Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74AHC86
CMOS IC
QUADRUPLE 2-INPUT
EXCLUSIVE-OR GATES

DESCRIPTION
The
U74AHC86
device
is
quadruple
2-input
EXCLUSIVE-OR gate which perform the function Y=A  B
or Y = A B+ A B .

FEATURES
* Operate from 2V to 5.5V
* Max tpd of 8.8ns at 5.0V
* Low Quiescent Current: ICC=2μA(Max) at TA=25℃

ORDERING INFORMATION
Ordering Number
U74AHC86G-S14-R
U74AHC86G-P14-R

Package
SOP-14
TSSOP-14
Packing
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-640.B
U74AHC86


CMOS IC
PIN CONFIGURATION
1A
1
14
VCC
1B
2
13
4B
1Y
3
12
4A
2A
4
11
4Y
2B
5
10
3B
2Y
6
9
3A
GND
7
8
3Y
FUNCTION TABLE
INPUT(nA)
INPUT(nB)
H
H
H
L
L
H
L
L
Note: H: High voltage level; L: Low voltage level

OUTPUT(nY)
L
H
H
L
LOGIC SYMBOL
Logic symbol
IEC logic symbol
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R502-640.B
U74AHC86

CMOS IC
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage
VCC
-0.5 ~ +7
V
Input Voltage
VIN
-0.5 ~ +7
V
Output Voltage
VOUT
-0.5 ~ VCC +0.5
V
VCC or GND Current
ICC
±50
mA
Output Current
IOUT
±25
mA
Input Clamp Current
IIK
-20
mA
Output Clamp Current
IOK
±20
mA
Storage Temperature
TSTG
-65 ~ + 150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

RECOMMENDED OPERATING CONDITIONS (TA=25°C, unless otherwise specified)
PARAMETER
Supply Voltage
Input Voltage
Output Voltage
Input Transition Rise or Fall Rate
Operating Temperature

SYMBOL
VCC
VIN
VOUT
t/v
MIN
2.0
0
0
TYP
5.0
VCC=3.3±0.3V
VCC=5.0±0.5V
TA
-40
+25
MAX
5.5
5.5
VCC
100
20
+85
UNIT
V
V
V
ns/V
°C
THERMAL DATA
PARAMETER
Junction to Ambient

CONDITIONS
SYMBOL
SOP-14
TSSOP-14
θJA
RATINGS
86
113
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
High-Level Input Voltage
VIH
Low-Level Input Voltage
VIL
High-Level Output Voltage
VOH
Low-Level Output Voltage
VOL
Input Leakage Current
Quiescent Supply Current
Input Capacitance
II(LEAK)
ICC
CIN
TEST CONDITIONS
VCC =2.0V
VCC =3.0V
VCC =5.5V
VCC =2.0V
VCC =3.0V
VCC =5.5V
VCC=2V, IOH=-50μA
VCC=3V, IOH=-50μA
VCC=4.5V, IOH=-50μA
VCC=3V, IOH=-4mA
VCC=4.5V, IOH=-8mA
VCC=2V, IOL=50μA
VCC=3V, IOL=50μA
VCC=4.5V, IOL=50μA
VCC=3V, IOL=4mA
VCC=4.5V, IOL=8mA
VIN=5.5V or GND,VCC =0V to 5.5V
VIN=VCC or GND,IOUT=0,VCC =5.5V
VIN=VCC or GND
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
1.5
2.1
3.85
TYP
MAX
V
0.5
0.9
1.65
1.9
2.9
4.4
2.58
3.94
UNIT
2
3
4.5
4
V
V
0.1
0.1
0.1
0.36
0.36
0.1
2
10
V
μA
μA
pF
3 of 5
QW-R502-640.B
U74AHC86

SWITCHING CHARACTERISTICS (TA=25°C, see TEST CIRCUIT AND WAVEFORMS)
PARAMETER
Propagation delay from input
(A or B) to output(Y)

CMOS IC
SYMBOL
tPLH
tPHL
TEST CONDITION
CL= 15 pF
VCC =3.3V±0.3V
CL= 50 pF
CL= 15 pF
VCC =5.0V±0.5V
CL= 50 pF
MIN
TYP
7
9.5
4.8
6.3
MAX
11
14.5
6.8
8.8
UNIT
TYP
18
MAX
UNIT
pF
Ns
Ns
OPERATING CHARACTERISTICS (TA=25°С, unless otherwise specified)
PARAMETER
Power Dissipation Capacitance
SYMBOL
CPD
TEST CONDITION
No load, f=1MHz
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
4 of 5
QW-R502-640.B
U74AHC86

CMOS IC
TEST CIRCUIT AND WAVEFORMS
Output
CL
Load Circuit for Totem-Pole Outputs
VCC
V
50%
50%
0V
tPLH
Vo
tPHL
VOH
50%
50%
VOL
Propagation Delay Times
Note: CL includes probe and jig capacitance.
PRR ≤1MHz, Zo = 50Ω, tR ≤3ns, tF≤3ns.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-640.B