TDSR1350, TDSR1360 www.vishay.com Vishay Semiconductors High Intensity Red Low Current 7-Segment Display FEATURES • 1500 μcd typical at 1 mA • Very low power consumption • Wide viewing angle • Grey package surface • Light intensity categorized at IF = 1 mA • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 19237 APPLICATIONS DESCRIPTION This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology in color red. • Battery driven instruments • Telecom devices • Home appliances The supreme light intensity allows applications under direct sunlight or “black front” designs by using tinted filter glass in front of the display. • Instrumentation Typical 1500 μcd at 1 mA is best in class performance for applications with very limited power supply. The maximum forward current of 10 mA is allowed for an ambient temperature range of - 40 °C to + 85 °C without current derating. PRODUCT GROUP AND PACKAGE DATA Crosstalk between segments is possible at drive currents above 5 mA per segment. Therefore it is recommend to apply more than 5 mA only under direct sunlight or with tinted filter glass. • Angle of half intensity: ± 50° • POS terminals • Product group: Display • Package: 13 mm • Product series: Low current PARTS TABLE PART COLOR LUMINOUS INTENSITY (μcd) MIN. TYP. MAX. WAVELENGTH at at FORWARD VOLTAGE at (nm) (V) IF IF IF (mA) MIN. TYP. MAX. (mA) MIN. TYP. MAX. (mA) CIRCUITRY TDSR1350 Red 280 - 3600 1 - 640 - 1 - 1.8 2.4 1 Common anode TDSR1360 Red 280 - 3600 1 - 640 - 1 - 1.8 2.4 1 Common cathode TDSR1360-IK Red 1100 - 3600 1 - 640 - 1 - 1.8 2.4 1 Common cathode ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TDSR1350, TDSR1360, TDSR1360-IK PARAMETER TEST CONDITION Reverse voltage per segment DC forward current per segment Peak forward current per segment Power dissipation V mA IF 10 50 mA Tamb 85 °C PV 185 mW Storage temperature range Rev. 1.3, 17-Apr-13 UNIT 5 IFM Operating temperature range Thermal resistance LED junction/ambient VALUE VR tp 10 μs, duty cycle 1/10 Junction temperature Soldering temperature SYMBOL t 3 s, 2 mm below seating plane Tj 105 °C Tamb - 40 to + 85 °C Tstg - 40 to + 85 °C Tsd 260 °C RthJA 100 K/W Document Number: 85180 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDSR1350, TDSR1360 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TDSR1350, TDSR1360, TDSR1360-IK, RED PARAMETER TEST CONDITION PART SYMBOL TDSR1350 Luminous intensity per segment (digit average) IF = 1 mA TDSR1360 IV TDSR1360-IK MIN. TYP. MAX. 280 - 3600 280 - 3600 1100 - 3600 UNIT μcd Dominant wavelength IF = 1 mA d - 640 - Peak wavelength IF = 1 mA p - 650 - nm Angle of half intensity IF = 1 mA j - ± 50 - deg Forward voltage per segment or DP IF = 1 mA VF - 1.8 2.4 V Reverse voltage per segment or DP VR = 6 V IR - 10 - μA TDSR1350, TDSR1360, TDSR1360-IK nm LUMINOUS INTENSTIY CLASSIFICATION GROUP LIGHT INTENSITY (μcd) STANDARD MIN. MAX. F 280 560 G 450 900 H 700 1400 I 1100 2200 K 1800 3600 Note • The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped in one tube (there will be no mixing of two groups in one tube). In order to ensure availability, single brightness groups will not be orderable. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 10° 20° 25 20 15 10 5 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 30° IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 80° 0 0 18540 20 40 60 80 85 Tamb - Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.3, 17-Apr-13 0.6 100 0.4 0.2 0 95 10082 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 85180 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDSR1350, TDSR1360 www.vishay.com Vishay Semiconductors 1.2 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 10 1 1 1.5 2 2.5 3 VF - Forward Voltage (V) 95 10878 Fig. 3 - Forward Current vs. Forward Voltage IF = 10 mA red 1.0 0.8 0.6 0.4 0.2 0.0 560 580 600 620 640 660 680 700 720 18541 λ - Wavelength (mm) Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature 100 IV rel - Relative Luminous Intensity 10 9 8 7 6 a 10 f b g 1 e c DP d 0.1 0.1 1 10 100 IF - Forward Current (mA) 16120 Fig. 4 - Relative Luminous Intensity vs. Forward Current 1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 e d A(C) c DP b a A(C) f g 95 10896 Fig. 7 - TDSR13.. IV rel - Relative Luminous Intensity 1.6 red IF = 1 mA 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 16119 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature Rev. 1.3, 17-Apr-13 Document Number: 85180 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDSR1350, TDSR1360 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS FOR TDSR13.. in millimeters Drawing-No.: 6.544-5150.01-4 Issue: 1; 21.11.95 95 11344 Rev. 1.3, 17-Apr-13 Document Number: 85180 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000