A0-VS122PA600M7-L759F70 A0-VP122PA600M7-L759T target datasheet VINcoDUAL E3 1200 V / 600 A Features VINco E3 th ● Low VC Esat with the new 7 gen Mitsubishi chip generation ● Max Junction Temperature Tvjmax 175°C ● Solid cover technology for higher reliability ● Industry standard housing ● Press-fit pin and pre-applied Phase Change Thermal Interface Material available Schematic Target applications ● Industrial Drives ● Power Supply ● UPS Types ● A0-VS122PA600M7-L759F70 ● A0-VP122PA600M7-L759F70T Maximum Ratings Tj = 25 °C, unless otherwise specified Parameter Symbol Condition Value Unit 1200 V 559 A 1200 A 1092 W Half Bridge Switch Collector-emitter voltage Collector current VCES IC Tj = Tjmax Ts = 80 °C Repetitive peak collector current ICRM tp limited by Tjmax Total power dissipation Ptot Tj = Tjmax Gate-emitter voltage VGES ±20 V Maximum junction temperature Tjmax 175 °C Copyright Vincotech Ts = 80 °C 1 28 Apr. 2016 / Revision 1 A0-VS122PA600M7-L759F70 A0-VP122PA600M7-L759T target datasheet Maximum Ratings Tj = 25 °C, unless otherwise specified Parameter Symbol Condition Value Unit 1200 V 486 A 1200 A 742 W Half Bridge Diode Peak repetitive reverse voltage Continuous (direct) forward current VRRM IF Ts = 80 °C Tj = Tjmax Repetitive peak forward current IFRM Total power dissipation Ptot Maximum junction temperature Tjmax 175 °C Storage temperature Tstg -40…+125 °C Operation temperature under switching condition Tjop -40…(Tjmax - 25) °C 4000 V Creepage distance 18,1 mm Clearance 16,2 mm Ts = 80 °C Tj = Tjmax Module Properties Thermal Properties Isolation Properties Isolation voltage Comparative Tracking Index Copyright Vincotech Visol DC Test Voltage CTI tp = 2 s > 200 2 28 Apr. 2016 / Revision 1 A0-VS122PA600M7-L759F70 A0-VP122PA600M7-L759T target datasheet Characteristic Values Parameter Symbol Conditions VCE [V] VGE [V] VDS [V] VGS [V] VF [V] Value IC [A] ID [A] IF [A] Tj [°C] Min Typ Unit Max Half Bridge Switch Static Gate-emitter threshold voltage Collec tor-emitter saturation voltage V GE(th) 0,06 V GE = V CE 15 V CEsat 600 25 6 6,6 25 5,4 1,70 2,15 125 1,95 150 2,00 V V Collec tor-emitter c ut-off current I CES 0 1200 25 600 µA Gate-emitter leakage c urrent I GES 20 0 25 1500 nA Internal gate resistance rg 0,67 Input capacitance C ies 111000 Output capacitance C oes Reverse transfer capac itance C res Gate c harge Qg 0 10 25 Ω 3300 pF 1260 15 600 600 25 3600 nC 0,052 K/W 0,035 K/W Thermal Thermal resistance junc tion to case R th(j-c) Thermal resistance case to sink R th(c-s) phase-change material λ = 3,4 W /mK Half Bridge Diode Static Forward voltage Reverse leakage c urrent 600 VF 1200 IR 25 1,70 125 1,70 150 1,70 25 2,2 V 360 µA Thermal Thermal resistance junc tion to case R th(j-c) Thermal resistance case to sink R th(c-s) Copyright Vincotech phase-change material λ = 3,4 W /mK 3 0,084 K/W 0,044 K/W 28 Apr. 2016 / Revision 1 A0-VS122PA600M7-L759F70 A0-VP122PA600M7-L759T target datasheet Characteristic Values Parameter Symbol Conditions VCE [V] VGE [V] VDS [V] VGS [V] VF [V] Value IC [A] ID [A] IF [A] Tj [°C] Min Typ Unit Max Thermistor Rated resistance R Deviation of R100 ΔR/R Power dissipation 25 R100 = 493 Ω 100 P Power dissipation constant 5 -5 kΩ +5 % 25 245 mW 25 1,4 mW/K B-value B(25/50) Tol. ±2 % 25 3375 K B-value B(25/100) Tol. ±2 % 25 3437 K Vincotech NTC Reference Copyright Vincotech K 4 28 Apr. 2016 / Revision 1 A0-VS122PA600M7-L759F70 A0-VP122PA600M7-L759T target datasheet Ordering Code & Marking Version Ordering Code A0-VS122PA600M7-L759F70 A0-VS122PA600M7-L759F70-/3/ A0-VP122PA600M7-L759F70T A0-VP122PA600M7-L759F70T-/3/ without thermal paste with solder pins with thermal paste with solder pins without thermal paste with Press-fit pins with thermal paste with Press-fit pins Text NN-NNNNNNNNNNNN-TTTTTTTVV VIN WWYY LLLLL SSSS Datamatrix Name VIN Date code Lot Serial NN-NNNNNNNNNNNN-TTTTTTTVV VIN WWYY LLLLL SSSS Type&Ver Lot number Serial Date code TTTTTTTVV LLLLL SSSS WWYY Outline Pin table [mm] Pin X Y Function 1 7,24 -0,45 Therm1 2 11,06 -0,45 Therm2 3 60,58 -0,45 G12 4 64,4 -0,45 S12 5 87,26 -0,45 C12 6 - - Ph 7 - - Ph 8 37,72 57,95 G11 9 33,92 57,95 S11 10 - - 11 - - DCDC+ Copyright Vincotech 5 28 Apr. 2016 / Revision 1 A0-VS122PA600M7-L759F70 A0-VP122PA600M7-L759T target datasheet Pinout Identification ID Component Voltage Current Function T11,T12 IGBT 1200 V 600 A Half Bridge Switch D11,D12 FWD 1200 V 600 A Half Bridge Diode Rt NTC Copyright Vincotech Comment Thermistor 6 28 Apr. 2016 / Revision 1 A0-VS122PA600M7-L759F70 A0-VP122PA600M7-L759T target datasheet Packaging instruction Standard pac kaging quantity (SPQ) 24 >SPQ Document No.: Date: A0-Vx122PA600M7-L759F70x-T1-14 28 Apr. 2016 Standard Modification: <SPQ Sample Pages Product status definition Datasheet Status Product Status Target Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information, specifications, procedures, methods and recommendations herein (together “information”) are presented by Vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. Vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. No representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. It is reader’s sole responsibility to test and determine the suitability of the information and the product for reader’s intended use. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright Vincotech 7 28 Apr. 2016 / Revision 1