Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC3G06
CMOS IC
TRIPLE INVERTER WITH
OPEN-DRAIN OUTPUTS

DESCRIPTION
The U74LVC3G06 is triple inverter with open-drain outputs. The
output can be connected to other open-drain outputs to implement
active-low wired-OR or active-high wired-AND functions.
This device is fully specified for partial-power-down applications
using Ioff. The Ioff circuitry disables the outputs, preventing damaging
current backflow through the device when it is powered down.

SOP-8
FEATURES
* Wide supply voltage range from 1.65V to 5.5V
* Inputs accept voltages up to 5.5V
* IOFF supports partial-power-down mode
* Low static power consumption; ICC=10μA (Max.)

ORDERING INFORMATION
Ordering Number
U74LVC3G06G-S08-R

Package
SOP-8
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2016 Unisonic Technologies Co., Ltd
1 of 5
QW-R126-039.A
U74LVC3G06

PIN CONFIGURATION

FUNCTION TABLE
INPUT(A)
L
H
Note: H: High Voltage Level
L: Low Voltage Level
Z: High-Impedance OFF-State

CMOS IC
OUTPUT(Y)
Z
L
LOGIC DIAGRAM (positive logic)
Logic symbol
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
IEC logic symbol
2 of 5
QW-R126-039.A
U74LVC3G06

CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
Supply Voltage
Input Voltage
Output Voltage
SYMBOL
VCC
VIN
VOUT
CONDITIONS
RATINGS
-0.5 ~ +6.5
-0.5 ~ +6.5
-0.5 ~ +6.5
-0.5 ~ +6.5
Output in the high or low state
Output in the power-off state
UNIT
V
V
V
V
Continuous VCC or GND
ICC
±100
mA
Current
Continuous Output Current
IOUT
VOUT=0V ~ VCC
±50
mA
Input Clamp Current
IIK
VIN<0V
-50
mA
Output Clamp Current
IOK
VOUT>VCC or VOUT<0V
-50
mA
Storage Temperature Range
TSTG
-65 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
Supply Voltage
VCC
Input Voltage
Output Voltage
Operating Temperature
(Note)
VIN
VOUT
TEST CONDITIONS
Operating
Data retention only
High or low state
MIN
1.65
1.5
0
0
TYP
-40
TA
VCC=1.8V±0.15V, 2.5V±0.2V
VCC=3.3V±0.3V
VCC=5V±0.5V
Note: This condition is only determined from design. It can't be 100% tested in mass production.
Input Transition Rise or Fall
Rate

∆t/∆v
MAX
5.5
5.5
5.5
UNIT
V
V
V
V
125
°C
20
10
5
ns/V
ns/V
ns/V
MAX
0.35×VCC
0.7
0.8
0.3×VCC
0.1
0.45
0.3
0.4
0.55
0.55
±5
±10
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
μA
μA
±10
μA
10
μA
500
μA
ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
High-level Input Voltage
SYMBOL
VIH
Low-level Input Voltage
VIL
Low-Level Output Voltage
VOL
Input Leakage Current
Power OFF Leakage Current
3-state Output OFF-state
Current
Quiescent Supply Current
Additional Quiescent Supply
Current Per Input Pin
Input Capacitance
II(LEAK)
Ioff
IOZ
ICC
∆ICC
CI
TEST CONDITIONS
MIN
VCC=1.8±0.15V
0.65×VCC
VCC=2.5±0.2V
1.7
VCC=3.3±0.3V
2
0.7×VCC
VCC=5±0.5V
VCC=1.8±0.15V
VCC=2.5±0.2V
VCC=3.3±0.3V
VCC=5±0.5V
VCC=1.65 ~ 5.5V, IOH=100μA
VCC=1.65V, IOH=4mA
VCC=2.3V, IOH=8mA
IOH=16mA
VCC=3.0V
IOH=24mA
VCC=4.5V, IOH=32mA
VCC=0 ~ 5.5V, VIN=5.5V or GND
VCC=0V, VIN or VOUT=5.5V
VIN=VIH or VIL, VOUT=VCC or GND,
VCC =5.5V
VCC=1.65 ~ 5.5V,
VIN=VCC or GND, IOUT=0A
VCC=3 ~ 5.5V, One input at
VCC-0.6V, Other inputs at VCC or
GND
VCC=3.3V, VIN=VCC or GND
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP
3.5
pF
3 of 5
QW-R126-039.A
U74LVC3G06

SWITCHING CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
Propagation delay from
input (A) to output(Y)

CMOS IC
SYMBOL
tPZL / tPLZ
TEST CONDITIONS
VCC=1.8±0.15V,CL=30pF, RL=1kΩ
VCC=2.5±0.2V,CL=30pF, RL=500Ω
VCC=3.3±0.3V,CL=50pF, RL=500Ω
VCC=5±0.5V,CL=50pF, RL=500Ω
MIN
1.8
1.0
1.0
1.0
TYP
MAX
7.2
3.9
3.4
2.9
UNIT
ns
ns
ns
ns
MAX
UNIT
pF
pF
pF
pF
OPERATING CHARACTERISTICS (f=10MHz, TA =25°C , unless otherwise specified)
PARAMETER
Power Dissipation
Capacitance
SYMBOL
CPD
TEST CONDITIONS
VCC=1.8V
VCC=2.5V
VCC=3.3V
VCC=5V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
2
2
3
4
4 of 5
QW-R126-039.A
U74LVC3G06

CMOS IC
TEST CIRCUIT AND WAVEFORMS
Note: CL includes probe and jig capacitance.
Inputs
VCC
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VIN
VCC
VCC
3V
VCC
tR, tF
≤2ns
≤2ns
≤2.5ns
≤2.5ns
VM
VLOAD
CL
RL
V∆
VCC/2
VCC/2
1.5V
VCC/2
2 x VCC
2 x VCC
6V
2 x VCC
30pF
30pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
0.15V
0.15V
0.3V
0.3V
VIN
Input
VM
VM
0V
t PZL
tPLZ
VLOAD /2
Output
VM
VOL +∆V
VOL
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R126-039.A