TDSL5150, TDSL5160 www.vishay.com Vishay Semiconductors Low Current 13 mm 7-Segment Display FEATURES • Low power consumption • Suitable for DC and multiplex operation • Evenly lighted segments • Grey package surface • Untinted segments • Luminous intensity categorized • Wide viewing angle 19237 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION APPLICATIONS The TDSL51.0 series are 13 mm character seven segment low current LED displays in a very compact package. • Panel meters The displays are designed for a viewing distance up to 7 m and available in high efficiency red. The grey package surface and the evenly lighted untinted segments provide an optimum on-off contrast. • Test- and measure-equipment All displays are categorized in luminous intensity groups. That allows users to assemble displays with uniform appearence. PRODUCT GROUP AND PACKAGE DATA • Point-of-sale terminals • Control units • Product group: Display • Package: 13 mm Typical applications include instruments, panel meters, point-of-sale terminals and household equipment. • Product series: Low current • Angle of half intensity: ± 50° PARTS TABLE PART COLOR LUMINOUS INTENSITY (μcd) MIN. TYP. MAX. WAVELENGTH at at FORWARD VOLTAGE at (nm) (V) IF IF IF (mA) MIN. TYP. MAX. (mA) MIN. TYP. MAX. (mA) CIRCUITRY TDSL5150 Red 280 400 - 2 612 - 625 2 - 1.8 2.4 2 Common anode TDSL5150-FG Red 280 - 900 2 612 - 625 2 - 1.8 2.4 2 Common anode TDSL5150-GH Red 450 - 1400 2 612 - 625 2 - 1.8 2.4 2 Common anode TDSL5160 Red 280 400 - 2 612 - 625 2 - 1.8 2.4 2 Common cathode TDSL5160-GH Red 450 - 1400 2 612 - 625 2 - 1.8 2.4 2 Common cathode ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TDSL5150, TDSL5150-FG, TDSL5150-GH, TDSL5160, TDSL5160-GH PARAMETER SYMBOL VALUE Reverse voltage per segment TEST CONDITION VR 6 V DC forward current per segment IF 15 mA Peak forward current per segment Surge forward current per segment Power dissipation IFM 45 mA tp 10 μs (non repetitive) IFSM 100 mA Tamb 45 °C PV 320 mW Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance LED junction/ambient Rev. 1.6, 17-Apr-13 UNIT t 3 s, 2 mm below seating plane Tj 100 °C Tamb - 40 to + 85 °C Tstg - 40 to + 85 °C Tsd 260 °C RthJA 180 K/W Document Number: 83123 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDSL5150, TDSL5160 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TDSL5150, TDSL5150-FG, TDSL5150-GH, TDSL5160, TDSL5160-GH, RED PARAMETER TEST CONDITION IF = 2 mA Luminous intensity per segment (1) (digit average) PART SYMBOL MIN. TYP. MAX. TDSL5150 IV 280 400 - TDSL5150-FG IV 280 - 900 TDSL5150-GH IV 450 - 1400 TDSL5160 IV 280 400 - TDSL5160-GH UNIT μcd IV 450 - 1400 IF = 5 mA IV - 1600 - IF = 20 mA, tp/T = 0.25 IV - 2000 - d 612 - 625 nm p - 635 - nm Dominant wavelength IF = 2 mA Peak wavelength IF = 2 mA Angle of half intensity - ± 50 - deg VF - 1.8 2.4 V VF - 2.7 3 V IF = 10 μA VR 6 20 - V VR = 0 V, f = 1 MHz Cj - 30 - pF IF = 2 mA IF = 2 mA Forward voltage per segment IF = 20 mA Reverse voltage per segment Junction capacitance TDSL5150, TDSL5150-FG, TDSL5150-GH, TDSL5160, TDSL5160-GH Note (1) I Vmin. and IV groups are mean values of all segments (a to g, D1 to D4), matching factor within segments is 0.5, excluding decimal points and colon. LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (μcd) STANDARD MIN. E 180 MAX. 360 F 280 560 G 450 900 H 700 1400 I 1100 2200 K 1800 3600 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 10° 20° 25 20 15 10 5 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 30° IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 80° 0 0 95 11484 20 40 60 80 Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.6, 17-Apr-13 0.6 100 Tamb - Ambient Temperature (°C) 0.4 0.2 0 95 10082 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 83123 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDSL5150, TDSL5160 www.vishay.com Vishay Semiconductors IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 red 10 1 tp/T = 0.001 tp = 10 µs 0.1 0 2 1 95 10050 3 4 1 0.1 1 VF - Forward Voltage (V) 10 100 IF - Forward Current (mA) 95 10061 Fig. 6 - Relative Luminous Intensity vs. Forward Current 1.2 IV rel - Relative Luminous Intensity 2.0 IV rel - Relative Luminous Intensity red 10 0.01 0.1 5 Fig. 3 - Forward Current vs. Forward Voltage red 1.6 1.2 0.8 0.4 IF = 2 mA 0 0 95 10051 100 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature red 1.0 0.8 0.6 0.4 0.2 0 590 610 630 650 670 690 λ - Wavelength (nm) 95 10040 Fig. 7 - Relative Intensity vs. Wavelength IV rel - Relative Luminous Intensity 2.4 10 red 9 8 7 6 2.0 a 1.6 f b g 1.2 0.8 e c DP d 0.4 95 10321 0 10 1 20 0.5 50 0.2 100 200 0.1 0.05 500 IF (mA) 0.02 tp/T Fig. 5 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Rev. 1.6, 17-Apr-13 1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 e d A(C) c DP b a A(C) f g 95 10896 Fig. 8 - TDSL51.. Document Number: 83123 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDSL5150, TDSL5160 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Drawing-No.: 6.544-5150.01-4 Issue: 1; 21.11.95 95 11344 Rev. 1.6, 17-Apr-13 Document Number: 83123 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VISHAY Display-10 mm Vishay Semiconductors Display-10 mm Package Dimensions in mm 95 11343 Document Number 83924 Rev. 1.1, 25-Mar-04 www.vishay.com 1 Display-10 mm VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 2 Document Number 83924 Rev. 1.1, 25-Mar-04 Pin Connections 10 mm VISHAY Vishay Semiconductors Pin Connections 10 mm 1 10 a 2 f b 9 g 3 4 8 c e d 5 DP 7 1 2 3 4 5 6 7 8 9 10 g f A(C) e d DP c A(C) b a 6 96 11678 Document Number 83993 Rev. 1.1, 07-Jul-04 www.vishay.com 1 Pin Connections 10 mm VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 2 Document Number 83993 Rev. 1.1, 07-Jul-04 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000