UNISONIC TECHNOLOGIES CO., LTD U74LVC09A CMOS IC QUAD 2-INPUT NAND GATE WITH OPEN-DRAIN OUTPUT DESCRIPTION The U74LVC09A provides four 2-input NAND functions.The outputs are open-drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Inputs can be driven from either 3.3V or 5.5V devices.This feature allows the use of these devices as translators in mixed 3.3V and 5V applications. FEATURES * Operate From 1.65V to 5.5V * Input Accept Voltages to 5.0V * Partial-Power-Down Mode Operation * Max tpd is 3.6ns at 3.3V ORDERING INFORMATION Ordering Number U74LVC09AG-S16-R Package SOP-16 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 5 QW-R126-043 .A U74LVC09A PIN CONFIGURATION 1A 1 14 VCC 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y FUNCTION TABLE (each gate) INPUT(nA) L L H H H = High voltage level L = Low voltage level Z = High-impedance OFF-state CMOS IC INPUT(nB) L H L H OUTPUT(nY) Z Z Z L LOGIC DIAGRAM (Positive Logic) Logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw IEC logic symbol 2 of 5 QW-R126-043 .A U74LVC09A CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER Supply Voltage Input Voltage Output Voltage SYMBOL VCC VIN VOUT CONDITIONS RATINGS -0.5 ~ +6.5 -0.5 ~ +6.5 -0.5 ~ VCC +0.5 -0.5 ~ +6.5 Output in the high or low state Output in the power-off state UNIT V V V V Continuous VCC or GND ICC -50 mA Current Continuous Output Current IOUT VOUT=0V ~ VCC ±50 mA Input Clamp Current IIK VIN<0V 50 mA Output Clamp Current IOK VOUT>VCC or VOUT<0V ±100 mA Storage Temperature Range TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage VIN Output Voltage Operating Temperature (Note) Input Transition Rise or Fall Rate VOUT TEST CONDITIONS Operating Data retention only High or low state 3-state MIN 1.65 1.2 0 0 0 TYP 5.5 VCC 5.5 UNIT V V V V V 125 °C 20 10 ns/V ns/V MAX 0.35×VCC 0.7 0.8 0.3×VCC 0.2 0.45 0.6 0.4 0.55 0.55 UNIT V V V V V V V V V V V V V V ±0.1 ±5 μA ±0.1 ±10 uA 0.1 ±5 μA 0.1 10 μA 5 500 μA -40 TA VCC=1.65V ~ 2.7V 0 VCC=2.7V ~ 3.6V 0 Note: This condition is only determined from design. It can't be 100% tested in mass production. ∆t/∆v MAX 5.5 ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-level Input Voltage SYMBOL VIH Low-level Input Voltage VIL Low-Level Output Voltage VOL Input Leakage Current Power OFF Leakage Current Input Leakage Current (For I/O Ports) Quiescent Supply Current Additional Quiescent Supply Current Per Input Pin Input Capacitance II(LEAK) Ioff IOZ ICC ∆ICC CI TEST CONDITIONS MIN VCC=1.8V±0.15V 0.65×VCC VCC=2.5V±0.2V 1.7 VCC=3.3V±0.3V 2 VCC=5.0V±0.5V 0.7×VCC VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=5.0V±0.5V VCC=1.65V ~ 5.5V, IOH=100μA VCC=1.65V, IOH=4mA VCC=2.3V, IOH=8mA VCC=2.7V, IOH=12mA VCC=3.0V, IOH=24mA VCC=4.5V, IOH=32mA VCC=1.65V ~ 5.5V, VIN=5.5V or GND VCC=0V, VIN or VOUT=5.5V VCC=1.65V ~ 5.5V, VIN = VIH, VOUT=GND to 5.5V VCC=5.5V, VIN=5.5V or GND, IOUT=0A VCC=2.7V~5.5V, Per input pin, VI=VCC-0.6V, IO=0A VCC=0V to 5.5V, VIN=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 4.0 pF 3 of 5 QW-R126-043 .A U74LVC09A SWITCHING CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER Propagation delay from input (nA or nB) to output(Y) Propagation delay from input (nA or nB) to output(Y) Output skew time CMOS IC SYMBOL tPZL tPLZ TEST CONDITIONS VCC=1.8V±0.15V, CL=30pF, RL=1KΩ VCC=2.5V±0.2V, CL=30pF, RL=500Ω VCC=2.7V, CL=50pF, RL=500Ω VCC=3.3V±0.3V, CL=50pF, RL=500Ω VCC=1.8V±0.15V, CL=30pF, RL=1KΩ VCC=2.5V±0.2V, CL=30pF, RL=500Ω VCC=2.7V, CL=50pF, RL=500Ω VCC=3.3V±0.3V, CL=50pF, RL=500Ω MIN TYP MAX UNIT 1.0 2.6 6.0 ns 0.5 1.8 3.3 ns 0.5 1.7 2.9 ns 0.5 1.8 3.0 ns 1.0 2.7 6.0 ns 0.5 1.5 3.3 ns 1.0 2.6 3.8 ns 1.0 2.3 3.6 ns 1.0 ns MAX UNIT pF pF pF tsw OPERATING CHARACTERISTICS (Per gate, VIN=GND or VCC, f=10MHz , TA =25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS VCC=1.8V±0.15V, CL=30pF Power Dissipation CPD VCC=2.5V±0.2V, CL=30pF Capacitance VCC=3.3V±0.3V, CL=50pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 6.2 9.7 12.9 4 of 5 QW-R126-043 .A U74LVC09A CMOS IC TEST CIRCUIT AND WAVEFORMS INPUTS VCC 1.8V±0.15V 2.5V±0.2V 2.7V 3.3V±0.3V VIN VCC VCC 2.7V 2.7V tR/tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM V△ CL RL VCC/2 VCC/2 1.5V 1.5V 0.15V 0.15V 0.3V 0.3V 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω Notes: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R126-043 .A