MKT334 Vishay BCcomponents Series Impedance Film Capacitors Radial Potted Type FEATURES w l • 10 mm to 27.5 mm lead pitch (2) • Supplied loose in box, taped on ammopack or reel • Compliant to RoHS Directive 2002/95/EC h ENCAPSULATION Plastic case, epoxy resin sealed, flame retardant (UL-class 94 V-0) lt CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 55/105/56/B Ø dt P CAPACITANCE RANGE AND TOLERANCE APPLICATIONS Based on long term capacitance stability and good self-healing properties, these capacitors are intended for applications in series with the mains acting as voltage-dividing impedance. These capacitors are not allowed to be used as across-the-line capacitors. REFERENCE SPECIFICATIONS IEC 60384-14 (2) E6 series 0.01 µF to 2.2 µF, tolerance ± 20 % E12 series 0.01 µF to 2.2 µF, tolerance ± 10 % and ± 5 % Preferred values acc. to E6 LEADS Tinned wire RATED TEMPERATURE 110 °C MAXIMUM APPLICATION TEMPERATURE PERFORMANCE GRADE 105 °C Grade 1 (long life) DETAIL SPECIFICATION MARKING C-value, tolerance, rated voltage, manufacturer’s type, code for dielectric material, manufacturer’s location, manufacturer’s logo, year and week For more detailed data and test requirements contact: [email protected] DIELECTRIC Polyester film (1) ELECTRODES Metallized electrodes CONSTRUCTION Series construction RATED AC VOLTAGE AC 275 V; 50 Hz to 60 Hz PERMISSIBLE DC VOLTAGE DC 400 V Notes (1) For pitch = 15 mm, C < 15 nF, dielectric is polypropylene (2) 27.5 mm pitch parts - in progress Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 1 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 334 MULTIPLIER (nF) CAPACITANCE (numerically) 10.0 mm 15.0 mm 22.5 mm 27.5 mm 0.1 2 1 3 10 4 100 5 Example: BFC2 334 XX XX X 2222 (*) 334 XX XX X 104 = 10 x 10 = 100 nF (*) old ordering code TYPE PACKAGING Loose in box STANDARD DIMENSIONS Loose in box BFC2 334 20… BFC2 334 22… Loose in box Taped (1) PACKAGING Loose in box ammopack: H = 18.5 mm; P0 = 12.7 mm BFC2 334 28… lead length 3.5 mm + 1/- 0.5 mm or 3.5 mm ± 0.3 mm BFC2 334 10… lead length 5.0 mm ± 1.0 mm BFC2 334 12… Loose in box Loose in box BFC2 334 16… ammopack: H = 18.5 mm; P0 = 12.7 mm BFC2 334 18… BFC2 334 50… lead length 5.0 mm ± 1.0 mm BFC2 334 52… ±5% reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm BFC2 334 54… BFC2 334 56… ammopack: H = 18.5 mm; P0 = 12.7 mm ALTERNATIVE LARGER PITCH SIZES BFC2 334 58… C-TOL. CODE NUMBER lead length 3.5 mm +1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm BFC2 334 21… lead length 5.0 mm ± 1.0 mm BFC2 334 23… ± 20 % reel or ammopack: H = 18.5 mm; P0 = 12.7 mm BFC2 334 25… BFC2 334 27… lead length 3.5 mm +1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm BFC2 334 11… lead length 5.0 mm ± 1.0 mm BFC2 334 13… ± 10 % BFC2 334 15… reel or ammopack: H = 18.5 mm; P0 = 12.7 mm BFC2 334 17… lead length 3.5 mm +1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm BFC2 334 51… lead length 5.0 mm ± 1.0 mm lead length 25.0 mm ± 2.0 mm Taped (1) BFC2 334 14… lead length 3.5 mm + 1/- 0.5 mm or 3.5 mm ± 0.3 mm lead length 25.0 mm ± 2.0 mm Taped (1) ± 10 % reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm lead length 25.0 mm ± 2.0 mm Taped (1) BFC2 334 24… BFC2 334 26… lead length 25.0 mm ± 2.0 mm 334 ± 20 % reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm lead length 25.0 mm ± 2.0 mm Taped (1) CODE NUMBER lead length 5.0 mm ± 1.0 mm lead length 25.0 mm ± 2.0 mm Taped (1) C-TOL. lead length 3.5 mm + 1/- 0.5 mm or 3.5 mm ± 0.3 mm ±5% reel or ammopack: H = 18.5 mm; P0 = 12.7 mm BFC2 334 53… BFC2 334 55… BFC2 334 57… Note (1) For detailed type specifications refer to packaging information: www.vishay.com/doc?28139 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 28155 Revision: 22-Dec-10 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC voltage (URAC) 275 V Permissible DC voltage (URDC) 400 V Tangent of loss angle: AT 1 kHz AT 10 kHz C ≤ 0.1 µF ≤ 75 x 10-4 ≤ 110 x 10-4 0.1 µF < C ≤ 0.47 µF ≤ 75 x 10-4 ≤ 120 x 10-4 0.47 µF < C ≤ 2.2 µF ≤ 75 x ≤ 150 x 10-4 10-4 Rated voltage pulse slope (dU/dt)R at 400 VDC 200 V/µs 100 V/µs 70 V/µs 55 V/µs Imax. = 12.5 mm Imax. = 17.5 mm Imax. = 26.0 mm Imax. = 31.0 mm R between leads, for C ≤ 0.33 µF: at 100 V, 1 min > 30 000 MΩ RC between leads, for C > 0.33 µF: at 100 V, 1 min > 10 000 s R between interconnecting leads and casing: at 100 V, 1 min > 30 000 MΩ Withstanding (DC) voltage (cut off current 10 mA) (1), rise time ≤ 1000 V/s 720 V; 1 min Withstanding (AC) voltage between leads and case 2050 V; 1 min Maximum application temperature 105 °C Note (1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 Pitch: 10.0 mm; C-tol. = ± 20 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxI (mm) MASS (g) (3) Short leads It = 3.5 mm + 1 mm/- 0.5 mm It = 5.0 mm ± 1.0 mm Long leads SPQ It = 25.0 mm ± 2.0 mm AMMOPACK (1) LARGE REEL (500 mm) (1)(2) H = 18.5 mm P0 = 12.7 mm H = 18.5 mm P0 = 15.0 mm SPQ SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 20103 22103 24103 28103 0.015 20153 22153 24153 28153 20223 22223 20333 22333 0.047 20473 22473 24473 28473 0.068 20683 22683 24683 28683 20104 22104 0.022 0.033 0.1 4.0 x 10.0 x 12.5 5.0 x 11.0 x 12.5 0.7 0.8 1000 1000 24223 24333 24104 1250 1000 28223 28333 28104 950 750 26104 1900 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information Reel diameter = 356 mm is available on request (3) Weight for short lead product only (2) Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 3 MKT334 Vishay BCcomponents Series Impedance Film Capacitors Radial Potted Type Pitch: 10.0 mm; C-tol. = ± 10 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING AMMOPACK (1) LOOSE IN BOX C (µF) DIMENSIONS wxhxI (mm) MASS (g) (3) Short leads It = 3.5 mm + 1.0 mm/- 0.5 mm Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 10103 0.012 10123 0.015 10153 0.018 10183 0.022 10223 0.027 4.0 x 10.0 x 12.5 0.7 10273 0.033 10333 0.039 10393 0.047 10473 0.056 10563 0.068 10683 0.082 5.0 x 11.0 x 12.5 0.9 10823 0.1 6.0 x 12.0 x 12.5 1.2 10104 It = 5.0 mm ± 1.0 mm 12103 12123 12153 12183 12223 12273 12333 12393 12473 12563 12683 12823 12104 Long leads SPQ 1000 750 It = 25.0 mm ± 2.0 mm 14103 14123 14153 14183 14223 14273 14333 14393 14473 14563 14683 14823 14104 H = 18.5 mm P0 = 12.7 mm SPQ 1250 1000 750 LARGE REEL (500 mm) (1)(2) H = 18.5 mm P0 = 15.0 mm SPQ 18103 18123 18153 18183 18223 18273 18333 18393 18473 18563 18683 18823 18104 SPQ 950 750 600 16823 16104 1900 1500 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information Reel diameter = 356 mm is available on request (3) Weight for short lead product only (2) Pitch: 10.0 mm; C-tol. = ± 5 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING C (µF) DIMENSIONS wxhxI (mm) AMMOPACK (1) LOOSE IN BOX MASS (g) (3) Short leads Long leads It = It = 3.5 It = SPQ SPQ + 1.0 mm/- 0.5 mm 5.0 ± 1.0 mm 25.0 ± 2.0 mm Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 54103 50103 52103 0.012 50123 52123 54123 0.015 50153 52153 54153 0.018 50183 52183 54183 0.022 50223 52223 54223 0.027 4.0 x 10.0 x 12.5 0.7 50273 52273 54273 1250 1000 0.033 50333 52333 54333 0.039 50393 52393 54393 0.047 50473 52473 54473 0.056 50563 52563 54563 0.068 50683 52683 54683 0.082 5.0 x 11.0 x 12.5 0.9 50823 52823 54823 1000 0.1 6.0 x 12.0 x 12.5 1.2 50104 52104 750 54104 750 H = 18.5 mm P0 = 12.7 mm LARGE REEL (500 mm) (1) (2) H = 18.5 mm P0 = 15.0 mm SPQ 58103 58123 58153 58183 58223 58273 58333 58393 58473 58563 58683 58823 58104 SPQ 950 750 600 56823 56104 1900 1500 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information Reel diameter = 356 mm is available on request (3) Weight for short lead product only (2) www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 28155 Revision: 22-Dec-10 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents Pitch: 15.0 mm; C-tol. = ± 20 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING LOOSE IN BOX REEL (500 mm) (1)(2) DIMENSIONS H = 18.5 mm C MASS Short leads Long leads wxhxI P0 = 12.7 mm (3) (µF) (g) (mm) It = It = It = 3.5 mm 5.0 mm SPQ 25.0 mm SPQ SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm Pitch = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 21103 23103 25103 27103 0.015 21153 23153 25153 27153 0.022 21223 23223 25223 27223 0.033 21333 23333 25333 27333 5.0 x 11.0 x 17.5 1.2 1250 1000 1100 0.047 21473 23473 25473 27473 0.068 21683 23683 25683 27683 0.1 21104 23104 25104 27104 0.15 20154 22154 24154 26154 0.22 6.0 x 12.0 x 17.5 1.6 20224 22224 1000 24224 1000 26224 900 Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.33 20334 22334 24334 26334 8.5 x 15.0 x 17.5 2.8 750 500 650 0.47 20474 22474 24474 26474 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) (3) Reel diameter = 356 mm is available on request Weight for short lead product only Pitch: 15.0 mm; C-tol. = ± 10 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING LOOSE IN BOX REEL (500 mm) (1)(2) DIMENSIONS H = 18.5 mm C MASS Short leads Long leads wx h x I P0 = 12.7 mm (3) (µF) (g) (mm) It = It = It = 3.5 mm 5.0 mm SPQ 25.0 mm SPQ SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm Pitch = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 11103 13103 15103 17103 0.012 11123 13123 15123 17123 0.015 11153 13153 15153 17153 0.018 11183 13183 15183 17183 0.022 11223 13223 15223 17223 0.027 11273 13273 15273 17273 0.033 11333 13333 15333 17333 5.0 x 11.0 x 17.5 1.2 1250 1100 0.039 11393 13393 15393 17393 1000 0.047 11473 13473 15473 17473 0.056 11563 13563 15563 17563 0.068 11683 13683 15683 17683 0.082 11823 13823 15823 17823 0.1 11104 13104 15104 17104 0.12 10124 12124 14124 16124 0.15 10154 12154 14154 16154 6.0 x 12.0 x 17.5 1.6 1000 900 0.18 10184 12184 14184 16184 Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.22 10224 12224 14224 16224 7.0 x 13.5 x 17.5 2.1 800 0.27 10274 12274 14274 16274 750 500 0.33 10334 12334 14334 16334 8.5 x 15.0 x 17.5 2.8 650 0.39 10394 12394 14394 16394 0.47 10.0 x 16.5 x 17.5 3.6 10474 12474 500 14474 450 16474 600 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 5 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents Pitch: 15.0 mm; C-tol. = ± 5 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING REEL (500 mm) (1)(2) H = 18.5 mm P0 = 12.7 mm LOOSE IN BOX C (µF) DIMENSIONS wx h x I (mm) MASS (g) (3) Short leads Long leads It = It = It = SPQ 3.5 mm 5.0 mm 25.0 mm ± 0.3 mm ± 1.0 mm ± 2.0 mm Pitch = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 51103 53103 55103 0.012 51123 53123 55123 0.015 51153 53153 55153 0.018 51183 53183 55183 0.022 51223 53223 55223 0.027 51273 53273 55273 0.033 51333 53333 55333 5.0 x 11.0 x 17.5 1.2 1250 0.039 51393 53393 55393 0.047 51473 53473 55473 0.056 51563 53563 55563 0.068 51683 53683 55683 0.082 51823 53823 55823 0.1 51104 53104 55104 0.12 50124 52124 54124 0.15 50154 52154 54154 6.0 x 12.0 x 17.5 1.6 1000 0.18 50184 52184 54184 Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.22 50224 52224 54224 7.0 x 13.5 x 17.5 2.1 0.27 50274 52274 54274 750 0.33 50334 52334 54334 8.5 x 15.0 x 17.5 2.8 0.39 50394 52394 54394 0.47 10.0 x 16.5 x 17.5 3.6 50474 52474 500 54474 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only SPQ SPQ 57103 57123 57153 57183 57223 57273 57333 57393 57473 57563 57683 57823 57104 56124 56154 56184 1000 56224 56274 56334 56394 56474 500 450 1100 900 800 650 600 Pitch: 22.5 mm; C-tol. = ± 20 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING C (µF) DIMENSIONS wx hxI (mm) LOOSE IN BOX MASS (g) (1) Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.15 0.22 6.0 x 15.5 x 26.0 2.9 0.33 0.47 0.68 8.5 x 18.0 x 26.0 5.0 1.0 10.0 x 19.5 x 26.0 6.6 1.5 12.0 x 22.0 x 26.0 8.8 Notes • SPQ = Standard Packing Quantity (1) Weight for short lead product only www.vishay.com 6 Short leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm 21154 21224 21334 21474 20684 20105 20155 23154 23224 23334 23474 22684 22105 22155 Long leads SPQ 300 200 200 200 For technical questions, contact: [email protected] It = 25.0 mm ± 2.0 mm 25154 25224 25334 25474 24684 24105 24155 SPQ 250 250 200 200 Document Number: 28155 Revision: 22-Dec-10 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents Pitch: 22.5 mm; C-tol. = ± 10 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING C (µF) DIMENSIONS wxhxI (mm) LOOSE IN BOX MASS (g) (1) Short leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm 11154 11184 11224 11274 11334 11394 11474 10564 10684 10824 10105 10125 13154 13184 13224 13274 13334 13394 13474 12564 12684 12824 12105 12125 Long leads SPQ It = 25.0 mm ± 2.0 mm SPQ Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.15 0.18 0.22 6.0 x 15.5 x 26.0 0.27 0.33 0.39 0.47 7.0 x 16.5 x 26.0 0.56 0.68 8.5 x 18.0 x 26.0 0.82 1.0 10.0 x 19.5 x 26.0 1.2 12.0 x 22.0 x 26.0 Notes • SPQ = Standard Packing Quantity (1) Weight for short lead product only 2.9 3.5 5.0 6.6 8.8 300 200 150 15154 15184 15224 15274 15334 15394 15474 14564 14684 14824 14105 14125 250 200 Pitch: 22.5 mm; C-tol = ± 5 % CATALOG NUMBER BFC2 334 ..... AND PACKAGING C (µF) DIMENSIONS wxhxI (mm) LOOSE IN BOX MASS (g) (1) It = 3.5 mm ± 0.3 mm Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.15 0.18 0.22 6.0 x 15.5 x 26.0 2.9 0.27 0.33 0.39 0.47 7.0 x 16.5 x 26.0 3.5 0.56 0.68 8.5 x 18.0 x 26.0 5.0 0.82 1.0 10.0 x 19.5 x 26.0 6.6 1.2 12.0 x 22.0 x 26.0 8.8 Notes • SPQ = Standard Packing Quantity (1) 51154 51184 51224 51274 51334 51394 51474 50564 50684 50824 50105 50125 Short leads It = 5.0 mm ± 1.0 mm 53154 53184 53224 53274 53334 53394 53474 52564 52684 52824 52105 52125 SPQ 300 200 150 Long leads It = SPQ 25.0 mm ± 2.0 mm 55154 55184 55224 55274 55334 55394 55474 54564 54684 54824 54105 54125 - 250 200 Weight for short lead product only Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 7 MKT334 Vishay BCcomponents Series Impedance Film Capacitors Radial Potted Type Pitch: 27.5 mm; C-tol. = ± 20 % - IN PROGRESS CATALOG NUMBER BFC2 334 ..... AND PACKAGING C (µF) DIMENSIONS wx h x I (mm) LOOSE IN BOX MASS (g) (1) Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.68 9.0 x 19.0 x 31.5 6.6 1.0 1.5 11.0 x 21.0 x 31.0 8.6 2.2 13.0 x 23.0 x 31.0 11.0 Notes • SPQ = Standard Packing Quantity (1) Short leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm 21684 21105 21155 20225 23684 23105 23155 22225 Long leads SPQ It = 25.0 mm ± 2.0 mm 100 25684 25105 25155 24225 SPQ 150 125 Weight for short lead product only Pitch: 27.5 mm; C-tol. = ± 10 % - IN PROGRESS CATALOG NUMBER BFC2 334 ..... AND PACKAGING C (µF) DIMENSIONS wxh xI (mm) LOOSE IN BOX MASS (g) (1) Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.68 0.82 9.0 x 19.0 x 31.5 6.6 1.0 1.2 Long leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm SPQ It = 25.0 mm ± 2.0 mm 11684 13684 15684 11824 13824 15824 11105 13105 15105 100 11125 13125 10155 12155 14155 11.0 10185 12185 14185 14.8 10225 12225 14225 11.0 x 21.0 x 31.0 8.6 1.8 13.0 x 23.0 x 31.0 2.2 15.0 x 25.0 x 31.5 1.5 Short leads SPQ 150 15125 125 Notes • SPQ = Standard Packing Quantity (1) Weight for short lead product only Pitch: 27.5 mm; C-tol. = ± 5 % - IN PROGRESS CATALOG NUMBER BFC2 334 ..... AND PACKAGING C (µF) DIMENSIONS wxh xI (mm) LOOSE IN BOX MASS (g) (1) Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.68 0.82 9.0 x 19.0 x 31.5 6.6 1.0 1.2 Short leads Long leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm 51684 53684 51824 53824 55824 51105 53105 55105 51125 53125 50155 52155 54155 SPQ It = 25.0 mm ± 2.0 mm 55684 100 150 55125 11.0 x 21.0 x 31.0 8.6 1.8 13.0 x 23.0 x 31.0 11.0 50185 52185 54185 2.2 15.0 x 25.0 x 31.5 14.8 50225 52225 54225 1.5 SPQ 125 Notes • SPQ = Standard Packing Quantity (1) Weight for short lead product only www.vishay.com 8 For technical questions, contact: [email protected] Document Number: 28155 Revision: 22-Dec-10 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specification refer to “Packaging Information” www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed Circuit Board The maximum space for length (Imax.), width (wmax.) and height (hmax. ) of film capacitors to take in account on the printed-circuit board is shown in the drawings. • For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm; Δh = 0.1 mm • For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm; Δh = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = W + Δ Eccentricity Imax. = I + Δ CBA116 hmax. = h + Δ Seating plane SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 Storage Temperature • Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 9 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents CHARACTERISTICS Capacitance change as a function of frequency (typical curve) 6 2 ΔC/C (%) ΔC/C (%) 1 kHz Capacitance change as a function of free air temperature (typical curve) 4 1 2 0 max. 0 -1 typical -2 -2 -4 min. -6 - 60 20 - 20 60 -3 102 Tamb (°C) 100 Tangent of loss angle as a function of frequency (typical curves) 103 104 f (Hz) 105 Insulation resistance (RC) as a function of ambient free air temperature (typical curve) 103 5 4 3 2 1 RC (s) Dissipation factor (x 10-4) 105 104 102 101 102 103 Curve 1: C ≤ 0.33 µF Curve 2: 0.33 µF < C ≤ 1.2 µF Curve 3: 1.2 µF < C ≤ 3.9 µF Curve 4: 3.9 µF < C < 6.8 µF Curve 5: C ≥ 6.8 µF 103 104 102 - 60 105 - 20 20 60 Tamb (°C) 100 Max. RMS voltage (sine wave) as a function of frequency at Tamb ≤ 105 °C AC voltage (V) 1000 f (Hz) 100 100 nF 470 nF 10 101 www.vishay.com 10 102 103 104 f (Hz) For technical questions, contact: [email protected] 105 Document Number: 28155 Revision: 22-Dec-10 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents APPLICATION NOTES • These capacitors are suitable for the application as voltage-division impedance in series with the mains (50 Hz/60 Hz) with a maximum mains voltage of URAC. • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: [email protected] • These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described under item 7. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. • The peak voltage (Up) shall not be greater than the permissible DC voltage (URDC). • The peak-to-peak voltage (Up-p) shall not be greater than 2 √2 x URAC to avoid the ionization inception level. • The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: ∫ ( dt T 2x 0 dU ) 2 x dt < URDC x ( ) dU dt rated • T is the pulse duration • The rated voltage pulse slope is valid for ambient temperatures up to 105 °C. • The maximum component surface temperature must be lower than 105 °C. • Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: “Heat conductivity”. This is normally fulfilled by the impedance of the device in series with capacitor or by an additional resistor. HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/°C Wmax. (mm) 4.0 HEAT CONDUCTIVITY (mW/°C) Pitch 10 mm Pitch 15 mm Pitch 22.5 mm Pitch 27.5 mm 6.0 - - - 4.5 - - - - 5.0 7.5 10 - - 6.0 9.0 11 19 - 7.0 - 12 21 - 8.5 - 16 25 - 9.0 - - - 30 10.0 - 18 28 33 11.0 - - - 36 12.0 - - 31 - 13.0 - - - 42 15.0 - - - 48 18.0 - - - 57 Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 11 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents INSPECTION REQUIREMENTS General notes: 1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-3 and Specific Reference Data”. Group C inspection requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) Initial measurements As specified in chapters “General Data” of this specification Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s No visible damage Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance ¦ΔC/C¦ ≤ 5 % of the value measured initially. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured initially Insulation resistance As specified in section “Specific Reference Data” of this specification SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature No visible damage Method: 1 Legible marking Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 Rapid change of temperature θA = - 55 °C θB = + 105 °C 5 cycles Duration t = 30 min www.vishay.com 12 For technical questions, contact: [email protected] Document Number: 28155 Revision: 22-Dec-10 MKT334 Series Impedance Film Capacitors Radial Potted Type SUB-CLAUSE NUMBER AND TEST Vishay BCcomponents CONDITIONS PERFORMANCE REQUIREMENTS 4.6.1 Inspection Visual examination No visible damage 4.7 Mounting: see section “Mounting” of this specification Vibration Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 h 4.7.2 Final inspection Visual examination 4.9 Mounting: see section “Mounting” for more information Shock No visible damage Pulse shape: half sine Acceleration: 490 m/s² Duration of pulse: 11 ms 4.9.2 Final measurements Visual examination No visible damage Capacitance Tangent of loss angle ¦ΔC/C¦ ≤ 5 % of the value measured initially. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured initially Insulation resistance As specified in section “Specific Reference Data” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 105 °C Duration: 16 h 4.11.3 Damp heat cyclic Test Db First cycle 4.11.4 Cold 4.11.5 Damp heat cyclic Test Db remaining cycles 4.11.6 Final measurements Temperature: - 55 °C Duration: 2 h Visual examination Capacitance Tangent of loss angle No visible damage Legible marking ¦ΔC/C¦ ≤ 5 % of the value measured in 4.11.1. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.11.1. Voltage proof No permanent breakdown or flash-over 720 VDC, 1 min between terminations Insulation resistance ≥ 50 % of values specified in section “Specific Reference Data” of this specification Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 13 MKT334 Series Impedance Film Capacitors Radial Potted Type Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB GROUP C2 4.12 Damp heat steady state 56 days; 40 °C; 90 % to 95 % RH no load 4.12.1 Initial measurements Capacitance Tangent of loss angle: At 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance ¦ΔC/C¦ ≤ 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.12.1. Voltage proof No permanent breakdown or flash-over 720 VDC, 1 min between terminations Insulation resistance ≥ 50 % of values specified in section “Specific Reference Data” of this specification SUB GROUP C2A 4.12A Damp heat steady state 1000 h; 40 °C; 90 % to 95 % RH Loading voltage: 1 x URAC 4.12.1A Initial measurements Capacitance Tangent of loss angle: At 1 kHz 4.12.3A Final measurements Visual examination No visible damage Legible marking Capacitance ¦ΔC/C¦ ≤ 5 % of the value measured in 4.12.1A. Tangent of loss angle Increase of tan δ: ≤ 0.008 Compared to values measured in 4.12.1A. Voltage proof No permanent breakdown or flash-over 720 VDC; 1 min between terminations Insulation resistance ≥ 50 % of values specified in section “Specific Reference Data” of this specification SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz www.vishay.com 14 For technical questions, contact: [email protected] Document Number: 28155 Revision: 22-Dec-10 MKT334 Series Impedance Film Capacitors Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS Vishay BCcomponents PERFORMANCE REQUIREMENTS SUB-GROUP C3 4.14 Endurance Duration: 2000 h 1.25 x URAC at 105 °C 4.14.7 Final measurements Visual examination No visible damage Legible marking Capacitance ¦ΔC/C¦ ≤ 5 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.13.1. Voltage proof 720 VDC, 1 min between No permanent breakdown or flash-over terminations. 2050 VAC, 1 min between terminations and case Insulation resistance ≥ 50 % of values specified in section “Specific Reference Data” of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles Charged to 400 VDC Discharge resistance: 400 V DC R = ------------------------------------------1.5 × C ( dU ⁄ dt ) 4.15.1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.15.3 Final measurements Capacitance ¦ΔC/C¦ ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.15.1. Insulation resistance ≥ 50 % of values specified in section “Specific Reference Data” of this specification Document Number: 28155 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 15 MKT334 Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST Series Impedance Film Capacitors Radial Potted Type CONDITIONS PERFORMANCE REQUIREMENTS Bore of gas jet: Ø 0.5 mm After removing test flame from capacitor, the Fuel: butane capacitor must not continue to burn for more than Test duration for actual volume V in mm³: 10 s. No burning particle must drop from the V ≤ 250: 10 s sample. SUB-GROUP C6 4.17 Passive flammability Class B 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application 12 mm ~ 8 mm 45.0° SUB-GROUP C7 4.18 Active flammability 20 x 1.2 kV discharges on the test capacitor The cheese cloth around the capacitors shall not connected to URAC burn with a flame. No electrical measurements are required. www.vishay.com 16 For technical questions, contact: [email protected] Document Number: 28155 Revision: 22-Dec-10 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000