V ishay I nt e rt e chn o l o g y, I nc . I INNOVAT AND TEC O L OGY P16S, PA16S N HN POTENTIOMETERS O 19 62-2012 Resistors - Low profile and small size Knob Panel Potentiometers with Switch Key Benefits • • • • • • • • • Low profile: 7 mm bushing length (15 mm inside equipment) Small size: 16 mm knob diameter Pot in the knob CCW electrical cut-off incorporated Indent feeling Metal knob available High dielectric strength 2.5 kVRMS IP67 sealing Cermet and conductive plastic element available END PRODUCTS • • • • Portable equipment Communication headsets Night vision goggles Cockpit panel controls Resources • Datasheet: P16S, PA16S - http://www.vishay.com/doc?51063 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0316-1205 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 (conductive plastic) 0.5 W at 40 °C V ishay Compact (integrated) I nt e rt e chn o l o g y, I nc . P16S, PA16S AND TEC I INNOVAT Metallic or plastic knob options N Custom knob on request O L OGY Fully sealed and panel sealed POTENTIOMETERS The P16S is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back side of the panel reducing to a minimum the required clearance. O HN Detent and electric cut off at beginning of travel 19 Test according to CECC 41000 or IEC 60393-1 62-2012 Material categorization: For definitions of compliance Knob Panel Potentiometers with Switch please see www.vishay.com/doc?99912 DIMENSIONS in millimeters (± 0.5 mm) P16SNP P16SNM Thickness nut 2 mm washer 1.5 mm Panel sealing ring 12 wrench 10.2 9.4 Panel sealing ring 12 wrench Thread M10 x 0.75 9.6 8.8 Thread M10 x 0.75 + 0.1 8.1 + 0 7.2 13.5 ± 1 15.5 ± 1 b 3 terminals 7.2 13.5 ± 1 15.5 ± 1 Reference mark 1.8 ø 10 + 0.1 +0 0.3 Panel thickness max.: 3 mm P16S, PA16S 30 c 8 a Knob Potentiometer with Switch Ø 16 Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical Travel 300° ± 5° Operating Torque 2 Ncm typical Document Number : 51063 For technical questions, contact: [email protected] www.vishay.com 25 Ncm maximum See also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 1 Max. Tightening Torque of Mounting Nut Ncm maximum This document is subject to change without250 notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End Stop Torque Revision: 17-Apr-12 Unit Weight 4.5 g typical ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Metallic Knob Plastic Knob - 40 °C to 125 °C - 40 °C to 85 °C 40/100/56 40/85/56 Sealing Sealed container and panel sealed Protection Grades IP67 SWITCH ELECTRICAL AND MECHANICAL SPECIFICATIONS ON/OFF Switch Actuation in counter clockwise position (between terminal a and terminal b) P16S Switching Current Revision: 17-Apr-12 Resistors - Low profile and small size Thickness nut 2 mm washer 1.5 mm PANEL CUTOUT 100 mA max. PA16S 1 mA max. Switch Actuation Torque 4 Ncm min. Switch Actuation Travel 30° ± 5° Dielectric Strength Terminal to Terminal (RMS) 1000 V Insulation Resistance between Contacts 106 M Switch Mechanical Endurance 10 000 cycles 1 Cycle ON-OFF-ON MARKING CONTROL KNOB Ohmic value code, tolerance, code and taper Black metallic knob (NM). Black plastic knob (NP). For white and blue color see ordering information. Other dimensions, shapes, colors of control knobs are manufactured on request - please consult Vishay. Other reference marks (shapes, colors) and legends can be VMN-PT0316-1205 printed on plastic knob on request - please consult Vishay. Manufacturing date code PACKAGING Carton box of 20 pieces PRODUCT SHEET 2/2 P16S STANDARD RESISTANCE ELEMENT PA16S STANDARD RESISTANCE ELEMENT This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT AREDATA SUBJECT TO LINEAR LOG. TAPER LINEAR TAPER LOG. TAPER STANSPECIFIC STANDISCLAIMERS, SET TAPER FORTH AT www.vishay.com/doc?91000 DARD RESIS- MAX. POWER MAX. MAX. CUR. MAX. POWER MAX. MAX. CUR. DARD RESIS- MAX. POWER MAX. MAX. CUR. MAX. POWER MAX. MAX. CUR.