For more information, please visit the product page. date 05/01/2015 page 1 of 4 SERIES: SJ1-351X-SMT │ DESCRIPTION: 3.5 MM AUDIO JACKS FEATURES • low profile design • switch options include: – no switch – tip switch – tip and ring switch • gold flash • plastic housing RoHS PART NUMBER KEY SJ1-351 X-SMT-X-X Base Number Switch Options 3 = no switch 4 = tip switch 5 = tip and ring switch Package Options "blank" = standard TR = Tape & Reel Color Options "blank" = black BE = blue* GR = green* PI = pink* *tip and ring switch model only SPECIFICATIONS parameter conditions/description min rated input voltage typ 12 rated input current contact resistance1 between terminal and mating plug between terminal in a closed circuit insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute 0.3 -25 life UL94V-0 RoHS 2011/65/EU Notes: A 50 30 mΩ mΩ 500 Vac 3 kg 500 g 85 5,000 flammability rating Vdc MΩ any direction for 10 seconds operating temperature 1. When measured at a current of less than 100 mA / 1 kHz cui.com units 1 100 insertion/withdrawal force terminal strength max °C cycles For more information, please visit the product page. CUI Inc │ SERIES: SJ1-351X-SMT │ DESCRIPTION: 3.5 MM AUDIO JACKS date 05/01/2015 │ page 2 of 4 MECHANICAL DRAWING units: mm[inches] TOLERANCE: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm MATERIAL PLATING terminal 1 copper alloy gold (min 0.5 μ") terminal 2 copper alloy gold (min 0.5 μ") terminal 3 copper alloy gold (min 0.5 μ") terminal 4 brass gold (min 0.5 μ") terminal 5 brass gold (min 0.5 μ") plastic PA6T 9.5 0.37 3.00 0.12 5.00 0.20 12.0 0.47 5.00 0.20 3.600 0.14 5.00 0.20 2.50 0.10 0.1 0.00 (TYP) 1.0 0.04 1.00 0.04 (TYP) 1.5 0.06 4.4 0.17 6.1 0.24 3.00 0.12 2.9 0.11 2.90X1.75 1.50 0.06 (2 PLCS) 4.9 0.19 3.3 0.13 0.9 0.04 5 1 3 5.00 0.20 4.50 0.18 1.50 0.06 +0.0 -0.1 (2 PLCS) 2 4 2.10X1.75 1.80X1.75 6.00 0.24 4 6.00 0.24 1.6 0.06 +0.1 -0.0 (2 PLCS) 2 1 3 5 1.00 0.04 (3 PLCS) 2.40X2.25 2.9 0.11 2.90X2.25 3.00 0.12 4.9 0.19 3.3 0.13 4.4 0.17 6.1 0.24 PCB LAYOUT TOP VIEW Model No. SJ1-3513-SMT SJ1-3514-SMT SJ1-3515-SMT 1 3 1 3 2 4 2 1 3 5 4 2 Schematic PIN 14 Ø 3.5 MATING PLUG 1 sleeve sleeve sleeve 2 tip tip tip 3 ring ring ring 4 NP tip switch tip switch 5 NP NP ring switch cui.com For more information, please visit the product page. CUI Inc │ SERIES: SJ1-351X-SMT │ DESCRIPTION: 3.5 MM AUDIO JACKS date 05/01/2015 │ page 3 of 4 SOLDERABILITY parameter conditions/description min typ max units reflow soldering see reflow profile 255 260 265 °C 270 260 250 240 217 180 150 120 60 50 °C 70 60 140 120 250 180 240 Time (second) cui.com 340 300 380 360 430 420 480 For more information, please visit the product page. CUI Inc │ SERIES: SJ1-351X-SMT │ DESCRIPTION: 3.5 MM AUDIO JACKS date 05/01/2015 │ page 4 of 4 REVISION HISTORY rev. description date 1.0 initial release 11/21/2005 1.01 new template applied 01/27/2012 1.02 added TR package and color options 11/01/2012 updated datasheet 05/01/2015 1.03 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.