Universal Temperature Sensor IC Linearizes Temperature Sensors with 0.1°C Accuracy

News Release  www.linear.com
Universal Temperature Sensor IC Linearizes Temperature Sensors with
0.1°C Accuracy
MILPITAS, CA – November 24, 2014 – Linear Technology Corporation introduces the LTC2983
high performance digital temperature measurement IC which directly digitizes RTDs,
thermocouples, thermistors and external diodes with 0.1°C accuracy and 0.001°C resolution. A
high performance analog front end combines low noise and low offset buffered ADCs with all
the necessary excitation and control circuits for each sensor. Measurements are performed under
the control of a digital engine combining all the algorithms and linearization required for each.
The LTC2983 provides a multiplexed high precision interface to virtually any sensor. It
precisely measures absolute microvolt level signals from thermocouples and ratiometric
resistance measurements from RTDs and thermistors, linearizes the results and outputs the
results in °C or °F. Up to twenty analog inputs are available and digitized measurements can be
output in Centigrade or Fahrenheit. The SPI interface works with virtually any digital system
and a comprehensive software support system with drop-down menus allows easy customizing
of the LTC2983.
The simple, yet feature-rich, LTC2983 interfaces with a wide variety of
temperature sensors, including type B, E, J, K, N, S, R, T thermocouples, 2,3, or 4-wire RTDs,
2.25kΩ to 30kΩ thermistors and temperature sensing diodes. The LTC2983 works with ground
referenced sensors without the need for amplifiers, negative supplies, or level shift circuitry.
Signals are simultaneously digitized with three, high accuracy, 24-bit Δ∑ ADCs using an internal
10ppm/°C reference. Automatic thermocouple cold junction compensation can be done using
Universal Temperature Sensor IC Linearizes Temperature Sensors with
0.1°C Accuracy page 2
any type of external sensor. Included on the chip are linearization algorithms for all common
sensor types. Custom sensors can be linearized with custom coefficients programmed into the
chip. Dual programmable excitation current sources feature current reversal and current ranging
to improve accuracy and reduce noise. To ensure resistive measurements are accurate, current
reversal eliminates thermocouple effects in the resistive sensor. Sensor specific fault detection
alerts the user of short circuits, open circuits, over temperature, under temperature, and ADC
overranging.
The LTC2983 is offered in commercial and industrial versions, supporting
operating temperature ranges from 0°C to 70°C and –40°C to 85°C respectively. The LTC2983 is
available today in a RoHS compliant, 7mm x 7mm LQFP-48 package. Pricing starts at 19.49
each in 1,000 piece quantities. For more information, visit www.linear.com/product/LTC2983.
Photo Caption: Complete 20-Channel Digital Temperature Measurement SoC
Summary of Features: LTC2983






Directly Digitize RTDs, Thermocouples, Thermistors & Diodes
Single 2.85V to 5.25V Supply
20 Flexible Inputs Allow Multiple Sensor Types
Automatic Thermocouple Cold Junction Compensation
Standard & User-Programmable Coefficients for Linearizing Thermocouples, RTDs & Thermistors
Configurable 2-, 3-, 4-Wire RTD Configurations

Measures Negative Thermocouple Voltages Without a Negative Supply
Automatic Burn Out, Short-Circuit & Fault Detection
Buffered Inputs Allow External Protection & Direct Interface to Resistive Sensors
Simultaneous 50Hz/60Hz Rejection
Includes 10ppm/°C (Max) Reference
48-Lead 7mm x 7mm LQFP Package





The USA list pricing shown is for budgetary use only. International prices may differ due to local
duties, taxes, fees and exchange rates.
Universal Temperature Sensor IC Linearizes Temperature Sensors with
0.1°C Accuracy
page 3
About Linear Technology Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visit www.linear.com
, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear
Technology Corp. All other trademarks are the property of their respective owners.
Press Contacts:
North America / Worldwide
UK & Nordic
John Hamburger, Director Marketing
Communications
[email protected]
Tel: 408-432-1900 ext 2419
Alan Timmins
[email protected]
Tel: +44-1-252-629937
Doug Dickinson, Media Relations Manager
[email protected]
Tel: 408-432-1900 ext 2233