UZ706 SERIES 3 WATT ZENER DIODES High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Zener Voltage, VZ 6.8 to 400V Continuous Current See table Surge Current ( 8.3 ms) See table Surge Power See graph Power See lead temperature derating curve Storage and Operating Temperature -65 to +175°C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) ELECTRICAL SPECIFICATIONS @ 25°c TYPE* Nominal Zener Voltage † VZ @ lZT Test Current Max. Maximum Zener Impedance Temp. Coefficient Current +/- ZZ @ lZT Typ. Reverse Leakage § lZT MAXIMUM RATINGS lR @ VR 5% VR +/-10% VR TC @ lZT Maximum Continuous Current lZM Maximum Surge Current ‡ lS +/- 5% Tolerance Volts mA Ohms μA Volts Volts %/°C mA Amps UZ706 6.8 75 2 500 5.2 4.9 .04 440 10.0 UZ707 7.5 75 2 300 5.7 5.4 .04 400 8.0 UZ708 8.2 75 3 200 6.2 5.9 .05 360 7.0 UZ709 9.1 75 3 100 6.9 6.6 .05 330 6.0 UZ710 10.0 75 4 40 7.6 7.2 .06 300 5.0 UZ712 12 65 5 10 9.1 8.6 .07 250 4.0 UZ713 13 50 6 10 9.9 9.3 .07 230 4.0 UZ714 14 50 6 10 10.6 10.1 .07 210 4.0 UZ715 15 50 6 10 11.4 10.8 .07 200 3.0 UZ716 16 50 7 5 12.2 11.5 .07 185 3.0 UZ718 18 40 8 5 13.7 12.9 .08 170 2.0 UZ720 20 40 9 5 15.2 14.4 .08 150 2.0 UZ722 22 30 10 5 16.7 15.8 .08 135 2.0 UZ724 24 30 10 5 18.2 17.3 .08 125 1.5 UZ727 27 25 12 1 20.6 19.4 .09 110 1.5 UZ730 30 25 15 1 22.8 21.6 .090 100 1.5 UZ733 33 20 21 1 25.1 23.7 .090 90 1.2 UZ736 36 20 21 1 27.4 25.9 .090 85 1.0 UZ740 40 20 27 1 30.4 28.8 .095 75 1.0 Rev. 20150727 UZ706 SERIES 3 WATT ZENER DIODES High-reliability discrete products and engineering services since 1977 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) ELECTRICAL SPECIFICATIONS @ 25°c TYPE* Nominal Zener Voltage † VZ @ lZT Test Current Max. MAXIMUM RATINGS Maximum Zener Impedance Typ. Reverse Leakage Temp. Coefficient Current § +/lZT ZZ @ lZT lR @ VR 5% VR Maximum Continuous Current +/-10% VR TC @ lZT lZM Maximum Surge Current ‡ lS +/- 5% Tolerance Volts mA Ohms μA Volts Volts %/°C mA Amps UZ745 45 15 37 1 34.2 32.4 .095 65 0.8 UZ750 50 15 50 1 38.0 36.0 .095 60 0.8 UZ756 56 10 70 1 42.6 40.3 .095 55 0.7 UZ760 60 10 70 1 45.7 43.2 .095 50 0.6 UZ770 70 10 90 1 53.3 50.5 .095 45 0.6 UZ775 75 10 100 1 56.0 54.0 .095 40 0.5 UZ780 80 10 115 1 60.8 57.7 .095 35 0.4 UZ790 90 8.0 150 1 68.5 64.8 .095 30 0.4 Specify 20% voltage tolerance by changing first numeral of type number from 7 to 9 or from 1 to 3. Specify 10% voltage tolerance by changing first numeral of type number from 7 to 8 or from 1 to 2. † All zener voltages are measured with an automated test set using a 35 ms test time. Longer or shorter test times will have a corresponding effect on the measured value due to heating effects. § Zener impedance is derived from the 60-cycle AC voltage created when AC current with RMS value of 10% of DC zener test current is superimposed on the test current. Maximum current based on 3 watt rating, ‡ Figures shown are for a peak sinusoidal surge current of 8.3 ms duration using 60 cycle AC. The 8.3 ms square pulse rating is 71% of the value shown. Rev. 20150727 High-reliability discrete products and engineering services since 1977 UZ706 SERIES 3 WATT ZENER DIODES MECHANICAL CHARACTERISTICS Case: Digi A Polarity: Cathode band VF: IC = 1.0 A; VF = 1.35 V Max Rev. 20150727