QuickNet™ PanMPO™ and MPO Small Diameter Trunk Cable Assemblies S P E C I F I C AT I O N S H E E T technical information PanMPO™ Trunk Assemblies are pre-terminated 12-fiber and 24-fiber cable assemblies. The unique design of the PanMPO™ Connector allows for rapid gender and polarity change in the field and enables a seamless, standards-compliant cable plant migration from duplex based applications (e.g. 10G Ethernet) to parallel optics based applications (e.g. 40/100G Ethernet). These small diameter trunk cable assemblies optimize cable routing requirements to ensure efficient use of pathway space and significantly reduce installation time and cost. All trunk cable assemblies are factory terminated and tested to deliver verified optical performance and reliability for improved network integrity. application High speed fiber backbone or permanent link when mated to QuickNet™ Cassettes or fiber adapter panels paired with MPO to LC breakout harnesses. Method A and Method B TIA-568-C compliant for 40G/100G parallel optics multimode applications. Allows system designers to tailor configuration, reach and breakout construction to application requirements; to minimize waste, optimize cable management, speed deployment, improve flexibility and manageability for lower installation costs. Small diameter trunk cable assemblies use 30 – 40% less space which is ideal for high cable density applications. construction physical properties Cable type: Indoor Small Diameter Trunk Cable outside diameter (OD): Cable jacket ratings: Optical Fiber Non-conductive Plenum (OFNP) Low Smoke Zero Halogen (LSZH) 12-fiber: 24-fiber: Minimum bend radius: 30mm Fiber types: Multimode: Singlemode: Cable tensile strength: 12-fiber: 24-fiber: Connector types end ‘A’: PanMPO™ Female PanMPO™ Male LC duplex (12F only) MPO (singlemode) Cable compressive load: 10 N/mm Flex: 100 cycles at 4.9N Connector cable retention: 50N Connector durability: 500 mating cycles* Breakout outside diameter: 3.0mm Transition outside diameter: 12-fiber: 24-fiber: 10mm 10mm Pulling eye diameter: 12-fiber: 24-fiber: 19mm 23mm Twist: 10 cycles at 15N Breakout length: 1m Connector types end 'B': OM3 50/125μm OM4 50/125μm OS2 9/125um PanMPO™ Female PanMPO™ Male LC duplex (12F only) MPO (singlemode) Fiber count: 12 and 24 Jacket color: OM3: OM4: OS2: Aqua Aqua Yellow 4.5mm 5.4mm 440N 660N optical properties environmental properties Maximum cable attenuation: Multimode: 3.5dB/km at 850nm 1.5dB/km at 1300nm Operating temperature: 0°C to +70°C Singlemode Standard IL: Mulitmode Optimized IL: Multimode Ultra Low IL: Storage and shipping temperature: -40°C to +70°C Maximum connector insertion loss (per mated pair): 0.5dB Installation temperature: -0°C to +60°C 0.25dB Minimum connector return loss: Multimode: Singlemode: OM3 30dB minimum OM4 30dB minimum OS2 50db minimum *With proper cleaning and inspection w w w. p a n d u it.c o m 0.35dB standards Meets or exceeds: ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1, GR-409-CORE, ICEA S-83-596 RoHS Complaint QuickNet™ PanMPO™ and MPO Small Diameter Trunk Cable Assemblies part number Example: FXUYL7E7EAAM030 = OM3, 24-fiber, indoor small diameter trunk cable, LSZH, PanMPO™ Female to PanMPO™ Female, polarity A, pulling eye, 30 meters. CHARACTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 EXAMPLE F X U Y P 7 5 7 5 X N F 0 3 0 1 – Fiber 6 7 8 9 F = Fiber 2 – Fiber Type 9 = OS2 9/125um X = OM3 50/125µm Z = OM4 50/125µm 3 – Fiber Count T = 12 fiber U = 24 fiber 4 – Cable Type Y = Indoor small diameter trunk cable 5 – Jacket Type L = Low Smoke Zero Halogen (LSZH) P = Plenum (OFNP) 10 – Construction/Performance A = Singlemode Polarity A - Standard IL X = Multimode Polarity A - Optimized IL Y = Multimode Polarity B - Optimized IL K = Multimode Polarity A - Ultra Low IL L = Multimode Polarity B - Ultra Low IL 11 – Other N = No pulling eye (15 - 100ft, 5 - 30m) A = Pulling eye end A (>100ft, > 30m) 12 – Unit of Length F = Feet (OFNP) M = Meters (LSZH) 13, 14, 15 – Cable Assembly Length 015 - 300ft 1ft increments to 100ft, 5ft increments to 300ft 005 – 100m, 1m increments – Connector Type (End 'A') 5 = Singlemode MPO Female 6 = Singlemode MPO Male 7 = Multimode PanMPO Female 8 = Multimode PanMPO Male – Connector Variant (End 'A') 5 = 39" Breakout with transition – Connector Type (End 'B') 5 = Singlemode MPO Female 6 = Singlemode MPO Male 7 = Multimode PanMPO Female 8 = Multimode PanMPO Male – Connector Variant (End 'B') 5 = 39" Breakout with transition Small diameter trunk cable assembly detaIl Key Up Key Up Male Female Key Down Key Down Male Female 24-Fiber Trunk Overall Length Between Connectors [1 meter] 12-Fiber Female MPO Connector 12-Fiber Trunk [1 meter] 12-Fiber Female MPO Connector Overall Length Between Connectors [1 meter] 12-Fiber Female MPO Connector [1 meter] 12-Fiber Female MPO Connector Please contact Panduit customer service for information on additional part number options. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. FBSP94--WW-ENG 11/2015