For more information, please visit the product page. date 04/01/2013 page 1 of 4 SERIES: VHB200W │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • up to 200 W isolated output industry standard half brick package 4:1 input range (10~36 V, 18~75 V) single output from 3.3~48 V 1,500 V isolation over current, over temperature, over voltage, and short circuit protections • remote on/off • efficiency up to 89% RoHS MODEL input voltage output voltage output current output power ripple and noise1 efficiency range (Vdc) (Vdc) max (A) max (W) max (mVp-p) typ (%) VHB200W-Q24-S3R3 10 ~ 36 3.3 50 165 100 87 VHB200W-Q24-S5 10 ~ 36 5 40 200 100 87 VHB200W-Q24-S12 10 ~ 36 12 16.7 200 150 86 VHB200W-Q24-S15 10 ~ 36 15 13.3 200 150 86 VHB200W-Q24-S24 10 ~ 36 24 8.3 200 240 87 VHB200W-Q24-S28 10 ~ 36 28 7.1 200 280 87 VHB200W-Q24-S48 10 ~ 36 48 4.2 200 240 86 VHB200W-Q48-S3R3 18 ~ 75 3.3 40 132 100 88 VHB200W-Q48-S5 18 ~ 75 5 40 200 100 89 VHB200W-Q48-S12 18 ~ 75 12 16.7 200 150 88 VHB200W-Q48-S15 18 ~ 75 15 13.3 200 150 88 VHB200W-Q48-S24 18 ~ 75 24 8.3 200 240 88 VHB200W-Q48-S28 18 ~ 75 28 7.1 200 280 88 VHB200W-Q48-S48 18 ~ 75 48 4.2 200 240 87 Notes: 1. ripple and noise are measured at 20 MHz BW with 10µF tantalum capacitor and 1µF ceramic capacitor across output PART NUMBER KEY VHB200W - QXX - SXX X Base Number Input Voltage Output Voltage cui.com Remote On/Off Control "blank" = positive logic N = negative logic For more information, please visit the product page. CUI Inc │ SERIES: VHB200W │ DESCRIPTION: DC-DC CONVERTER date 04/01/2013 │ page 2 of 4 INPUT parameter conditions/description operating input voltage under voltage lockout power up power down 24 48 24 48 V V V V min typ max units 10 18 24 48 36 75 Vdc Vdc input input input input 9.5 17 8.5 16 Vdc Vdc Vdc Vdc positive logic remote on/off1 filter Notes: PI type 1. logic compatibility, open collector ref to -input Module ON, >3.5 Vdc or open circuit Module OFF, <1.8 Vdc OUTPUT parameter conditions/description line regulation load regulation min typ max units measured from high line to low line ±0.2 % measured from full load to zero load ±0.2 % voltage accuracy transient response 25% step load change adjustability2 switching frequency 100% load, input voltage range temperature coefficient Notes: ±1.5 % 500 µs ±10 % 250 kHz ±0.03 %/°C 2. trim-up: connect a resistor between the trim pin and +Sense trim-down: connect a resistor between the trim pin and -Sense PROTECTIONS parameter conditions/description min over voltage protection %Vo 115 short circuit protection continuous current limit % nominal output current typ 110 thermal shutdown case temp. max units 140 % 150 110 % °C SAFETY AND COMPLIANCE parameter conditions/description isolation voltage input to output input to case output to case min typ 1,500 1,500 1,500 isolation resistance MΩ 1,000 safety approvals UL60950-1 RoHS compliant yes cui.com units Vdc Vdc Vdc 10 isolation capacitance max pF For more information, please visit the product page. CUI Inc │ SERIES: VHB200W │ DESCRIPTION: DC-DC CONVERTER date 04/01/2013 │ page 3 of 4 ENVIRONMENTAL parameter conditions/description min case operating temperature storage temperature humidity max units -40 typ 100 °C -55 105 °C 95 % max units non-condensing MECHANICAL parameter conditions/description dimensions 57.9 x 61.0 x 13.2 (2.28 x 2.40 x 0.52 inch) min case material aluminum baseplate with plastic case weight typ mm 114 g MECHANICAL DRAWING 57.90 2.280 4.60 0.181 2.03 0.080 (4 PLCS) 50.80 2.000 (2 PLCS) 4 5 3 6 61.00 2.402 7 15.24 0.600 (2 PLCS) M3x0.5 through (4 PLCS) Note: 2 8 1 9 35.56 1.400 (2 PLCS) 1.02 0.040 (5 PLCS) 48.25 BOTTOM VIEW Bottom View All dimensions in mm(inches) All specifications measured at 25°C, nominal input voltage, and full load unless otherwise noted. cui.com 13.20 0.520 PIN CONNECTIONS PIN FUNCTION 1 +Vin 2 On/Off 3 CASE 4 -Vin 5 -Vo 6 -S 7 TRIM 8 +S 9 +Vo For more information, please visit the product page. CUI Inc │ SERIES: VHB200W │ DESCRIPTION: DC-DC CONVERTER date 04/01/2013 │ page 4 of 4 REVISION HISTORY rev. description date 1.0 initial release 08/08/2008 1.01 new template applied 08/05/2011 1.02 add remote on/off control to the part number key 11/23/2011 1.03 features updated 12/20/2011 1.04 misc. updates and corrections 02/14/2012 1.05 V-Infinity branding removed 09/07/2012 1.06 updated spec 04/01/2013 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.