V23990-P823-F10-PM preliminary datasheet Output Inverter Application flowPACK 1 3rd gen 600V/50A General conditions 3phase SPWM VGEon = 15 V VGEoff = -15 V Rgon = 8 Ω Rgoff = 8 Ω IGBT Figure 1 Typical average static loss as a function of output current Ploss = f(Iout) 70 Ploss (W) 80 Ploss (W) FRED Figure 2 Typical average static loss as a function of output current Ploss = f(Iout) Mi*cosfi = 1 70 60 Mi*cosf i= -1 60 50 50 40 40 30 30 20 20 10 10 Mi*cosfi = -1 0 At Tj = 10 20 150 30 40 50 60 70 Iout (A) 0 80 10 At Tj = °C Mi*cosfi from -1 to 1 in steps of 0,2 20 150 30 40 50 60 70 Iout (A) 80 °C Mi*cosfi from -1 to 1 in steps of 0,2 IGBT Figure 3 Typical average switching loss as a function of output current Ploss = f(Iout) 30,0 Ploss = f(Iout) 14,0 12,0 fsw = 16kHz 25,0 FRED Figure 4 Typical average switching loss as a function of output current Ploss (W) Ploss (W) Mi*cosfi = 1 0 0 fsw = 16kHz 10,0 20,0 8,0 15,0 6,0 10,0 4,0 5,0 2,0 fsw = 2kHz fsw = 2kHz 0,0 0,0 0 At Tj = 10 20 150 30 40 50 60 70Iout (A) 0 80 At Tj = °C DC link = 320 V fsw from 2 kHz to 16 kHz in steps of factor 2 copyright by Vincotech 10 150 20 30 40 50 60 70 80 Iout (A) °C DC link = 320 V fsw from 2 kHz to 16 kHz in steps of factor 2 1 Revision: 2 V23990-P823-F10-PM preliminary datasheet Output Inverter Application flowPACK 1 3rd gen Phase Figure 5 Typical available 50Hz output current as a function Mi*cosfi Typical available 50Hz output current as a function of switching frequency Iout = f(Mi*cosfi) Iout (A) Iout (A) Th = 60°C Th = 60°C 70 60 60 50 50 Th = 100°C 40 30 30 20 20 10 10 0 At Tj = Iout = f(fsw) 80 70 -1,0 Phase Figure 6 80 40 600V/50A Th = 100°C 0 -0,8 -0,6 -0,4 150 -0,2 0,0 0,2 0,4 0,6 0,8 1,0 Mi*cosfi 1 At Tj = °C DC link = 320 V fsw = 4 kHz Th from 60 °C to 100 °C in steps of 5 °C 10 150 fsw (kHz) 100 °C DC link = 320 V Mi*cosfi = 0,8 Th from 60 °C to 100 °C in steps of 5 °C Phase Figure 7 Typical available 0Hz output current as a function Ioutpeak = f(fsw) of switching frequency Iout (Apeak) -1,00 -0,80 Iout (A) Phase Figure 8 Typical available 50Hz output current as a function of Iout = f(fsw, Mi*cosfi) Mi*cosfi and switching frequency 70 60 Th = 60°C -0,60 68,0-74,0 50 -0,40 62,0-68,0 56,0-62,0 -0,20 44,0-50,0 0,00 38,0-44,0 32,0-38,0 40 Mi*cosfi 50,0-56,0 Th = 100°C 30 0,20 26,0-32,0 20,0-26,0 0,40 20 0,60 10 0,80 0 1,00 1 2 4 8 16 32 64 1 fsw 10 At Tj = 150 °C At Tj = DC link = Th = 320 80 V °C DC link = 320 V Th from 60 °C to 100 °C in steps of 5 °C Mi = copyright by Vincotech 2 150 fsw (kHz) 100 °C 0 Revision: 2 V23990-P823-F10-PM preliminary datasheet Output Inverter Application flowPACK 1 3rd gen Inverter Figure 9 Typical efficiency as a function of output power efficiency=f(Pout) efficiency (%) Pout (kW) Inverter Figure 10 Typical available peak output power as a function of Pout=f(Th) heatsink temperature 20,0 18,0 100,0 2kHz 16,0 600V/50A 99,0 2kHz 98,0 14,0 97,0 12,0 96,0 10,0 95,0 16kHz 16kHz 8,0 94,0 6,0 93,0 4,0 92,0 2,0 91,0 0,0 90,0 60 At Tj = 65 70 150 75 80 85 90 95 100 Th ( o C) 0,0 At Tj = °C DC link = 320 V Mi = 1 cosfi = 0,80 fsw from 2 kHz to 16 kHz in steps of factor 2 5,0 150 10,0 15,0 20,0 Pout (kW) 25,0 °C DC link = 320 V Mi = 1 cosfi = 0,80 fsw from 2 kHz to 16 kHz in steps of factor 2 Inverter Figure 11 Overload (%) Typical available overload factor as a function of Ppeak / Pnom=f(Pnom,fsw) motor power and switching frequency 400 350 300 250 200 Switching frequency (kHz) 150 Motor nominal power (HP/kW) 100 002 / 001 002 / 001 003 / 002 005 / 004 008 / 006 010 / 007 1 1120 840 560 336 224 168 2 1101 826 551 330 220 165 4 1064 798 532 319 213 160 8 993 745 497 298 199 149 16 866 649 433 260 173 130 At Tj = 150 °C DC link = Mi = 320 1 V cosfi = 0,8 fsw from 1 kHz to 16kHz in steps of factor 2 Th = 90 °C Motor eff = 0,85 copyright by Vincotech 3 Revision: 2 V23990-P823-F10-PM preliminary datasheet PRODUCT STATUS DEFINITIONS Datasheet Status Target Preliminary Final Product Status Definition Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. First Production This datasheet contains preliminary data, and supplementary data may be published at a later date. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. Full Production This datasheet contains final specifications. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information given in this datasheet describes the type of component and does not represent assured characteristics. For tested values please contact Vincotech.Vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. copyright by Vincotech 4 Revision: 2