Space Saving Cable Management Rack Systems

SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
9:57 AM
Page 1
Space Saving
Cable Management
Rack Systems
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
9:59 AM
Page 2
Maximize Space Utilization,
Enhance Network Reliability
Panduit’s Unified Physical
Infrastructure (UPI):
a Guiding Approach
The trend towards consolidation, virtualization and automation in the enterprise is driving the
need to maximize space utilization to reduce capital expenditures and operational costs while
maintaining network reliability and availability. This trend is placing greater demands on the
physical infrastructure to help manage growing cable densities, larger network equipment
and increasing energy usage.
A unified approach to physical and logical
systems architecture is imperative for
solutions to fully address the need for
availability, agility, integration, and security.
Space Optimized, High Capacity Cable Management Systems
Panduit has developed the industry’s most
comprehensive and holistic approach
to a Unified Physical Infrastructure and can
help enterprises align, converge, and
optimize critical systems – communication,
computing, control, power, and security – to
build a smarter, unified business foundation.
Mitigate Risk – Efficient physical infrastructure
management enables seamless integration
to reduce risks which can occur throughout
core systems.
Lower Cost – Panduit physical infrastructure
solutions drive financial advantages to
reduce energy and occupancy costs, and
help secure competitive advantage.
Increase Agility – A high level of integration
within the physical infrastructure enables
flexibility and improved business agility.
Enhance Sustainability – UPI-based solution
offerings enable organizations to meet
sustainability goals by driving resource
and energy efficiencies across the
physical infrastructure.
Panduit builds on years of experience as a leader in cable management, integrating
best practices and application knowledge to develop highly reliable and efficient physical
infrastructure solutions. Panduit’s comprehensive offering of vertical cable management,
horizontal cable management, and rack solutions reduces space required to route, manage
and protect high cable capacities, providing the lowest total cost of ownership. These
product sets can be combined to provide an optimized solution for virtually any application.
PatchRunner™ and NetRunner™ Vertical Cable Management Systems address the needs
of the data center and telecommunications rooms to deliver improved network performance
and reduced real estate costs. Superior cable management features and innovative vertical
RU mounting maximize capacity and enable efficient moves, adds, and changes to reduce
operational costs.
PatchRunner™ High Capacity Vertical Cable Management System
PatchRunner™ High Capacity Vertical Cable Managers are optimized to provide the maximum
amount of capacity, flexibility and accessibility for high density switch and server applications.
NetRunner™ High Capacity Vertical Cable Management System
NetRunner™ High Capacity Vertical Cable Managers are designed to provide the best
combination of features and value for standard density enterprise telecommunications
rooms and data center applications.
Thermal Management
Panduit’s passive, optimized thermal management solutions enable high density, high heat
load data center design while reducing energy costs.
2 Post and 4 Post Racks
PatchRunner™ and NetRunner™ High Capacity Systems can be seamlessly integrated into
Panduit’s versatile 2 post and 4 post racks. Designed for today’s larger network equipment,
Panduit racks provide strength, capacity and thermal features that help ensure network
availability. The 2 post and 4 post rack thermal accessories provide proper heat dissipation
of active equipment, improving network reliability.
2
visit www.panduit.com
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/13/2012
2:22 PM
Page 3
Reduce Real Estate Cost and Space Utilization by 35%
with Panduit High Capacity Cable Management Systems
Panduit High Capacity Cable Management Systems enable the maximum amount of cables to be managed in a minimum amount of space,
reducing the square footage required to deploy high density network switching and patching by up to 35%. Innovative cable management
features allow efficient organization and protection of high performance copper and fiber optic cables, enhancing network reliability and
reducing operational expense.
Layout
Footprint Width
Areas
Real Estate Cost
Traditional
NetRunner™ Vertical
Cable Management System
High Density
PatchRunner™ High Capacity Vertical
Cable Management System
Vertical Patching
PatchRunner™ High Capacity Vertical
Cable Management System
114.6" (2.91m)
68.6" (1.74m)
44.3" (1.13m)
21.1 Sq. ft.
13.4 Sq. ft.
8.7 Sq. ft.
$54,016
$34,304
$22,272
Real estate cost based on a 2010 Gartner estimate for a Tier 3 data center.
Refer to page 18 and 19 for capacity and space requirements for specific solutions.
3
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
10:04 AM
Page 4
High Density Solutions for the
Cisco^ Nexus 7010 Switch
High performance network switching requires innovations to be extended
into every aspect of the physical infrastructure. New concepts for managing
equipment, connectivity, and available space are needed to provide maximum
density, scalability and usability. The PatchRunner™ High Capacity Vertical
Cable Management System with 4 post rack equipment management offers
the highest cable capacities for maximum densities, vertical patching and
accessories for scalability and superior space utilization.
Maximum Capacity with Minimal Space
• Vertical patching enables
two Cisco^ Nexus 7010
Switches to be deployed
within a single rack,
eliminating the need for
a separate patching rack
• Strong, flexible fingers
support Category 6A
cables without deforming
• Enables standard 19"
patch panels to be
mounted vertically, freeing
up rack spaces for
additional equipment
• Allows patch panels to
be positioned near
switch ports, optimizing
patch cord lengths
• Accepts either copper
or fiber patch panels
• Minimizes slacking and
allows for a more efficient
use of the vertical
manager space
4
visit www.panduit.com
^Cisco is a registered trademark of Cisco Technology Inc.
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/9/2012
10:47 AM
Page 5
Maximum Versatility and Strength
• The 4 post rack depth
encases Nexus 7010
switches, providing
increased
physical protection
• Rack features allow quick
POU mounting
• UL listed 2500 lb. (1134kg)
load rating securely
supports two Nexus 7010
switches and cabling
Infrastructure Showcase
• The NEW push shut
door with visual and audible
feedback delivers a clean
aesthetic look
• End panels enable the
vertical managers to be
closed off, increasing
protection and providing
a clean look at the end
of your lineup
visit www.panduit.com
5
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/13/2012
2:55 PM
Page 6
High Density Solutions for the Cisco^ Nexus 7009 Switch
Effectively deploying the latest high performance network switches requires in-depth knowledge of cable management,
infrastructure, thermal management, and the ability to apply that knowledge in the creation of superior solutions.
Equipment management is part
of the foundation of the Unified
Physical InfrastructureSM (UPI)
approach, providing full structure
protection of equipment, delivering
UL rated support, and respecting
equipment airflow patterns. Vertical
cable management that not only
provides slacking of patch cords,
but goes beyond in the ability to
support options to simplify system
organization and interface to the
system-wide infrastructure.
• FiberRunner® and Wyr-Grid® Overhead
Routing Systems (depicted at top left
and right) route, manage, and protect
cables throughout the data center*.
Cable Management
Infrastructure
Thermal Management
• Space
between
individual
fingers
organize up
to 48 Category
6A cables
• Vertically
oriented strain
relief bars
effectively
manage
structured
cabling in the
rear of the rack
and provide
separation of
cable types
• Open areas
respect
equipment
airflow
patterns
• Deep vertical
managers
provide space
to manage
high densities
• Flexible
power outlet
unit mounting
for any
equipment
power
requirements
• Front to back
spaces can be
closed off for
hot/cold aisle
applications
*Download the Wyr-Grid® Overhead Cable Tray Routing System brochure (SA-RKCB18) and FiberRunner® Application Guide (SA-FRCB02) at www.panduit.com.
6
visit www.panduit.com
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
10:20 AM
Page 7
Thermal Management Solutions for Cisco^ Nexus 7000
and Catalyst 6500 Series Network Switches
For network equipment that utilize side-to-side airflow patterns, such as the Cisco Nexus 7009, 7018, and Catalyst 6500 Series Switches,
rack mounted exhaust ducts can be used to optimize cooling efficiency by establishing a front to back airflow pattern.
Controlling Exhaust Air via Ducting
• A thermal exhaust duct prevents
preheated air exhausted from a
side-to-side airflow switch from
entering the adjacent switch inlet
4 post rack configured without
thermal exhaust duct
Panduit 4 post rack thermal ducts shown
in a dual Nexus 7009 switch deployment.
4 post rack configured with a
thermal exhaust duct illustrating
a front to back airflow pattern
Shown below is a front access cross sectional view of a multi-rack lineup, demonstrating thermal exhaust temperatures both with
and without thermal exhaust ducts.
Temperature (°C)
No Thermal Exhaust Duct
60
55
50
45
40
35
30
25
20
By redirecting the exhaust, the
following benefits are achieved
• Lower inlet temperatures
• Variable speed fans run at
slower speeds
• Decreased thermal stress on
system, improving reliability
• Decreased energy usage
15
Temperature (°C)
Thermal Exhaust Duct on Each Switch
60
55
50
45
40
35
30
25
20
15
visit www.panduit.com
7
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
1
10:24 AM
Page 8
4 Post Rack
R4P
84.0"H x 23.25"W x 30.0"D
45 rack spaces
R4P23
84.0"H x 23.25"W x 23.0"D
45 rack spaces
R4P36
84.0"H x 23.25"W x 36.0"D
45 rack spaces
R4P42
84.0"H x 23.25"W x 41.5"D
45 rack spaces
2
2/6/2012
PatchRunner ™ High Capacity
Vertical Cable Management System
The capacity of this vertical manager is ideal for Category 6A cabling or other
High Speed Data Transport cabling. Integral EIA zero rack space mounting capability
in the back of the manager allows equipment to be patched in the PatchRunner™
High Capacity Vertical Cable Manager, freeing up valuable rack space for equipment
and allowing the use of shorter length patch cords.
PEV12
• PatchRunner™ High Capacity
Vertical Cable Managers
• Available in 6", 8", 10",
and 12" widths
3
4
3
PED12
• PatchRunner™ High Capacity
Dual Hinged Metal Doors
• Available in 6", 8", 10",
and 12" widths
2
4
7
R4PWF
• Rack Top Trough with
Waterfall creates pathway
above rack
5
5
NCMH2
• NetManager™ Horizontal
Cable Manager
6
NM2
• NetManager™ High Capacity
Horizontal Cable Manager
6
7
PEHF3
• PatchRunner™ High Capacity
Horizontal Cable Manager
8
8
RFG6X8
• Cool Boot ® Raised Floor Air
Sealing Grommet
1
8
visit www.panduit.com
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/9/2012
11:02 AM
Page 9
PatchRunner™ High Capacity Vertical Cable Managers
• High capacity minimizes area required for network layout,
freeing up valuable floor space
• Allows vertical mounting of many standard EIA 19"
accessories, such as patch panels
• Ventilated side walls provide maximum airflow for
equipment cooling
Part Number
• Snap-on finger sections can be removed to improve airflow,
and break away fingers allow routing of large cable bundles
• Large finger spacing accommodates up to 48
Category 6A cables
• Optional sure close dual hinged metal doors provide easy
access to vertical pathway and provide visual and audible
feedback on closure
Part Description
No. of
Rack
Spaces‡
Std.
Pkg.
Qty.
High Capacity Dual Sided Vertical Managers
PEV6*
Dimensions: 83.5"H x 6.0"W x 28.1"D
(2120mm x 152mm x 714mm).
45
1
PEV8*
Dimensions: 83.5"H x 8.0"W x 28.1"D
(2120mm x 203mm x 714mm).
45
1
PEV10*
Dimensions: 83.5"H x 10.0"W x 28.1"D
(2120mm x 254mm x 714mm).
45
1
PEV12*
Dimensions: 83.5"H x 12.0"W x 28.1"D
(2120mm x 305mm x 714mm).
45
1
High Capacity Single Sided Vertical Managers
PEVF6*
Dimensions: 83.5"H x 6.0"W x 15.9"D
(2120mm x 152mm x 404mm).
45
1
PEVF8*
Dimensions: 83.5"H x 8.0"W x 15.9"D
(2120mm x 203mm x 404mm).
45
1
PEVF10*
Dimensions: 83.5"H x 10.0"W x 15.9"D
(2120mm x 254mm x 404mm).
45
1
PEVF12*
Dimensions: 83.5"H x 12.0"W x 15.9"D
(2120mm x 305mm x 404mm).
45
1
PatchRunner™ High Capacity Dual Hinged Metal Doors
PEV
PEVF
PED6*
Dimensions: 82.8"H x 6.1"W x 1.7"D
(2103mm x 155mm x 43mm).
45
1
PED8*
Dimensions: 82.8"H x 8.1"W x 1.7"D
(2103mm x 206mm x 43mm).
45
1
PED10*
Dimensions: 82.8"H x 10.1"W x 1.7"D
(2103mm x 256mm x 43mm).
45
1
PED12*
Dimensions: 82.8"H x 12.1"W x 1.7"D
(2103mm x 307mm x 43mm).
45
1
PEVEP
End Panel.
Dimensions: 83.7"H x 23.2"W x .5"D
(2125mm x 590mm x 12mm).
—
1
PEVBRC6
Horizontal cross brace bend radius control clips for
PatchRunner ™ High Capacity Vertical Cable Managers
PEV6 and PEVF6.
—
1
PEVBRC8
Horizontal cross brace bend radius control clips for
PatchRunner ™ High Capacity Vertical Cable Managers
PEV8 and PEVF8.
—
1
PEVBRC10
Horizontal cross brace bend radius control clips for
PatchRunner ™ High Capacity Vertical Cable Managers
PEV10 and PEVF10.
—
1
PEVBRC12
Horizontal cross brace bend radius control clips for
PatchRunner ™ High Capacity Vertical Cable Managers
PEV12 and PEVF12.
—
1
SRB19D7BL
Strain relief bar extends 7" off the rack; supports,
manages, and provides proper bend radius protection.
Ideal for use with Category 6A copper cabling
installations.
—
1
Accessories
PED
PEVBRC
PEVEP
SRB19D7BL
*For part numbers that fit 8' rack, add “96” to end of part number. Overall height for managers is 95.5" (2426mm).
Overall door height is 94.4" (2399mm).
‡One rack space = 1.75" (44.45mm).
All product color is black.
For PatchRunner™ High Capacity Vertical Cable Manager Specifications, see page18.
visit www.panduit.com
9
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
1
NRV12
• 12"W Front and Rear Vertical
Manager – 45 rack spaces
3
11:07 AM
NetRunner ™ High Capacity
Vertical Cable Management System
Provides cost effective solutions that organize, manage, protect and showcase
network cabling while ensuring system performance and reliability. Optimal
compatibility with Panduit racks, patch panels, and connectivity provides a
complete end-to-end solution.
NRD12
• Dual Hinged Metal Door –
45 rack spaces
4
Page 10
2 Post Rack
R2P
84.0"H x 20.3"W x 3.0"D
45 rack spaces
aluminum
R2PS
84.0"H x 20.3"W x 3.0"D
45 rack spaces
steel
R2PW
84.0"H x 24.3"W x 3.0"D
45 rack spaces
2
2/9/2012
4
11
WMPV45ERTW
• Rack Top Trough with
Waterfall creates pathway
above rack
5
6
NREP
• End panel for NRV
NetRunner ™ High Capacity
Vertical Cable Managers
6
CMPH2
• 2 RU Open-Access™
Horizontal Cable Manager
D-rings
7
WMPH2E
7
• 2 RU PatchLink™ Horizontal
Cable Manager
8
8
NCMH2
• NetManager™ Horizontal
Cable Manager
9
NM2
9
• NetManager™ High Capacity
Horizontal Cable Manager
10
11
10 RFG6X8
• Cool Boot ® Raised Floor Air
Sealing Grommet
2
3
1
11 R2PPDUB
• Power Outlet Unit (POU)
bracket for 2 and 4 post racks
10
visit www.panduit.com
5
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
10:39 AM
Page 11
NetRunner ™ High Capacity Vertical Cable Managers
• Large finger openings accommodate up to 24 Category
6A cables
• Push button dual hinged doors ordered separately can be
opened 110° to the left or right to provide complete access
to the cables inside the vertical pathway
Part Number
• Snap-on cable retainers can be placed onto fingers to help
retain cables in channel during installation and maintenance
• Vertical managers include cable retainers, mounting brackets
and #12-24 screws
• For 2 post 3" channel racks and 4 post racks
Part Description
No. of
Rack
Spaces‡
Std.
Pkg.
Qty
High Capacity Dual Sided Vertical Managers
NRV6
Dimensions: 80.4"H x 6.7"W x 13.8"D
(2042mm x 170mm x 350mm).
45
1
NRV10
Dimensions: 80.4"H x 10.0"W x 13.8"D
(2042mm x 254mm x 350mm).
45
1
NRV12
Dimensions: 80.4"H x 12.0"W x 13.8"D
(2042mm x 305mm x 350mm).
45
1
High Capacity Single Sided Vertical Managers
NRVF6
Dimensions: 80.4"H x 6.7"W x 7.48"D
(2042mm x 170mm x 190mm).
45
1
NRVF10
Dimensions: 80.4"H x 10.0"W x 7.48"D
(2042mm x 254mm x 190mm).
45
1
NRVF12
Dimensions: 80.4"H x 12.0"W x 7.48"D
(2042mm x 305mm x 190mm).
45
1
High Capacity Dual Hinged Metal Doors
NRV
NRVF
NRD6
Dimensions: 82.8"H x 7.4"W x 1.6"D
(2104mm x 188mm x 40mm).
45
1
NRD10
Dimensions: 82.8"H x 10.7"W x 1.6"D
(2104mm x 272mm x 40mm).
45
1
NRD12
Dimensions: 82.8"H x 12.7"W x 1.6"D
(2104mm x 322mm x 40mm).
45
1
NRVCB
NetRunner ™ High Capacity Center Mount Bracket Kit.
For use with CEA-310-E standard 2 post and Panduit
4 Post Racks.
—
1
NREP
End panel for use with NRV series,
WMPVHCF45E / WMPVHC45E.
—
1
WMPV45ERTW
Rack top trough with waterfall door 2 post 3"
channel rack.
—
1
Accessories
‡One rack space = 1.75" (44.45mm).
All product color is black.
For NetRunner™ High Capacity Vertical Cable Manager Specifications, see page19.
NRD
NRVCB
NREP
WMPV45ERTW
visit www.panduit.com
11
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/9/2012
11:19 AM
Page 12
4 Post Cable Management Rack System
1
4 Post Rack
R4P36CN
Cage nut rails
84.0"H x 23.25"W x 36.0"D
45 rack spaces
R4P42CN
Cage nut rails
84.0"H x 23.25"W x 41.5"D
45 rack spaces
Deep 4 post open server racks provide the necessary environment for high density
server applications. The open design assures maximum ventilation while minimizing
air mixing in hot/cold aisle configurations. Space in the rear of the 4 post racks allows
for server power, cable management and patching, providing an efficient and functional
server solution.
1
3
2
R4PFP
• Vertical Blanking Panel
3
CVPDUB
• Vertical POU
Mounting Brackets
4
6
CVPPB
• Vertical Patch Panel
Mounting Bracket
5
RCSTR
• Caster set
6
R4PFL
4
• Vertical finger section for
cable management
5
4 Post Rack System configured for server application.
12
visit www.panduit.com
2
1
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
10:47 AM
Page 13
4 Post Cable Management Rack System and Accessories
• Offered in 23", 30", 36" and 42" depths
• Offered in 84" and 96" heights
• Fully adjustable rails can be adjusted after rack
is secured to floor
• Cage nut rails for server applications and tapped rails for
switch applications
• 2,500 lbs. (1134 kg) load rating, UL Listed
Part Number
Part Description
No. of
Rack
Spaces‡
Std.
Pkg.
Qty.
4 Post Rack Threaded Rail
R4P23*
Dimensions: 84.0"H x 23.25"W x 23.0"D
(2134mm x 591mm x 584mm).
45
1
R4P*
Dimensions: 84.0"H x 23.25"W x 30.0"D
(2134mm x 591mm x 762mm).
45
1
R4P36*
Dimensions: 84.0"H x 23.25"W x 36.0"D
(2134mm x 591mm x 914mm).
45
1
R4P42*
Dimensions: 84.0"H x 23.25"W x 41.5"D
(2134mm x 591mm x 1054mm).
45
1
—
1
1
1
1
1
1
1
45
1
4 Post Rack Accessories
R4P
R4PWF
R4PWF
RSHLF23
RSHLF
RSHLF36
RSHLF
CVPPB
R4PFP
RCSTR
4 post rack casters.
—
1
CVPPB
Bracket to vertically mount 1 RU EIA 19" copper and fiber
patch panels to the side of the Net-Access ™ Cabinet posts or
4 post racks.
Net-Access ™ Network Cabinet and 4 post rack end channel
slack spools. Package includes one left and one right slack
spool and mounting brackets.
Bracket for vertical POU mounting to the side of the
Net-Access ™ Cabinet posts or 4 post racks (kit of two).
—
1
—
1
—
1
R4PFL
Left vertical finger section for cable management.
11
1
R4PFR
Right vertical finger section for cable management.
11
1
R4PFM
Finger managers for 7 and 8 foot Panduit 4 Post Racks.
—
1
CNSPE
CNSPE
Top trough with waterfall creates pathway above rack.
Dimensions: 1.9"H x 26.1"W x 8.5"D
(50mm x 662mm x 216mm)
4 post rack mount shelf. Load rating 275 lbs.(124.7 kg).
Dimensions: 1.7"H x 19.0"W x 23.0"D
(44mm x 483mm x 584mm).
4 post rack mount shelf. Load rating 275 lbs. (124.7 kg).
Dimensions: 1.7"H x 19.0"W x 30.0"D
(44mm x 483mm x 762mm).
4 post rack mount shelf. Load rating 275 lbs. (124.7 kg).
Dimensions: 1.7"H x 19.0"W x 36.0"D
(44mm x 483mm x 914mm).
Adjustable vertical filler panel for Panduit 4 Post Racks
blocks by-pass air and directs cold airflow through equipment
when used.
CVPDUB
CVPDUB
Thermal Ducts for 4 Post Racks
R4PFM
R4PAE2
R4PAE1
Panduit 4 post rack thermal duct for use with Cisco^ 6509,
6509E, 6513, 9513 Director and Juniper 8208 switches.
—
1
R4PAE2
Panduit 4 post rack thermal ducting for use with Cisco^
7018 switch.
—
1
R4PAE3
Panduit 4 post rack thermal ducting for use with Cisco^ 7009
switch.
—
1
R4PAE1
R4PAE3
*For 7' 4 Post Rack Cage Nut Rail add suffix CN to the end of the part number, for example, R4P23CN.
NOTE: For 8' 4 Post Rack Threaded Rail, add suffix 96 to the end of the part number, for example, R4P2396. For 8' 4 Post
Rack Cage Nut, add suffix CN96 to the end of the part number, for example, R4P23CN96.
^Cisco is a registered trademark of Cisco Technology Inc.
**Juniper Networks and the Juniper Networks logo are registered trademarks of Juniper Networks, Inc. in the United States
and other countries.
‡One rack space = 1.75" (44.45mm).
All product color is black.
visit www.panduit.com
13
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
10:50 AM
Page 14
2 Post Rack System
• Offered in 84" (2134mm) and 96" (2441mm) versions for
both the three inch deep channel rack and six inch deep
channel rack
• Rack space identification is printed numbers up allowing
quick and easy equipment installation and identification
• Fully bonded structure
• 3" (76mm) deep channel,1000 lb. (454 kg) load rating,
UL listed
• 6" (152mm) deep channel, 1500 lb. (680 kg) load rating,
UL listed
• Perforated rails for cable access and side-to-side airflow
switches [6" (152mm) depth only]
Part Number
Part Description
No. of
Rack
Spaces‡
Std.
Pkg.
Qty.
45
1
52
1
45
1
45
1
24
1
—
100
45
1
52
1
—
1
3" Deep Channel Rack
R2P
R2P96
R2PS
R2PW
R2P48
R2P
R2P6S
S1224-C
19" EIA rack, aluminum.
Dimensions: 84.0"H x 20.3"W x
(2134mm x 514mm x 76mm).
19" EIA rack, aluminum.
Dimensions: 96.0"H x 20.3"W x
(2134mm x 514mm x 76mm).
19" EIA rack, steel.
Dimensions: 84.0"H x 20.3"W x
(2134mm x 514mm x 76mm).
23" EIA rack, aluminum.
Dimensions: 84.0"H x 24.3"W x
(2134mm x 616mm x 76mm).
19" EIA rack, aluminum.
Dimensions: 48.0"H x 20.3"W x
(1219mm x 514mm x 76mm).
#12-24 x .5" mounting screws.
3.0"D
3.0"D
3.0"D
3.0"D
3.0"D
6" Deep Channel Rack
R2P6S
R2P6S96
R2PPEVWF
R2PPEVWF
19" EIA rack, 6" channel, steel.
Dimensions: 84.0"H x 20.3"W x 6"D
(2134mm x 514mm x 152mm).
19" EIA rack, 6" channel, steel.
Dimensions: 96.0"H x 20.3"W x 6"D
(2438mm x 514mm x 152mm).
Waterfall Trough for 2 Post Rack and PatchRunner ™
High Capacity Vertical Cable Managers.
Thermal Duct for 2 Post Racks
R2PAE2
R2PAE1
R2PAE1
2 post rack thermal duct for use with Cisco^ 6509 and
6509E Catalyst switches.
—
1
R2PAE2
2 post rack thermal duct for use with Cisco^
7009 switch.
—
1
RFAKIT
Rack anchor kit for concrete floor (set of four).
—
1
R2PPDUB
Power Outlet Unit (POU) bracket for 2 and 4 post
racks (set of two).
—
1
Accessories
R2PPDUB
‡One rack space = 1.75" (44.45mm).
^Cisco is a registered trademark of Cisco Technology Inc..
All product color is black.
14
visit www.panduit.com
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
10:53 AM
Page 15
High Capacity Horizontal Cable Management Systems
NetManager ™ High Capacity Horizontal Cable Managers
• Innovative inset fingers slope inward toward back of
managers offering unobstructed access to network cabling
for easier moves, adds, and changes
• Large front finger openings easily accommodate Category
6A and Category 6 cables, speeding installation and
reducing maintenance costs
• Rear cable management finger spacing utilizes open
D-rings for greater accessibility
• Can be used to create large capacity horizontal pathways
for routing cable
• Front and rear dual hinged cover allows cable
access without removing cover
• Built in cable retainers hold cable in place for easy moves,
adds, and changes
Cable Capacity
Part Number
Part Description
Cat.6A
Cat.6
No. of
(0.300") (0.240")
Rack
Spaces‡
Front/Rear
Std.
Pkg.
Qty.
19" High Capacity Manager, Front and Rear
NM2
NM1
1 RU. 1.7"H x 19.0"W x 13.1"D (44mm x 482mm x 332mm).
1
18/18
30/30
1
NM2
2 RU. 3.5"H x 19.0"W x 13.1"D (88mm x 482mm x 332mm).
2
NM3
3 RU. 5.2"H x 19.0"W x 13.1"D (133mm x 482mm x 332mm).
3
54/54
84/84
1
90/90
144/144
1
NM4
4 RU. 7.0"H x 19.0"W x 13.1"D (177mm x 482mm x 332mm).
4
132/132 210/210
1
19" High Capacity Manager, Front Only
NMF2
NMF1
1 RU. 1.7"H x 19.0"W x 6.2"D (44mm x 482mm x 157mm).
1
18
30
1
NMF2
2 RU. 3.5"H x 19.0"W x 6.2"D (88mm x 482mm x 157mm).
2
54
84
1
NMF3
3 RU. 5.2"H x 19.0"W x 6.2"D (133mm x 482mm x 157mm).
3
90
144
1
NMF4
4 RU. 7.0"H x 19.0"W x 6.2"D (177mm x 482mm x 157mm).
4
132
210
1
NM1B
Front to rear pass through blanking panel for NetManager ™
High Capacity Horizontal Cable Managers, NM1 and NMF1.
—
—
—
1
NM2B
Front to rear pass through blanking panel for NetManager ™
High Capacity Horizontal Cable Managers, NM2 and NMF2.
—
—
—
1
NM3B
Front to rear pass through blanking panel for NetManager ™
High Capacity Horizontal Cable Managers, NM3 and NMF3.
—
—
—
1
NM4B
Front to rear pass through blanking panel for NetManager ™
High Capacity Horizontal Cable Managers, NM4 and NMF4.
—
—
—
1
Accessories
NMF3
NMF4
Capacities are based on a fill ratio of 40% to accommodate proper cable routing techniques. For 50% fill ratio, multiply by 1.25.
Multiply Category 6A capacity by 1.5 for fill ratio when using Panduit® Category 6A-SD cable.
‡One rack space = 1.75" (44.45mm).
All product color is black.
PatchRunner ™ High Capacity Horizontal Cable Managers
• Adjustable depth for pathway utilization or fan avoidance
cable crossover
• Manage cables on switches with vertical cards
• Can be used to create cable pathways for routing cable
• Steel hinged cover provides easy access to pathway
Part Number
Part Description
PEHF2
3.5"H x 18.9"W x 9.8"D*(89mm x 480mm x 250mm*)
PEHF
Cable Capacity
Cat6.A
Cat.6
No. of
(0.300") (0.240")
Rack
Spaces‡
Front/Rear
2
92
143
Std.
Pkg.
Qty.
1
PEHF3
5.2"H x 18.9"W x 9.8"D* (133mm x 480mm x 250mm*)
3
166
259
1
PEHF4
7.0"H x 18.9"W x 9.8"D* (177mm x 480mm x 250mm*)
4
240
375
1
*Depth can telescope from rack mounting face 4.4" (112mm) to 7.6" (193mm).
Capacities are based on a fill ratio of 40% to accommodate proper cable routing techniques. For 50% fill ratio, multiply by 1.25.
Multiply Category 6A capacity by 1.5 for fill ratio when using Panduit® Category 6A-SD cable.
‡One rack space = 1.75" (44.45mm).
All product color is black.
visit www.panduit.com
15
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
10:57 AM
Page 16
Horizontal Cable Management Systems
PatchLink ™ Horizontal Cable Managers
• Dual hinged cover allows cable access without
removing cover
• Rounded edges on fingers protect cables from snags and
damage to cable
•
•
•
•
Flexible fingers allow easy installation and removal of cables
Pass-through holes allow front to rear cabling
Covers, #12-24 and M6 mounting screws included
Bulk package options minimize packaging on-site
Cable Capacity
WMPSE
Part Number
No. of
Rack
Spaces‡
Part Description
Cat.6
(0.240")
Cat.5e
(0.225")
Front/Rear
Std.
Pkg.
Qty.
19" Manager, Front and Rear
WMP1E
WMPSE
WMPSE-X
WMPLSE
WMP1E
WMP1E-V
WMPH2E
WMPFSE
1.7"H x 19.0"W x 8.9"D (44mm x 483mm x 226mm).
1.7"H x 19.0"W x 7.9"D (44mm x 483mm x 200mm).
3.5"H x 19.0"W x 8.9"D (89mm x 483mm x 226mm).
3.5"H x 20.2"W x 8.9"D (89mm x 513mm x 226mm).
Includes extended front covers and two bend radius
clips.
1
1
1
2
2
2
24/25
30/44
12/13
60/79
16/44
66/90
60/59
66/66
24
30
12
60
16
66
60
66
1
10
1
1
5
1
19" Manager, Front Only
WMPF1E
WMPFSE
WMPFSE-E
WMPLFSE
WMPF1E
WMPF1E-X
WMPHF2E
1.7"H x 19.0"W x 3.7"D (44mm x 483mm x 94mm).
1.7"H x 19.0"W x 2.7"D (44mm x 483mm x 69mm).
3.5"H x 19.0"W x 3.7"D (89mm x 483mm x 94mm).
3.5"H x 20.2"W x 3.7"D (89mm x 573mm x 94mm).
Includes extended front covers and two bend
radius clips.
1
1
1
2
2
2
1
20
1
1
10
1
Capacities are based on fill ratio of 40% to accommodate proper cable routing techniques. For 50% fill ratio, multiply by 1.25.
‡One rack space = 1.75" (44.45mm).
All product color is black.
NetManager ™ Horizontal Cable Managers
• Removable front cover hinges 180° up or down to allow
access without removing cover
• Pass-through holes allow for front to rear cabling
• Built in cable retainers hold cable in place for easy moves,
adds, and changes
• Covers, #12-24 and M6 mounting screws included
• Curved finger surfaces designed to maintain bend radius
for fiber and copper
Cable Capacity
Part Number
Part Description
No. of
Rack
Spaces‡
Cat.6
(0.240")
Cat.5e
Fiber
(0.225")
(3mm)
Front/Rear
2
54/66
60/78
220/352
1
Std.
Pkg.
Qty.
19" Manager, Front and Rear
NCMH2
NCMH2
3.5"H x 19.0"W x 9.8"D
(88mm x 483mm x 248mm).
Snap-on rear cover.
19" Manager, Front Only
NCMHF1
1.7"H x 19.0"W x 3.7"D
(44mm x 483mm x 95mm).
1
24
24
88
1
NCMHF2
3.5"H x 19.0"W x 3.7"D
(88mm x 483mm x 95mm).
2
54
60
220
1
NCMHF1
Capacities are based on a fill ratio of 40% to accommodate proper cable routing techniques. For 50% fill ratio, multiply by 1.25.
‡One rack space = 1.75" (44.45mm).
All product color is black.
16
visit www.panduit.com
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
11:01 AM
Page 17
Horizontal Cable Management Systems
Open-Access™ Horizontal Cable Managers
• D-ring managers provide an open and efficient way to
manage power, coaxial, and communications cables
• Optional snap-on cover
• Optional front and rear managers
• Pass-through holes allow front to rear cabling
• Hardware included
Cable Capacity
CMPHF1
Part Number
Part Description
No. of
Rack
Spaces‡
Cat.6
(0.240")
Cat.5e
(0.225")
Std.
Pkg.
Qty.
19" Manager, Front Only
CMPHHF1
CMPHF2
CMPHF1
1.7"H x 19.0"W x 3.4"D (44mm x 483mm x 87mm).
1
24
24
1
CMPHHF1
1.7"H x 19.0"W x 5.7"D (44mm x 483mm x 144mm).
1
24
30
1
CMPHF2
3.5"H x 19.0"W x 3.4"D (88mm x 483mm x 87mm).
2
54
60
1
CMPHH2
3.5"H x 19.0"W x 5.7"D (88mm x 483mm x 144mm).
2
96
108
1
Capacities are based on a fill ratio of 40% to accommodate proper cable routing techniques. For 50% fill ratio, multiply by 1.25.
‡One rack space = 1.75" (44.45mm).
All product color is black.
CMPHH2
Rack Mount Shelves for 2 Post Racks
• Load ratings up to 250 lbs.; refer to part descriptions for specific load ratings
SRM19FM2
No. of
Rack
Spaces‡
1
Std.
Pkg.
Qty.
1
Part Number
SRM19FM1
Part Description
19" front mount shelf, steel. Dimensions: 1.7"H x 19.0"W x 15.2"D
(44mm x 483mm x 385mm). Load rating 30 lbs. (13.6 kg).
SRM19FM2
19" front mount shelf, steel. Dimensions: 3.5"H x 19.0"W x 15.2"D
(88mm x 483mm x 385mm). Load rating 50 lbs. (22.7 kg).
2
1
SRM19CMV3
19" cantilevered shelf, vented aluminum. Includes two-piece shelf that
mounts to front and back of EIA racks. Dimensions: 5.2"H x 19.2"W x 12.5"D
(133mm x 489mm x 316mm). Load rating 200 lbs. (90.9 kg).
19" cantilevered shelf, aluminum. Includes two-piece shelf that mounts to
front and back of EIA racks. Dimensions: 5.2"H x 19.2"W x 12.5"D
(133mm x 489mm x 316mm). Load rating 200 lbs. (90.9 kg).
19" adjustable mount shelf, steel, mounts to front and back of EIA racks.
Dimensions: 1.8"H x 19.0"W x 18.0"D (44mm x 483mm x 457mm).
Load rating 250 lbs. (113.6 kg).
19" adjustable mount shelf, steel, mounts to front and back of EIA racks.
Dimensions: 1.8"H x 19.0"W x 25.0"D (44mm x 483mm x 635mm).
Load rating 250 lbs. (113.6 kg).
3
1
3
1
1
1
1
1
No. of
Rack
Spaces‡
1
Std.
Pkg.
Qty.
5
SRM19CM3
SRM19CMV3
SRM19X18A1
SRM19X25A1
SRM19X18A1
‡One rack space = 1.75" (44.45mm).
All product color is black.
Tool-Less Blanking Panels
• Minimize bypass airflow in racks and cabinets while providing an aesthetic appearance
TLBP1
TLBP2
Part Number
TLBP1S-V
Part Description
19" (483mm) width for 3/8" cage nut holes.
TLBP2S-V
19" (483mm) width for 3/8" cage nut holes.
2
5
TLBP1R-V
19" (483mm) width for tapped rails.
1
5
TLBP2R-V
19" (483mm) width for tapped rails.
2
5
‡One rack space = 1.75" (44.45mm).
All product color is black.
visit www.panduit.com
17
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/9/2012
11:27 AM
Page 18
PatchRunner™ High Capacity Vertical Cable Manager
Specifications
• Dual-sided cable managers, having 60% of total cable
capacity on one side and 40% on the other, allow optimized
capacity placement on either side of the rack
• Cable managers have multiple mounting locations to the
side of the rack, allowing optimal cable routing and
space utilization
• When using a dual-sided cable manager in an inter-connect
network architecture, the 60% side of the cable manager
can be orientated towards the patching side of the rack to
manage a higher number of patch cords
• When using a dual-sided cable manager in a cross-connect
network architecture, the 60% side of the cable manager can
be orientated towards the cabling side of the rack to manage
a higher number of cables
60% Capacity Channel
RU Capacity
40% Capacity Channel
Channel
Area Cat.6A-SD Cat.6A Cat.6 Cat.5e Area Cat.6A-SD Cat.6A Cat.6 Cat.5e
(0.240") (0.300") (0.240") (0.225") (In.2) (0.240") (0.300") (0.240") (0.225")
(In.2)
Part Number
Total
605
46.2
—
357
—
228
—
357
—
406
—
3 rows of 2 RU
6
733
834
65
—
501
—
320
—
501
—
570
—
3 rows of 3 RU
9
599
936
1065
83.4
—
644
—
412
—
644
—
733
—
3 rows of 4 RU
12
728
1137
1294
102
—
789
—
505
—
789
—
897
—
PEV6 (dual-sided)
PEVF6 (single-sided)
64.8
531
340
531
PEV8 (dual-sided)
PEVF8 (single-sided)
83.4
733
469
PEV10 (dual-sided)
PEVF10 (single-sided)
121
936
PEV12 (dual-sided)
PEVF12 (single-sided)
147
1137
3 rows of 6 RU 12/18
(6 with limited depth)
*Capacities are based on a fill ratio of 35% to accommodate proper cable routing techniques. For 50% fill ratio, multiply by 1.5.
Multiply Category 6A capacity by 1.5 for fill ratio when using Panduit Category 6A-SD cable.
All dimensions represent typical outer cable diameter in inches (mm).
1.25
TYP
For Horizontal Dimensions:
6" Vertical Manager dimensions shown in brackets […]
8" Vertical Manager dimensions shown in parenthesis (…)
10" Vertical Manager dimensions shown in Asterisk*…*
3.5 TYP
4 Post Rack
For Vertical Dimensions:
23" Deep 4 Post Rack dimensions shown in brackets […]
36" Deep 4 Post Rack dimensions shown in parenthesis (…)
42" Deep 4 Post Rack dimensions shown in Asterisk*…*
[35.0]
42.0
(48.0)
*53.5*
[23.0]
30.0
(36.0)
*41.5*
*
40% OF
CAPACITY
17.7 STD. MOUNTING
TO FRONT FACE OF RACK (SHOWN)
12.9 FULLY EXTENDED
*
60% OF
CAPACITY
10.0 STD. MOUNTING
TO FRONT FACE OF RACK (SHOWN)
14.8 FULLY EXTENDED
[6.0]
(8.0)
*10.0*
12.0
23.25
2 Post Rack
2.1 TYP
13.0 FULLY EXTENDED
17.8 STD. MOUNTING
TO FRONT FACE OF RACK
(SHOWN)
1.25
TYP
1.25
TYP
*
2.1 TYP
40% OF
CAPACITY
12.00
13.0 FULLY EXTENDED
17.8 STD. MOUNTING
TO FRONT FACE OF RACK
(SHOWN)
9.00
6.00
3.00
*
10.0 STD. MOUNTING
TO FRONT FACE OF RACK
(SHOWN)
14.8 FULLY EXTENDED
60% OF
CAPACITY
6.00
20.31 = 19 RACK TYP
24.31 = 23 RACK TYP
18
visit www.panduit.com
[6.0]
(8.0)
*10.0*
12.0
6.00
10.0 STD. MOUNTING
TO FRONT FACE OF RACK
(SHOWN)
14.8 FULLY EXTENDED
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
11:05 AM
Page 19
NetRunner™ High Capacity Vertical Cable Manager
Specifications
• NetRunner™ High Capacity Vertical Cable Managers are
specifically designed for cable capacities typically found in
telecommunication rooms using medium to large
enterprise switches
Capacity Chart
Front Channel with Slack Spool
• Optional strain relief bars can be mounted vertically inside
the cable managers to create distinct pathways to better
manage multiple types of network media
Front Channel with No Slack Spool
Cable Capacity*
Rear Channel
Cable Capacity*
Cable Capacity*
Cat.6ACat.6ACat.6ASD Cat.6A Ca.t6 Cat.5e Channel
SD Cat.6A Cat.6 Cat.5e Channel
SD Cat.6A Cat.6 Cat.5e
Channel
2
2
2
Area (In ) (0.240") (0.300") (0.240") (0.225") Area (In ) (0.240") (0.300") (0.240") (0.225") Area (In ) (0.240") (0.300") (0.240") (0.225")
Part Number
NRV6 (front/rear)
23.3
180
115
180
205
32.9
254
163
254
289
32.9
254
163
254
289
NRVF6 (front only)
23.3
180
115
180
205
32.9
254
163
254
289
—
—
—
—
—
NRV10 (front/rear)
42.8
331
212
331
377
52.4
406
260
406
461
52.4
406
260
461
461
NRVF10 (front/only)
42.8
331
212
331
377
52.4
406
260
406
461
—
—
—
—
—
NRV12 (front/rear)
54.6
422
270
422
481
64.2
497
318
497
565
64.2
497
318
565
565
NRVF12 (front only)
54.6
422
270
422
481
64.2
497
318
497
565
—
—
—
—
—
*Capacities are based on a fill ratio of 35% to accommodate proper cable routing techniques. For 50% fill ratio, multiply by 1.5.
Multiply Category 6A capacity by 1.5 for fill ratio when using Panduit Category 6A-SD cable.
All dimensions represent typical outer cable diameter in inches (mm).
1.25
TYP
3.5 TYP
For Horizontal Dimensions:
6" Vertical Manager dimensions shown in brackets […]
10" Vertical Manager dimensions shown in Asterisk*…*
For Vertical Dimensions:
23" Deep 4 Post Rack dimensions shown in brackets [...]
36" Deep 4 Post Rack dimensions shown in parenthesis (...)
42" Deep 4 Post Rack dimensions shown in asterisk *...*
4 Post Rack
[35.0]
42.0
(48.0)
*53.5*
[23.0]
30.0
(36.0)
*41.5*
15.0
DUAL SIDED
6.6
TO FRONT FACE
OF RACK
[6.7]
*10.0*
12.0
23.25
1.25
TYP
2 Post Rack
15.0
8.5
SINGLE SIDED
2.1 TYP
16.2
DUAL SIDED
3.00
6.6
TO FRONT FACE
OF RACK
20.31 = 19 RACK
24.31 = 23 RACK
8.5
SINGLE SIDED
[6.7]
*10.0*
12.0
visit www.panduit.com
19
SA-RKCB15 (Space Saving CableMgmt Brochure).qxp
2/6/2012
11:27 AM
Page 20
Real-World Solutions
With a proven reputation for excellence and innovation, Panduit and our partners
work with you to overcome challenges and implement real-world solutions that
create a competitive business advantage. Panduit offers the broadest range of
solutions, from data centers and intelligent buildings to manufacturing operations,
to help you build a smarter, unified business foundation.
Technology Leadership
Panduit develops innovative physical infrastructure solutions that meet the
rapidly changing needs of our clients, from hardware and software to advisory
services. This commitment is supported by investment in advanced research,
solutions-focused product development, world-class manufacturing, and
collaboration with customers at the forefront of technology.
Transform Your
Physical Infrastructure
Partner Ecosystem
Our best-in-class partner ecosystem offers a comprehensive portfolio of services
that span the project lifecycle, from planning and design to delivery, deployment,
Call or visit us online,
we can show you how.
maintenance, and operation. Panduit business partners – distributors, and certified
Panduit Corp.
architects, consultants, engineers, designers, system integrators, and contractors –
World Headquarters
are qualified to help you achieve your objectives and realize predictable and
measurable results.
Strategic Alliances
Panduit cultivates long-term strategic alliances with industry leaders, including
Cisco Systems, EMC, IBM, and Rockwell Automation, to develop, optimize, and
validate solutions for our customers. This investment in people and resources
helps solve our customers’ greatest business challenges.
Global Business Commitment
Panduit is committed to delivering a consistently high level of quality and service
the world over. With a presence in more than 100 countries, local Panduit sales
representatives and technical specialists offer guidance and support that bring
value to your business. Our global supply chain, which includes manufacturing,
customer service, logistics, and distribution partners, provides prompt response
to your inquiries and streamlines delivery to any worldwide destination.
Sustainability
With a commitment to environmental sustainability, Panduit develops and
implements solutions that protect, replenish, and restore the world in which
we live. This commitment is demonstrated by Panduit’s LEED Gold certified
World Headquarters, leveraging the Unified Physical InfrastructureSM approach
to enable convergence of critical building systems to drive energy efficiency
and ongoing operational improvement.
©2012 Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. SA-RKCB15 REPLACES SA-RKCB09 2/2012
Tinley Park, IL 60487
[email protected]
US and Canada: 800.777.3300
Europe, Middle East, and Africa:
44.20.8601.7200
Latin America: 52.33.3777.6000
Asia Pacific: 65.6305.7575
www.panduit.com