QuickNet™ PanMPO™ Small Diameter Trunk Cable Assemblies S P E C I F I C AT I O N S H E E T technical information PanMPO™ Trunk Assemblies are pre-terminated 12-fiber and 24-fiber cable assemblies. The unique design of the PanMPO™ Connector allows for rapid gender and polarity change in the field, in support of standards-compliant cable plant migration from 10G cassette-based systems to 40G MPO connector-based parallel optics cable plant. These trunk cable assemblies optimize cable routing requirements to ensure efficient use of pathway space and significantly reduce installation time and cost. All small diameter trunk cable assemblies are factory terminated and tested to deliver verified optical performance and reliability for improved network integrity. 10Gig versions provide 10 Gb/s network performance up to 300 meters for OM3 and up to 550 meters for OM4 per IEEE 802.3ae 10 GbE standard while maintaining compatibility with legacy systems. application 10G fiber backbone or permanent link when mated to QuickNet™ Cassettes or fiber adapter panels paired with MPO to LC breakout harnesses. Method A and Method B TIA-568-C compliant for 40G parallel optics multimode applications. Allows system designers to tailor configuration, reach and breakout construction to application requirements; to minimize waste, optimize cable management, speed deployment, improve flexibility and manageability for lower installation costs. Small diameter trunk cable assemblies use 30 – 40% less space which is ideal for high cable density applications. construction physical properties Cable type: Indoor Small Diameter Trunk Cable outside diameter (OD): Cable jacket ratings: Optical Fiber Non-conductive Plenum (OFNP) Low Smoke Zero Halogen (LSZH) 12-fiber: 24-fiber: Minimum bend radius: 30mm Fiber types: Multimode: Cable tensile strength: 12-fiber: 24-fiber: Connector types end ‘A’: PanMPO™ Female PanMPO™ Male LC duplex (12F only) Cable compressive load: 10 N/mm Flex: 100 cycles at 4.9N Connector types end 'B': PanMPO™ Female PanMPO™ Male LC duplex (12F only) Connector cable retention: 50N Connector durability: 500 mating cycles* Fiber count: 12 and 24 Breakout outside diameter: 3.0mm Jacket color: OM3: OM4: Transition outside diameter: 12-fiber: 24-fiber: 10mm 10mm Pulling eye diameter: 12-fiber: 24-fiber: 19mm 23mm Twist: 10 cycles at 15N Breakout length: 1m OM3 50/125µm OM4 50/125µm Aqua Aqua 4.5mm 5.4mm 440N 660N optical properties environmental properties Maximum cable attenuation: Multimode: 3.5dB/km at 850nm 1.5dB/km at 1300nm Operating temperature: 0°C to +70°C Standard IL: Optimized IL: 0.50dB 0.35dB Storage and shipping temperature: -40°C to +70°C Maximum connector insertion loss (per mated pair): Installation temperature: -0°C to +60°C Minimum connector return loss: Multimode: OM3 30dB minimum OM4 30dB minimum *With proper cleaning and inspection www.panduit.com standards Meets or exceeds: ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1, GR-409-CORE, ICEA S-83-596 RoHS Complaint QuickNet™ PanMPO™ Small Diameter Trunk Cable Assemblies part number Example: FXUYL7E7EAAM030 = OM3, 24-fiber, indoor small diameter trunk cable, LSZH, PanMPO™ Female to PanMPO™ Female, polarity A, pulling eye, 30 meters. CHARACTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 EXAMPLE F X U Y L 7 E 7 E A A M 0 3 0 6 – Connector Type (End 'A') 7 = PanMPO™ Female 8 = PanMPO™ Male L = LC duplex (12F only) 7 – Connector Variant (End 'A') E = 1m breakout 8 – Connector Type (End 'B') 7 = PanMPO™ Female 8 = PanMPO™ Male L = LC duplex (12F only) 9 – Connector Variant (End 'B') E = 1m breakout 10 – Construction/Performance A = Polarity A – standard IL B = Polarity B – standard IL X = Polarity A – optimized IL Y = Polarity B – optimized IL 1 – Fiber F = Fiber 2 – Fiber Type X = OM3 50/125µm Z = OM4 50/125µm 3 – Fiber Count T = 12 fiber U = 24 fibers 4 – Cable Type Y = Indoor small diameter trunk cable 5 – Jacket Type L = Low Smoke Zero Halogen (LSZH) P = Plenum (OFNP) S = Standard performance/Standard polarity (MPO-LC or LC-LC) O = Optimized performance/Standard polarity (MPO-LC or LC-LC) 11 – Other A = Pulling eye end A N = No pulling eye (lengths less than 20 meters/60 feet only) 12 – Unit of Length M = Meters F = Feet 13, 14, 15 – Cable Assembly Length 005 – 100M 016 – 300 ft. Small diameter trunk cable assembly detaIl Key Up Key Up Male Female Key Down Key Down Male Female 24-Fiber Trunk Overall Length Between Connectors [1 meter] [1 meter] 12-Fiber Female MPO Connector 12-Fiber Trunk 12-Fiber Female MPO Connector Overall Length Between Connectors [1 meter] [1 meter] 12-Fiber Female MPO Connector 12-Fiber Female MPO Connector Please contact Panduit customer service for information on additional part number options. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 © 2014 Panduit Corp. ALL RIGHTS RESERVED. FBSP79--WW-ENG 10/2014