Model 657 www.vishay.com Vishay Spectrol Industrial Rotary Position Sensor Bushing Mount Type, Conductive Plastic FEATURES • Fully sealed for high immunity to environmental damage • Excellent temperature stability • Rotational life exceeds 2 million revolutions • Low cost and wide range of options • Stainless steel shaft • Shock to 30 g vibration to 15 g at 10 Hz to 2000 Hz QUICK REFERENCE DATA Sensor type Output type Market appliance Dimensions ROTATIONAL, conductive plastic Output by turrets Industrial 15.81 mm x 17.46 mm ELECTRICAL SPECIFICATIONS PARAMETER Standard resistance 1 k to 100 k Capability range 200 k Resistance tolerance ± 20 % Linearity ±2% Power rating 1.0 W at 85 °C Electrical travel 240° ± 4° Dielectric withstanding 500 VRMS at 60 Hz minimum Output smoothness 0.2 % maximum MECHANICAL SPECIFICATIONS PARAMETER Bearing type Sleeve Mechanical rotation 250° ± 2° Stop strength 10 in - lb minimum, 11.5 kg/cm Starting torque 3.0 o.z - in maximum, 216 g/cm Running torque 3.0 oz. - in maximum, 216 g/cm ORDERING INFORMATION/DESCRIPTION 657 MODEL B STYLE B: Bushing F SHAFT OPTIONS R - Round F - Flatted 0 50 k B10 SHAFT BUSHING OPTIONS TOTAL RESISTANCE PACKAGING A B C Shaft length 0 - 0.875" FMS 1 - 0.625" FMS 2 - 1.000" FMS 3 - 1.250" FMS Bushing length 0.375" FMS 0.250" FMS 0.500" FMS 0.750" FMS Flat 0.440" 0.315" 0.440" 0.440" Box of 10 pieces SAP PART NUMBERING GUIDELINES 657B MODEL Revision: 27-Mar-15 R 1 103 BO10 END SHAFT SHAFT AND BUSHING OPTIONS OHMIC VALUE PACKAGING R: Round (see above) Document Number: 57077 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Model 657 www.vishay.com Vishay Spectrol DIMENSIONS in inches (millimeters) + 0.000 - 0.051 MODEL: 657B/657-... Ø 0.375 ± 0.002 x 0.030 MAX. WIDE PILOT (9.53 x 0.76 MAX. WIDE PILOT) 0.500 (12.70) 3/ A 8 - 32 UNEF - 2A 0.625 (15.81) + 0.0000 - 0.0003 ± 0.031 Ø 0.2497 (6.34 - 0.01) 0.042 0.688 (17.46) 0.375 (9.53) 0.030 MAX. (0.76) 0.093 (2.36) 0.014 (0.36) 0.143 (3.64) 0.151 (3.84) 0.031 (0.79) 0.035 x 0.075 (0.89 x 1.91) MINIMUM WIRE OPENING 0.428 (10.87) 2 ± 0.015 B CW 3 1 DECIMALS: XX ± 0.01 INCHES (± 0.25 mm) XX ± 0.005 INCHES (± 0.13 mm) ANGLES: ± 2° SCHEMATIC SHAFT FLAT AND PHASING DIAGRAM 0.216 (5.49) ± 0.015 90° C SPECTROL 657-X-X-XXX XXXX MEX ± 5° 321 WITH SHAFT FLAT POSITIONED AS SHOWN, OUTPUT RATIO TO BE e/E = 0.50 ± 0.02 STANDARD RESISTANCE VALUES CODE 102 202 502 103 203 503 104 RESISTANCE () 1K 2K 5K 10K 20K 50K 100K MATERIAL SPECIFICATIONS Shaft Bushing Housing Stainless steel Nickel plated brass Thermoplastic Element Conductive plastic on alumina substrate Revision: 27-Mar-15 ENVIRONMENTAL SPECIFICATIONS Rotational life Vibration Operating temperature Storage temperature Temperature coefficient Shock Resistant to solder heat Moisture resistance IP rating 2 million revolutions 15 g at 10 Hz to 2000 Hz -40 °C to +125 °C -55 °C to +150 °C ± 600 ppm/°C 30 g 350 °C for 5 s Sealed construction IP67* application to provide protection for wiring terminals Note • Nothing stated herein shall be construed as a guarantee of quality or durability. MARKING Unit identification Vishay Spectrol, part number, data code, country of origin and terminal designation. Example of a marking for a standard part: 657-2-0-102 Document Number: 57077 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000