 rpm
200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A)
30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A)
Contact discharges: ± 4 kV
Air discharges: ± 8 kV, EN 61000-4-2
MATERIALS
Housing
Shaft
Output
Revision: 25-Jul-12
Aluminum
Stainless steel
3 lead wires (AWG 24)
Document Number: 57104
153
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 50 SHE
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters
12.7 ± 0.8
Ø 11 ± 0.1
0.4 x 45°
Ø 3.175 max. - 0.013
Ø 12.6 ± 0.1
19.5 ± 0.5
1.6 ± 0.1
Ø 12.6 ± 0.1
1.6 ± 0.1
Ø 9.5 ± 0.013
0
1.6 ± 0.1
AWG 24
l = 300 mm
3 wires
CW or CCW according
to output mode choice
1:1
Vsupply = Green wire
GND = Yellow wire
Vout = Red wire
General tolerance: ± 0.5 mm
Revision: 25-Jul-12
View from shaft side
Document Number: 57104
154
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 78 SHE
www.vishay.com
Vishay Sfernice
Single Turn Servo Mount Hall Effect
Sensor in Size 09 (22.2 mm)
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Very long life: Greater than 50M cycles
• Non contacting technology: Hall effect
• Model dedicated to high quality applications
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
ROTATIONAL, single turn hall effect
Wires
Professional
Dimensions
7/8" (22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Electrical angle
90°, 180°, 270°, 360°
Any other angle upon request
Linearity
±1%
± 0.5 %
Supply voltage
5 VDC ± 10 %
Other upon request
Supply current
10 mA typ./16 mA max.
16 mA for PWM output
Output signal
Analog ratiometric 10 % to 90 % of Vsupply or
PWM 1 kHz, 10 % to 90 % duty cycle
Other upon request
Over voltage protection
+ 20 VDC
Reverse voltage protection
- 10 VDC
Load resistance recommended
Min. 1 k for analog output and PWM output
Hysteresis static
0.2° max.
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
360° continuous, stops upon request
Bearing type
2 ball bearings
Standard
IP 50; other on request
ORDERING INFORMATION/DESCRIPTION
78 SHE
1
MODEL
NUMBER
OF CUPS
1: 1 Cup
2: 2 Cups
3: 3 Cups
4: 4 Cups
A
1
W
A
1S16
XXXX
LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
A: ± 1 %
B: ± 0.5 %
1: 90°
2: 180°
3: 270°
4: 360°
9: Other
angles
0: 6 mm
T: Turrets A: Analog CW
W: Wires B: Analog CCW 1: 6.35 mm
Z: Custom C: PWM CW 2: 3.175 mm
9: Special
D: PWM CCW
P: Plain
Z: Other output
S: Slotted
Z: Other type
BO 1
e1
PACKAGING
LEAD
FINISH
Box of
1 piece
Shaft length from mounting face standard: 16 mm
SAP PART NUMBERING GUIDELINES
78 SHE
4
B
9
T
C
2P22
XXXX
MODEL
NUMBER OF
CUPS
(Signals)
LINEARITY
ELECTRICAL
ANGLE
OUTPUT TYPE
OUTPUT
SIGNAL
SHAFT TYPE
SPECIAL
REQUEST
Revision: 23-Jul-12
Document Number: 57105
155
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 78 SHE
www.vishay.com
Vishay Sfernice
VOUT ANALOG
Operating temperature
85 °C
125 °C
Diagnostic high level
96 % min.
96 % min.
Diagnostic low level
2 % max.
4 % max.
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
Diagnostic High Area
Diag High Level
90 %
CCW
CW
10 %
Diag Low Level
10 %
Diag Low Level
Diagnostic Low Area
0
Theta
(Position)
Diagnostic Low Area
0
Theta
(Position)
VOUT PWM
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time (µs)
T: periodicity
Revision: 23-Jul-12
Document Number: 57105
156
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 78 SHE
www.vishay.com
Vishay Sfernice
DIAGNOSTIC MODES
Vout ANALOG
Rpull-up
Vout ANALOG
Rpull-down
Vout PWM
Rpull-up = 1 k
Vpull-up = Vsupply = 5 V
1: Broken GND
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
2: Broken Vout
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
3: Broken Vsupply
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Over voltage Vsupply > 7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Under voltage Vsupply < 2.7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
FAILURE
Vpull-up
Vsupply
3
Rpull-up
Vpull-up can be independent to Vsupply
Sensor
2
GND
Vout
1
Cut off
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
20 g from 10 Hz to 2000 Hz, EN 60068-2-6
3 shocks/axis; 50 g half a sine 11 ms, EN 60068-2-7
Operating temperature range
- 45 °C; + 125 °C
Life
> 50M of cycles
Rotational speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
120 rpm
200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A)
30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A)
Contact discharges: ± 4 kV
Air discharges: ± 8 kV, EN 61000-4-2
MATERIALS
Housing
Shaft
Output
Revision: 23-Jul-12
Thermoplastic housing
Stainless steel
3 turrets or 3 lead wires (AWG 22)
Document Number: 57105
157
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 78 SHE
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters
0
Ø 19.05 max. - 0.013
MODEL 78 SHE ...T
(OUTPUT BY TURRETS)
78 SHE (1 signal)
22 max.
30° ±
16 ± 0.8
15.9
30°
2
2
1
15.4 max.
Ø 3.175 - 0.013
Ø 22.3 max.
Ø 19.8 max.
3
±2
0
1.6
1.6
CW or CCW according
to output mode choice
1.5 min.
78 SHE (Redundant: 2 signals)
Vsupply = 3
Gnd = 1
Vout = 2
General tolerance: ± 0.5 mm
View from shaft side
Ø 19.05
0
max. - 0.013
MODEL 78 SHE ...W
(OUTPUT BY WIRES)
78 SHE (1 signal)
Shrink tubing
gaine thermoformable
16 ± 0.8
0
Ø 3.175 max. - 0.013
10 max.
Ø 19.8 max.
Ø 22.3 max.
19 min.
1.6
1.6
1.5 min.
25 max.
CW or CCW according
to output mode choice
Vsupply = Green wire
General tolerance: ± 0.5 mm
78 SHE (Redundant: 2 signals)
Gnd = Yellow wire
Vout = Red wire
View from shaft side
Revision: 23-Jul-12
Document Number: 57105
158
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model RM HE
www.vishay.com
Vishay Sfernice
Rotative Transducer Elements in Hall Effect Technology
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Extremely long life: Greater than 100M cycles
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Very reduced dimensions, fitting in small volumes
• Delivered as a kit; 2 elements: Track and wiper
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Kit ROTATIONAL, hall effect
Wires
Industrial
Dimensions
Various sizes
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Electrical angle
90°, 180°, 270°, 360°
Any other angle upon request
Linearity
±1%
± 0.5 %
5 VDC ± 10 %
Other upon request
Supply current
10 mA typ./16 mA max.
16 mA for PWM output
Output signal
Analog ratiometric 10 % to 90 % of Vsupply or
PWM 1kHz, 10 % to 90 % duty cycle
Other upon request
Supply voltage
Over voltage protection
+ 20 VDC
Reverse voltage protection
- 10 VDC
Load resistance recommended
Min. 1 k for analog output and PWM output
Hysteresis static
0.2° max.
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
360° continuous
2 elements
Track with electronic PCs/wiper with magnet
Standard
IP 66; fully sealed product
ORDERING INFORMATION/DESCRIPTION
RMHE
1
MODEL
NUMBER
OF TRACKS
1: 1 cup
(1 signal)
2: 2 cups
(redundant)
A
1
W
A
XXXX
BO 10
e1
LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SPECIAL
REQUEST
PACKAGING
LEAD FINISH
1: 90°
2: 180°
3: 270°
4: 360°
9: Other angles
W: Wires
Z: Custom
A: Analog CW
B: Analog CCW
C: PWM CW
D: PWM CCW
Z: Other output
A: ± 1 %
B: ± 0.5 %
Box of
10 pieces
SAP PART NUMBERING GUIDELINES
RMHE
2
MODEL
NUMBER
OF TRACKS
B
9
LINEARITY
ELECTRICAL
ANGLE
Z
OUTPUT TYPE
C
XXXX
OUTPUT SIGNAL
SPCIAL
REQUEST
Redundant signals
Revision: 23-Jul-12
Document Number: 57106
159
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model RM HE
www.vishay.com
Vishay Sfernice
VOUT ANALOG
Operating temperature
85 °C
125 °C
Diagnostic high level
96 % min.
96 % min.
Diagnostic low level
2 % max.
4 % max.
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
Diagnostic High Area
Diag High Level
90 %
CCW
CW
10 %
Diag Low Level
10 %
Diag Low Level
Diagnostic Low Area
0
Theta
(Position)
Diagnostic Low Area
0
Theta
(Position)
VOUT PWM
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time (µs)
T: periodicity
Revision: 23-Jul-12
Document Number: 57106
160
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model RM HE
www.vishay.com
Vishay Sfernice
DIAGNOSTIC MODES
Vout ANALOG
Rpull-up
Vout ANALOG
Rpull-down
Vout PWM
Rpull-up = 1 k
Vpull-up = Vsupply = 5 V
1: Broken GND
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
2: Broken Vout
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
3: Broken Vsupply
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Over voltage Vsupply > 7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
Under voltage Vsupply < 2.7 V
Diagnostic high area
Diagnostic low area
> 97 % Vsupply
without modulation
FAILURE
Vpull-up
Vsupply
3
Rpull-up
Vpull-up can be independent to Vsupply
Sensor
2
GND
Vout
1
Cut off
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
Operating temperature range
Life
20 g from 10 Hz to 2000 Hz, EN 60068-2-6
3 shocks/axis; 50 g half a sine 11 ms, EN 60068-2-7
- 40 °C to + 150 °C
> 100M of cycles
Rotational speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
120 rpm
200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A)
30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A)
Contact discharges: ± 4 kV
air discharges: ± 8 kV, EN 61000-4-2
MATERIALS
Housing
Mounting type
Shaft (standard: ACAPT W02564)
Output
Revision: 23-Jul-12
Aluminum
Servo
Separated element including a magnet
3 lead wires (AWG22)
length 250 mm ± 10 mm
Document Number: 57106
161
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model RM HE
www.vishay.com
Vishay Sfernice
DIMENSIONS in millimeters
8 ± 0.5
Marking area
Vishay + reference + pinout
1.6
All dimensions are in
ACAPT shaft W02564 specification
0
- 0.013
Ø 24.608
Ø 24.64
Wires length: 250 ± 10 mm AWG 22
Ø 27.05
1.6
(8.3)
Recommended position
Wire
Yellow
Red
Green
General tolerances ± 0.5 mm
GND (-)
Signal
Vcc (+)
ACAPT Shaft W02564
45°
1
Ø 10
Ø7
M6
Ø 6.1
0.5 x 45°
2
5.8 ± 0.1
1.5
0
8 - 0.1
20
Magnet
General tolerances ± 0.5 mm
Revision: 23-Jul-12
Document Number: 57106
162
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
www.vishay.com
Vishay Spectrol
Ten Turns Servo or Bushing Mount Hall Effect
Sensor in Size 09 (22.2 mm)
FEATURES
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
ROTATIONAL, multi turn hall effect
Wires or rear turrets
Industrial
7/8" (22.2 mm)
• All electrical angles available up to: 3600°
• Accurate linearity down to: ± 0.5 %
• Very long life: 50M cycles for servo, 10M cycles
for bushing
• Non contacting technology: Hall effect; true power on
sensor
• Model dedicated to applications requiring long life
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
PARAMETER
Electrical angle
Linearity
Supply voltage
Supply current
STANDARD
SPECIAL
10 turns 3600°
Any other angle upon request
±1%
± 0.5 %
5 VDC ± 10 %
Other upon request
< 16 mA for single
< 32 mA for redundant
Analog ratiometric 1 % to 99 % of Vsupply (other on request)
or PWM 1 kHz, 10 % to 90 % duty cycle or SPI binary on 5 V or binary on 3.3 V
+ 20 VDC
- 10 VDC
Min. 1 k for analog output and PWM output
10° on drive shaft
Output signal
Over voltage protection
Reverse voltage protection
Load resistance recommended
Hysteresis static
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
Bearing type
Standard
Resolution
3600° continuous
A sleeve bearing for bushing model/2 ball bearings for servo model
IP 50; other on request
12 bits for analog and PWM, 14 bits for SPI
ORDERING INFORMATION/DESCRIPTION
34 THE
B
MOUNTING
MODEL
TYPE
B: Bushing
S: Servo
1
NUMBER OF
SIGNALS
1: Single
2: Redundant
A
LINEARITY
A: ± 1 %
B: ± 0.5 %
T
OUTPUT
TYPE
T: Turrets
Z: Custom
W: Wires
A
2S22
XXXX
BO 1
e1
LEAD
OUTPUT
SHAFT
SPECIAL
PACKAGING
FINISH
SIGNAL
TYPE
REQUEST
A: Analog CW
2: 3.175 mm
Box of
B: Analog CCW
9: Special
1 piece
C: PWM CW
P: Plain
D: PWM CCW
S: Slotted
E: SPI CW (1)
Z: Other type
(1)
F: SPI CCW
G: Analog
inverted slope
H: PWM inverted
slope
K: SPI inverted
slope (1)
Z: Other output
Shaft length from mounting face standard: 22 mm
Note
(1) SPI output  output type: Wires
SAP PART NUMBERING GUIDELINES
34 THE
MODEL
S
SERVO
TYPE
2
2 OUTPUT
SIGNALS
B
LINEARITY
T
OUTPUT
TYPE
C
OUTPUT
SIGNAL
2P12
SHAFT
TYPE
XXXX
SPECIAL
REQUEST
B: ± 0.5 %
Revision: 25-Jul-12
Document Number: 57114
163
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
www.vishay.com
Vishay Spectrol
VOUT ANALOG
Single Output (output signal code: “A”)
99 %
Vout (% Vsupply)
Output S1
50 %
1%
0°
1800°
3600°
Direction of Running (°)
Redundant Output: with inverted slope
(output signal code: “G”)
99 %
Vout (% Vsupply)
Output S1
50 %
Output S2
1%
0°
1800°
3600°
Direction of Running (°)
VOUT PWM
Single Output: (output signal code: “C”)
Vout
(% Vsupply)
CW
97 % min.
T high
Duty Cycle =
Thigh
T
T low
1.5 % max.
0
Time
T: Periodicity
VOUT SPI
Notice on demand
Output signal code: “E” if CW (single or redundant identical)
Output signal code: “F” if CCW (single or redundant identical)
Output signal code: “K” if CW (if redundant but inverted slope)
Revision: 25-Jul-12
Document Number: 57114
164
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
www.vishay.com
Vishay Spectrol
MECHANICAL SPECIFICATIONS
PARAMETER
STANDARD
Mounting type
Servo mounting type or bushing mount
(delivered with nut and washer)
Housing
Shaft guiding
SPECIAL
Anodized aluminum
2 ball bearings for servo and sleeve bearing for bushing
Shaft
Outputs
Mechanical travel
Stainless steel Ø 3.175
Other on request
Turrets
Other on request
3600° and no stop
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range
- 40 °C; + 85 °C
> 10M of cycles for bushing
> 50M of cycles for servo
Life
Rotational speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
1200 rpm
200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A)
30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A)
Electrostatic discharges
Contact discharges: ± 4 kV
Air discharges: ± 8 kV, EN 61000-4-2
Sine vibration on 3 axes
1.5 mm or 20 g from 10 Hz to 2000 Hz
Mechanical shocks on 3 axes
Revision: 25-Jul-12
50 g, 11 ms, half sine
Document Number: 57114
165
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
Drawing for bushing mount type: 34THEB...
22 ± 0.8
22.1 ± 0.5
8.9 ± 0.2
1.6 ± 0.1
Label
3.2 ± 0.5
CW
Ø 3.175
+ 0/- 0.013
Ø 9.52 pas 0.79
3/8 - 32 UNEF 2A
Ø 22.2 ± 0.25
0.5 at 45°
Ø 10.3
+ 0/- 0.02
Viewed from shaft side
9
4.5
3 x Ø 1.7 ± 0.2
3.6
3.6
4 x Ø 1.7 ± 0.2
+
-
S2
S1
6.3
4.7
+
-
11.2
S
7.2
Single output
Revision: 25-Jul-12
7.2
Redundant output
Document Number: 57114
166
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
www.vishay.com
Vishay Spectrol
DIMENSIONS in millimeters
Drawing for servo mount type: 34THES...
21.1 ± 0.5
12.7 ± 0.8
1.6 ± 0.1
1.6 ± 0.1
CW
1.6 ± 0.1
Ø 22.2 ± 0.25
Ø 3.175
+ 0/- 0.013
Ø 19.05
+ 0/- 0.025
Ø 19.4 ± 0.25
3.2 ± 0.5
Label
9
4.5
3 x Ø 1.7 ± 0.2
3.6
3.6
4 x Ø 1.7 ± 0.2
+
-
S2
4.7
11.2
S1
+
6.3
-
S
7.2
Single output
Revision: 25-Jul-12
7.2
Redundant output
Document Number: 57114
167
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
www.vishay.com
Vishay Spectrol
BUSHING AND SERVO TYPES
Output by wires for output signal “SPI” single and redundant
SINGLE SPI OUTPUT (servo and bushing)
REDUNDANT SPI OUTPUT (servo and bushing)
WIRE COLOR
OUTPUT
WIRE COLOR
Yellow
GND (-)
Black
V-
Red
MOSI
Red
V+
Green
VCC (+)
Yellow
O/I 1
White
SS
Blue
CLK 1
Blue
SCLK
Revision: 25-Jul-12
OUTPUT
White
/SS 1
Green
O/I 2
Violet
CLK 2
Grey
/SS 2
Document Number: 57114
168
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 LHE
www.vishay.com
Vishay Sfernice
Linear Position Sensor in Hall Effect Technology
(0 mm to 10 mm max.)
FEATURES
• Accurate linearity down to: ± 1 %
• Electrical strokes from 0 mm to 10 mm
• Long life: Greater than 10M cycles
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Output type
Market appliance
Dimensions
LINEAR, non contacting hall effect
Wires
Industrial
46 mm x 20.8 mm x 37 mm
ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
Electrical stroke
Linearity
Supply voltage
Supply current
Output signal
Over voltage protection
Reverse voltage protection
Load resistance recommanded
Hysteresis
Resolution
Up to 10 mm
± 2 % or ± 1 %
5 VDC ± 10 %
< 16 mA typical
Analog ratiometric 10 % to 90 % of Vsupply or PWM 10 % to 90 % duty cycle
+ 20 VDC
- 10 VDC
Min. 1 k for analog output and PWM output
Static: 0.1 % of Vsupply/Dynamic: 0.25 % of Vsupply
12 bits
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
Bearing type
Standard
Weight
12 mm max.
Sleeve bearing
For spring loaded model: IP 51/without spring: Other on request
26 g ± 4 g
ORDERING INFORMATION/DESCRIPTION
20 LHE
1
A
W
A
1P30
xxxx
e1
FEATURES
LINEARITY
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
LEAD
FINISH
1: Spring return
2: Without spring
X: ± 2 %
A: ± 1 %
W: Wires
Z: Custom
A: Analog increasing
B: Analog decreasing
C: PWM increasing
D: PWM decreasing
1: 3.175 mm
9: Special
P: Plain
T: Threaded M3 x 6
Z: Other type
MODEL
Shaft length from mounting face 30 mm when full extended
SAP PART NUMBERING GUIDELINES
20 LHE
MODEL
Revision: 25-Jul-12
2
X
Z
C
1T35
xxxx
FEATURES
LINEARITY
OUTPUT
TYPE
OUTPUT SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
Without spring return system
±2%
“Custom”
PWM increasing
Document Number: 57115
169
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 LHE
www.vishay.com
Vishay Sfernice
VOUT ANALOG
Vout
(% Vsupply)
Vout
(% Vsupply)
Diagnostic High Area
Diag High Level
90 %
10 %
Diag Low Level
Diagnostic High Area
Diag High Level
90 %
10 %
Diag Low Level
Diagnostic Low Area
0
(Position)
Diagnostic Low Area
0
(Position)
Increasing
“Code A”
Decreasing
“Code B”
VOUT PWM
Vout
(% Vsupply)
90 %
T high
Duty Cycle =
Thigh
T
T low
10 %
0
Time (µs)
T: periodicity
ENVIRONMENTAL SPECIFICATIONS
Vibrations
Shocks
20 g from 10 Hz to 2000 Hz
3 shocks/axis; 50 g half a sine 11 ms
Operating temperature range
- 40 °C; + 85 °C
Life
> 10M of cycles
Speed (max.)
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
Electrostatic discharges
Immunity to radiated RF field
Revision: 25-Jul-12
60 mm/s
200 V/m 150 kHz/1 GHz
IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz
EN 61000-4-8
30 MHz/1 GHz < 30 dBμV/m
EN 61000-6-4
Contact discharges: ± 4 kV
Air discharges: ± 8 kV
EN 61000-4-2
10 V/m
80 MHz to 1 GHz
EN6100-4-3
Document Number: 57115
170
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 LHE
www.vishay.com
Vishay Sfernice
ENVIRONMENTAL SPECIFICATIONS
Materials
Housing
Thermoplastic housing
Mounting type
Flange with 2 holes Ø 4.5 mm
Shaft
Ø 3.175 mm (stainless steel)
3 lead wires (AWG 20)
Length: 300 mm
Output
Centering diameter
Ø 12 mm
Spring force
From 1.5 N to 7 N along stroke (typical)
DIMENSIONS in millimeters
2 x Ø 4.5
46
19
36
6.8
14
20.8
11.4
2.5
19
3 wires
300 mm
Tol. gen.: ± 0.5 mm
37 max.
10
4
Ø 3.175 0- 0.013
Ø 12
0
- 0.1
Fully extended
30
Wire
Revision: 25-Jul-12
YELLOW
GND (-)
RED
SIGNAL
GREEN
Vcc (+)
Document Number: 57115
171
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
Model 11 .............................. 173
Model 15 .............................. 174
Model 18 .............................. 175
Accessories
Model 21 .............................. 177
Model 21P ............................ 178
Model 23 .............................. 179
Model 25 .............................. 180
Model 26 .............................. 181
Model 28 .............................. 182
Dials
Model 11
www.vishay.com
Vishay Spectrol
25.4 mm Diameter Eleven Turn Dial
FEATURES
• Round vernier scale
• 1" diameter
•
1/
4"
or
1/
8"
RoHS
COMPLIANT
shaft adapter
• Black chrome finish with white markings
• Brushed chrome finish with black markings
QUICK REFERENCE DATA
• Satin chrome finish with black or white markings
Sensor type
Market appliance
Dimensions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIALS
Industrial
25.4 mm diamenter
MECHANICAL SPECIFICATIONS
OPERATONAL SPECIFICATIONS
PARAMETER
Dial to be free running and without binds, with
axis of drive sleeve perpendicular or in any
position within 0.004 per inch (0.10) out of
perpendicular with the mounting face
Directly to shaft with #2 - 56 spline socket set
screw. Drive sleeve set screw on lower side of
vertical center line with a graduated circular
dial reading of 0
0.075 heigth (1.90) x 0.013 width (0.33) of line
Runout
Mounting
Numeral Size
Graduation size:
Numeral
Intermediate
Width
Weight
Indication
Single counter type wheel and a
graduated circular dial registering a total
count of 11 turns
Operation
Single numeral in window (0 thru 10)
indicates completed number of turns of
the drive sleeve. Graduated circular dial
indicates the percent of the partial turn
of the drive sleeve
Transfer point
Between 97 and 0
Rotation
Increasing indication
Decreasing indication
0.040" L (1.02 cm)
0.030" L (0.76 cm)
0.010" (0.25 cm)
0.7 oz. max. (19.84 g)
CW direction
CCW direction
Zero blacklash between
dial and the drive sleeve
Accuracy
DIMENSIONS in inches (millimeters)
0.825 ± 0.010
(22.2 ± 0.25)
R 0.630 ± 0.015
(16.16 ± 0.04)
COUNTING DIAL
30° ± 5°
Ø 1.00 ± 0.015
(25.4 ± 0.04)
TURNING KNOB
DRIVE SLEEVE
50° ± 5°
MOUNTING FACE
0.015
0.125 (3.18) +- 0.000
0.063 (1.60)
+ 0.001
0.250 Ø (6.35) - 0.000
Ø 0.382
(9.70)
BREAK LEVER
GRADUATED DIAL
SET SCREW
BASE
0.625 ± 0.015 R
(15.9 ± 0.4)
0.225 R
(5.72)
Ø 0.515 ± 0.10
(13.1 ± 0.25)
Ø 0.250 + 0.001
(6.35 + 0.025)
± 0.040 (1.0)
0.175 ± 0.015
(4.45 ± 0.25)
+ 0.015
0.272 (6.91) - 0.000
+ 0.000
0.510 (12.95) - 0.015
0.750 ± 0.015 EXTENSION SHAFT POTS TO PANEL MOUNT:
(19.05 ± 0.4) MIN. 0.550 (14.0) MAX. 0.750 (19.05)
ORDERING INFORMATION/DESCRIPTION
11
A
11
BO10
e
MODEL
SHAFT DIAMETER
FINISH AND OTHER FEATURES
11. Satin chrome, black markings
21. Black chrome, white markings
31. Brushed chrome, black markings
41. Satin chrome, white markings
PACKAGING
LEAD FINISH
A 1/4" Shaft (standard)
B 1/8" Shaft adapter
Example: 11 - A - 11
SAP PART NUMBERING GUIDELINES
11
A
11
B10
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 04-Jul-12
Document Number: 57085
173
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 15
www.vishay.com
Vishay Spectrol
Rectangular 10 Turn Dial (3 Digit), (4 Digit) 100 Turn
FEATURES
•
•
•
•
•
•
•
QUICK REFERENCE DATA
Sensor type
Market appliance
OPERATIONAL SPECIFICATIONS
Operation 3 digit
(10 turn)
Left digit
Right two digits
DIALS
Industrial
Dimensions
25.4 mm x 49.5 mm
PARAMETER
Numerals
The numerals shall be white
on a black background and
0.130" H (3.30 cm)
Mounting
The spring detented knob shall be
removed using a straight pull, exposing
two no. 4 to 40 hex socket set screws
for mounting the dial directly to the
component shaft
Complete revolutions of turning knob
Percent of revolution
The unit registers a total count of 999
Operation 4 digit
(100 turn)
Left two digits
Right two digits
MECHANICAL SPECIFICATIONS
Weight
Rectangular digital scale
1" wide
1/ " or 1/ " or metric (6 mm) shaft adapter
4
8
Open or clear plastic window bezel
Black anodize finish with standard or white bezel trim
Satin clear anodize finish
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Complete revolutions of turning knob
Percent of revolution
The unit registers a total count of 9999
The indication shall increase with clockwise
rotation of the turning knob
Graduation lines adjacent to the numerals on
the right digit wheel indicate settings 0.2 % of
a revolution of the turning knob
Dial phased by rotating the exposed
component shaft to correspond with the
desired reading on the dial prior to tightening
the set screws
Rotation
Accuracy
Phasing
1.6 oz. (45.36 g)
DIMENSIONS in inches (millimeters)
0.812 MIN.
(20.62)
COVER
± 0.015
± 0.015
0.125 (3.18)
0.093 (2.36)
BASE
0.094
(2.39)
0.750
(19.05)
1.000
(25.40)
0.625
(15.88)
+ 0.000
- 0.015
WINDOW BEZEL
± 0.015
1.280 (32.51)
1.750
(44.45) 1.950 MAX.
TURNING KNOB
Ø 0.495 0.695 Ø (17.65)
(12.57)
0.250 Ø (6.35) - 0.00
0.128 Ø
(NO. 30 DRILL) (3.25)
± 0.002
0.750 (19.05)
(49.53)
+ 0.002
1
CL COMPONENT SHAFT HOLE
0.165 (4.19)
0.135 (3.42)
± 0.015
MOUNTING
HOLE PATTERN
SETSCREWS 2 PLCS
90° APART
BRAKE LEVER KNOB
ON
OFF
TRAVEL
5.95 (15.11)
1.000 MAX.
(25.40)
ORDERING INFORMATION/DESCRIPTION
15
MODEL
Example: 15 - A - 1 - 1
A
SHAFT DIAMETER
AND NUMERCIAL DISPLAY
A 1/4" dia. 3 digit
B 1/4" dia. 4 digit
C 1/8" dia. 3 digit
D 1/8" dia. 4 digit
E 6 mm dia. 3 digit
F 6 mm dia. 4 digit
1
1
B010
e
BEZEL
FINISH
PACKAGING
LEAD FINISH
1. Satin clear anodize
1. Open
3. Black anodize, white
3. Clear plastic window
bezel trim
5. Black anodize
SAP PART NUMBERING GUIDELINES
15
A
1
1
B10
MODEL
SHAFT DIAMETER
BEZEL
FINISH
PACKAGING
Revision: 04-Jul-12
Document Number: 57086
174
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 18
www.vishay.com
Vishay Spectrol
Model 18 (PR2)
22.2 mm Diameter, 15 Turn Dial
FEATURES
• No backlash
• Compact-requires minimal panel space (22.2 mm
diameter requirement)
• For use with precision potentiometers or other rotating
devices, up to 15 turns
• Designed for metal shaft
• High force “Click Brake”
• Black color on request
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
DIALS
Market appliance
Industrial
Dimensions
22.2 mm diameter
MECHANICAL SPECIFICATIONS
Accepts Shaft Diameter
6.35 mm (0.250")/6 mm/3.17 mm (0.125")/3 mm
Number of Turns
0 to 15
Dial Division
50 per turn
Torque with Brake Engaged
5 oz. - in (350 g - cm) min.
Markings
Black or satin chrome
Weight
15 g
Set Srew
UNC 2-56
Hex Key Size
1:27 MM (0.05")
Bushing Extension Beyond Panel
6.35 mm (0.250") max.
18.1 mm (0.710") min.
Shaft Extension Beyond Panel
22.2 mm (0.875") max.
DIMENSIONS in millimeters (inches)
0.880 (22.2)
0.575 (14.6)
MTG. FACE
0.375 (9.53)
Ø 0.875 (22.2)
0.025 (0.65)
MOD 1
8
80 70
30 20
0 9
0
60
50 4
0
SCREW 2 - 56 UNC
HEX 0.05
Ø 0.250 + 0.001
(6.35 + 0.025)
VISHAY
10
Ø 0.40 DEEP 0.30 (Ø 10.1 PROF 7.6)
Ø 0.65 DEEP 0.125 (16.5 PROF 3.2)
SPACER
ANTIROTATION
BLACK PLACTIC
0.05 (1.3)
Revision: 06-Aug-12
Document Number: 57078
175
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 18
www.vishay.com
Vishay Spectrol
ORDERING INFORMATION/DESCRIPTION
18
A
11
B010
e
MODEL
SHAFT DIAMENTER
ACCOMODATION AND FIXINGS
FINISH
PACKAGING
LEAD
FINISH
A 1/4" dia. shaft - 1 set screw
B 6 mm metric bore - 1 set screw
C 1/8" dia. shaft - 1 set screw
D 3 mm metric bore - 1 set screw
11 Satin chrome, black markings (standard)
21 Black chrome, white markings
41 Satin chrome, white markings
Example: 18 - A - 11
SAP PART NUMBERING GUIDELINES
18
A
11
B10
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 06-Aug-12
Document Number: 57078
176
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 21
www.vishay.com
Vishay Spectrol
46.02 mm Diameter 15 Turn Dial
FEATURES
• Round vernier scale
• 1 13/16" dia.
• 1/4" or 1/8" or 6 mm metric bore shaft adapter
• Satin chrome finish with black markings
• Black chrome finish with white markings
• Brushed chrome finish with black markings
QUICK REFERENCE DATA
Sensor type
Market appliance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIALS
Industrial
Dimensions
46 mm dia.
MECHANICAL SPECIFICATIONS
OPERATIONAL SPECIFICATIONS
PARAMETER
1499 turns total
The number in window (0 thru 14)
Readout and operation indicates completed number of turns of
the drive sleeve. Graduated circular dial
indicates the percent of the partial
turn of the drive sleeve
Direct to shaft with # 4 to 40
hex socket set screw located
adjacent to no. 75 on graduated dial
Mounting
Numeral size:
Counter wheel:
Graduated dial:
0.90" H x 0.013" W (2.29 cm x 0.33 cm)
0.109" x 0.018" (2.77 cm x 0.46 cm)
Graduation size:
Numeral and every
Fifth
Intermediate
Width
Transfer point
The number in center of window shall
change as graduated dial rotates
between 94 and 0
Rotation
Readout shall increase with clockwise
and decrease with counterclockwise
rotation
Accuracy
Zero blacklash between graduated dial
and the drive sleeve
0.55" L (1.40 cm)
0.035" L (0.89 cm)
0.012" (0.30 cm)
Weight
3.0 max. (85.05)
DIMENSIONS in inches (millimeters)
MOUNTING FACE
DRIVE SLEEVE
COUNTING DIAL
BRAKE LEVER
1.094 R MAX.
(27.79)
± 0.015
1.000
(25.40)
22°
± 5°
± 5°
46°
TURNING KNOB
0.562
(14.27)
0.094
(2.39)
0.125
(3.18)
± 0.000
- 0.015
± 0.001
0.046
(1.17)
0.128
(3.25)
± 0.001
0.250 - 0.000
Ø
(6.35)
± 0.005
0.390 - 0.000
Ø
(9.91)
SET SCREW*
0.268
(6.81)
Ø 1.812 P
(46.02)
± 0.015
BASE
GRADUATED DIAL
± 0.015
0.578 - 0.000
(14.68)
*SET SCREW LOCATION AT
NO 75 ON DIAL FACE
± 0.031
0.922
(23.42)
ORDERING INFORMATION/DESCRIPTION
21
A
11
B010
e
MODEL
SHAFT DIAMETER AND ACCOMODATION
FINISH AND OTHER FEATURES
PACKAGING
LEAD FINISH
A 1/4" shaft (standard)
B 6 mm metric bore shaft adapter
C 1/8" Shaft adapter
11. Satin chrome, black markings
21. Black chrome, white markings
31. Brushed chrome, black markings
Example: 21 - A - 11
SAP PART NUMBERING GUIDELINES
21
A
11
B10
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 05-Jul-12
Document Number: 57088
177
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MODEL 21P
www.vishay.com
Vishay Spectrol
46.0 mm Diameter Eleven Turn Dial
FEATURES
• Round vernier scale
• 1 13/16" dia. (46.0 mm)
• Material: plastic ABS mold
• Finish: metallized clear (aluminum)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Market appliance
Dimensions
DIALS
Industrial
46 mm dia.
MECHANICAL SPECIFICATIONS
Direct to shaft with # 4 to 40 unc hext socket set screw located adjacent to no. 75 on graduated
dial
Mounting
Numeral size:
Counter wheel
Graduated dial
Graduation size:
Numeral and every fifth
Intermediate
Width
Weight
1/ " x 1/ " (2.0 mm x 1.6 mm)
12
16
1/ " x 1/ " (3.2 mm x 2.0 mm)
8
12
1/ "
12
1/ "
24
(2.0 mm)
(1.0 mm)
0.01" (0.2 mm)
13 g
OPERATIONAL SPECIFICATIONS
1099 turns total. The number in window (0 thru 10) indicates completed number of turn of the drive
sleeve. Graduated circular dial indicates the percent of the partial turn of the drive sleeve
The number in center of window shall change as graduated dial rotates between 98 and 0
Readout shall increase with CW and decrease with CCW rotation
Zero backlash between graduated dial and drive sleeve
Readout and operation
Transfer point
Rotation
Accuracy
DIMENSIONS in millimeters (inches)
PANEL
POTENTIOMETER
10 TURN MAX.
0.625"
(15.9 mm)
0.96"
(24.6 mm)
NUT
DRILL 0.125 ON RADIUS 0.5625
(3.175 mm)
(14.3 mm)
ORDERING INFORMATION/DESCRIPTION
21P
A
11
BO10
e
MODEL
SHAFT DIAMETER AND ACCOMODATION
FINISH
PACKAGING
LEAD FINISH
A 1/4" shaft (standard)
B 6 mm shaft
Metallized clear (aluminium)
Example: 21P - A - 11
SAP PART NUMBERING GUIDELINES
21P
A
11
B10
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 10-Jul-12
Document Number: 57017
178
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 23
www.vishay.com
Vishay Spectrol
Multidial 10 Turns 30.6 mm Diameter Projecting Design
FEATURES
• Black body, satin face with chrome ring
• White three digit markings on black background
• Additional graduations for fine adjustment
• Protective window
• Locking lever for fixed position
• Suitable for 6.35 mm shafts
• Supplied with locking key and mounting instructions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
23-1-21 Projecting
L. 31.5 mm
QUICK REFERENCE DATA
Sensor type
DIALS
Market appliance
Dimensions
Professional
30.6 mm diameter
DIMENSIONS in inches (millimeters)
DIA.
PANEL
CUT OUT
9.6 DIA.
10
DIAL MECHANISM
ANTI-ROTATION
WASHER
PANEL
ORDERING INFORMATION/DESCRIPTION
23
A
MODEL
1/ "
4
SHAFT
21
B050
e
BLACK BODY
PACKAGING
LEAD FINISH
Satin face with
chrome ring
SAP PART NUMBERING GUIDELINES
23
A
21
B50
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 06-Aug-12
Document Number: 57083
179
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 25
www.vishay.com
Vishay Spectrol
Model 25 (PR1)
46 mm Diameter, 20 Turn Dial
FEATURES
• Large package size
• For use with precision potentiometers or other
devices, up to 20 turns
RoHS
COMPLIANT
• Excellent readability
• Precision feel - no backlash
• Cast housing
QUICK REFERENCE DATA
Sensor type
Market appliance
Dimensions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIALS
Industrial
46 mm diameter
MECHANICAL SPECIFICATIONS
Accepts Shaft Diameter
Number of Turns
Dial Division
Torque with Brake Engaged
Markings
Weight
Set Srew
Hex Key Size
Bushing Extension Beyond Panel
6.35 mm (0.250")/6 mm/3.17 (0.125")/3 mm
0 to 20
100 per turn
5 oz. - in (350 g - cm) min.
Black on satin chrome
75 g
UNC 4-40
1.27 mm (0.05")
6.35 mm (0.250") max.
18.1 mm (0.710") min.
22.5 mm (0.925") max.
Shaft Extension Beyond Panel
DIMENSIONS in millimeters (inches)
Ø 10.36 mm
(0.41")
Ø 14.30 mm
(0.562")
Ø 3.17 mm
(0.125")
Using the existing Antirotation Lug
EASY REMOVABLE WITH PLIERS
1. Drill 3.2 mm (0.125) diameter antirotation pin hole on vertical
centerline 14.3 mm (0.562) below center of potentiometer
mounting hole.
2. Mount potentiometer shaft counterclockwise to obtain minimum
resistance or voltage ratio. This is not necessarily identical with the
mechanical stop.
4. Loosen set screws in knob of dial. Set dial. Set dial to “0.0” reading.
5. While holding outer ring of dial, position unit lightly against panel.
Tighten knob set screws to potentiometer shaft.
Using the Antirotation Device
1. Remove antirotation lug from dial by using pliers.
2. Mount potentiometer in panel with antirotation device nut
(supplied with dial) and lockwasher (supplied with potentiometer).
3. Turn potentiometer shaft counterclockwise to obtain minimum
resistance or voltage ratio. This is not necessaryly identical with
the mechanical stop.
4. Loosen screws in knob of dial. Set dial to “0.0” reading.
5. While holding outer ring of dial, position unit lightly against panel.
Tighten knob set screws to potentiometer shaft.
PANEL HOLE PATTERN
ORDERING INFORMATION/DESCRIPTION
25
A
11
B010
e
MODEL
SHAFT DIAMETER
ACCOMMODATION AND FIXINGS
FINISH
PACKAGING
LEAD FINISH
Example: 25 - A - 11
A 1/4" dia. shaft - 1set screw
B 6 mm metric bore - 1 set screw
C 1/8" dia. shaft -1 set screw
D 3 mm metric bore - 1 set screw
11 Satin chrome, black markings (standard)
21 Black chrome, white markings
41 Satin chrome, white markings
SAP PART NUMBERING GUIDELINES
25
A
11
B10
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 06-Aug-12
Document Number: 57079
180
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 26
www.vishay.com
Vishay Spectrol
Multidial 10 Turns 30.6 mm Diameter
Recessed Design
FEATURES
• Black body, satin face with chrome ring
• White three digit markings on black background
• Additional graduations for fine adjustment
• Protective window
• Locking lever for fixed position
• Suitable for 6.35 mm shafts
• Supplied with locking key and mounting instructions
26-1-21 Recessed
L. 15 mm (from panel)
L. 31.5 mm (total)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
Market appliance
Dimensions
DIALS
Professional
30.6 mm diameter
DIMENSIONS in inches (millimeters)
6
19 MAX.
11 MIN.
6
3
2
4
5
1
02
3
ORDERING INFORMATION/DESCRIPTION
26
A
MODEL
1/ "
4
SHAFT
21
B050
e
BLACK BODY
PACKAGING
LEAD FINISH
Satin face with
chrome ring
SAP PART NUMBERING GUIDELINES
26
A
21
B50
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 07-Aug-12
Document Number: 57084
181
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 28
www.vishay.com
Vishay Spectrol
28 mm Diameter Twenty-One Turn Dial
FEATURES
• Laser machined markings (e.g. logo) per
customer design
RoHS
• Shaft bore variations available
COMPLIANT
• Special mounting spacers
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL SPECIFICATIONS
QUICK REFERENCE DATA
Sensor type
Market appliance
PARAMETER
DIALS
Industrial
Dimensions
28 mm diameter
TECHNICAL SPECIFICATIONS
Readout and operation
21 turns total
The number in the window (0 thru 20)
indicates the percent of a partial turn
of the drive sleeve
- 20 °C to + 50 °C
Operating torque
0.75 oz. - in max.
Weight
23 g
Housing
Metal housing treated
against corrosion
Finish
Aluminum anodized
Precision ball bearing for
uniform movement
Bearing
Metal brake operates a
high torque system which actuates
brake
Brake lever
Temperature range
MARKING
Manufacturer’s name
and model number
Unit identification
DIMENSIONS in millimeters (inches)
MAX. 24.3 mm
MIN. 16.5 mm
PANEL
BLACK ANODISED ROTOR
25.4 mm. (1.0")
Ø 6.35 mm
(0.250")
Ø MAX.
16.0 mm
POTS
Ø 28.0 mm
(1.10")
MAX. 6.75 mm
MOUNTING SPACER
ANODISED ALUMINUM FINISH
ORDERING INFORMATION/DESCRIPTION
28
MODEL
A
11
SHAFT DIAMETER
FINISH
A 1/4" dia. shaft - 1 set screw
B 6 mm metric bore - 1 set screw
C 1/8" dia. shaft - 1 set screw
11. Clear satin anodized housing,
black rotor, white markings
21. Black anodized housing,
black rotor, white markings
BO8
e
PACKAGING
LEAD
FINISH
Example: 28 - A - 11
SAP PART NUMBERING GUIDELINES
28
A
11
B08
MODEL
SHAFT DIAMETER
FINISH
PACKAGING
Revision: 10-Jul-12
Document Number: 57082
182
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VARIABLE RESISTORS
Vishay Intertechnology, Inc.
Vishay
VSE-DB0100-1310
VARIABLE RESISTORS
Vishay
VISHAY PRODUCTS
SEMICONDUCTORS:
Rectifiers • High-Power Diodes and Thyristors • Small-Signal Diodes • Zener and Suppressor Diodes •
FETs • Optoelectronics • ICs • Modules
PASSIVE COMPONENTS:
Resistive Products • Magnetics • Capacitors
Vishay Intertechnology, Inc. | 63 Lancaster Avenue Malvern, PA 19355-2143 | USA
Visit www.vishay.com for product information or select below for a current list of sales offices, representatives,
and distributors.
W O R L D W I D E S A L E S C O N TA C T S
Vishay Intertechnology, Inc.
WORLD HEADQUARTERS
THE AMERICAS
EUROPE
UNITED STATES
GERMANY
VISHAY AMERICAS
ONE GREENWICH PLACE
SHELTON, CT 06484
UNITED STATES
PH: +1-402-563-6866
FAX: +1-402-563-6296
VISHAY ELECTRONIC GMBH
DR.-FELIX-ZANDMAN-PLATZ 1
95100 SELB
GERMANY
PH: +49-9287-71-0
FAX: +49-9287-70435
ASIA
FRANCE
SINGAPORE
VISHAY INTERTECHNOLOGY ASIA PTE LTD.
37A TAMPINES STREET 92 #07-00
SINGAPORE 528886
PH: +65-6788-6668
FAX: +65-6788-0988
VISHAY S.A.
199, BLVD DE LA MADELEINE
06003 NICE, CEDEX 1
FRANCE
PH: +33-4-9337-2727
FAX: +33-4-9337-2726
P.R. CHINA
UNITED KINGDOM
VISHAY CHINA CO., LTD.
15D, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
SHANGHAI 200030
P.R. CHINA
PH: +86-21-5258 5000
FAX: +86-21-5258 7979
VISHAY LTD.
SUITE 6C, TOWER HOUSE
ST. CATHERINE’S COURT
SUNDERLAND ENTERPRISE PARK
SUNDERLAND SR5 3XJ
UNITED KINGDOM
PH: +44-191-516-8584
FAX: +44-191-549-9556
JAPAN
VISHAY JAPAN CO., LTD.
SHIBUYA PRESTIGE BLDG. 4F
3-12-22, SHIBUYA
SHIBUYA-KU
TOKYO 150-0002
JAPAN
PH: +81-3-5466-7150
FAX: +81-3-5466-7160
© Copyright 2013 Vishay Intertechnology, Inc.
® Registered trademarks of Vishay Intertechnology, Inc.
All rights reserved. Printed in Germany. Specifications subject to change without notice.
VSE-DB0100-1310
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000